Hot Tools Pro Signature HTST2589ED1 Dual Plate Straightener Owner’s Manual

Hot Tools Pro Signature HTST2589ED1 Dual Plate Straightener

Product Information

The Dual Plate Straightener (model number HTST2589ED1) is a household appliance designed for straightening hair. It is equipped with four floating plates that deliver a smooth glide for faster and straighter results with fewer passes, reducing the risk of damage. The straightener is equipped with an automatic worldwide dual voltage feature that automatically adjusts to the proper voltage. It also features an automatic shut-off function that turns off the appliance after one hour of inactivity. The plates of the straightener can be locked together with a plate-locking switch for easier storage. The appliance also includes a cool tip, LED digital display, dual heater control switch, temperature select buttons, power button, and swivel cord. The appliance is virtually maintenance-free and does not require lubrication.

Product Usage Instructions

1. Read all instructions before using the appliance. These instructions are also available on the manufacturer’s website.
2. Plug in the appliance and turn it on using the power button.
3. Select the desired temperature using the temperature select buttons. For best results, start with the lowest setting and gradually increase the temperature as needed.
4. Wait for the LED digital display to show the desired temperature before using the appliance.
5. Separate a section of hair and place it between the plates of the straightener.
6. Gently clamp the plates together and glide the straightener down the length of the hair, starting at the roots and moving towards the ends.
7. Repeat on all sections of hair until the desired style is achieved.
8. After use, turn off the appliance and unplug it from the power source.
9. Allow the appliance to cool before storing it in a safe, dry location out of reach of children.

Note: Do not engage the plate-locking switch during styling, and do not lock the plates onto hair, as serious damage to hair or even injury could result. If any malfunction occurs, do not attempt to repair the appliance, as it has no user-serviceable parts.

IMPORTANT SAFETY

SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions before using this appliance. These instructions are also available on our website. Please visit www.helenoftroy.com/emea- en/ This appliance is intended for household use only.

• WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• This appliance can be used by children aged from 8 years and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• WARNING: Do not leave the appliance unattended.
• Do not allow bare skin or the eyes to come into contact with any heated surface on the appliance when in use.
• Do not place the appliance on any heat-sensitive surfaces when hot or plugged into the mains.
• Always unplug the appliance when not in use.
• WARNING: Do not use this appliance on synthetic hair or wigs.
• NOTE: Use on dry hair only.
• WARNING: Should this product malfunction, do not attempt to repair it. This appliance has no user serviceable parts or components.

OPERATING INSTRUCTIONS

Automatic Worldwide Dual Voltage
This appliance will automatically adjust to the proper voltage.

Dual Plate Straightener
Includes (4) floating plates that delivers a smooth glide for faster, straighter results. Fewer Passes. Less Damage.

Automatic Shut-Off
This appliance has an Automatic Shut-Off feature. Should you forget to turn off the iron, it will automatically shut off after 1 hour.

Plate-locking Switch
For easier storage, the plates of the straightener can be locked together. To engage the locking switch, first turn the appliance off and unplug it. Push the switch up while pressing the handles together to lock the plates. To unlock, press the handles together and push the unlock switch down.
WARNING: DO NOT engage the plate-locking switch during styling, and DO NOT lock the plates onto hair, as serious damage to hair or even injury could result.

Start-up

• Plug the straightener into an electrical outlet
• Press the Power Button (On/Off) and the LED Temperature Display will start blinking showing the default setting or the last memory setting.

Adjusting Plate Temperatures:

• Both Left (L) and Right (R) plates, which are labeled for easy reference, can be set at the same temperatures or adjusted to have one side hotter or cooler than the other.
• Slide the Dual Heater Control Switch to the “L” to set the temperature on the Left plates.
• Slide switch to the “R” to set the temperature on the Right Plates. To set both plates at the same temperature, move switch to the “LR” position.

Caution: Straighteners with heat controls operate at high temperatures when used on high settings. When using for the first time, begin with the LOWEST setting. Please read all instructions carefully before using. For best results, follow these guidelines:

Heat Selection Hair Type

• 100 °C – 165 °C For fine, thin hair
• 165 °C – 193 °C For normal, medium-textured hair
• 195 °C – 235 °C For wavy, thick, coarse hair

Helpful Styling Hints

• Hair should be clean and dried completely before using any styling tool.
• Separate a 2.5 cm section of hair, gently place hair between the Straightening plates and clamp the straightener down firmly on the hair. You will achieve professional results if you work from the scalp to the ends of your hair.
• Carefully slide the iron along the isolated section, making sure the hair is heated and straightened all the way to the ends. The ends will probably require less heat than the hair which grows closer to the scalp.
• For best results, hold end of hair while smoothing the hair section.
• To create flips or curls, use rounded edge of Straightening Plates to curl ends out or under.
• To remove hair from the flat iron, release pressure and allow the hair to gently slip out from the Straightening Plates.
• The straightening process does not require overlapping; separate each section of hair and work on it as indicated above.
• Allow hair to cool before combing or brushing.
• Repeat the process until you have achieved the look you desire.
• When styling is complete, press and hold the Power Button (ON/OFF) to turn off. Unplug the appliance and allow it to cool before storing.

USER MAINTENANCE INSTRUCTIONS

Maintenance
Your appliance is virtually maintenance-free. No lubrication is needed. Keep heated surfaces clean and free of dust, dirt, and hair spray. If cleaning becomes necessary, unplug the appliance from the power source and wipe the exterior with a damp cloth. If the cord becomes twisted, untwist prior to use.
WARNING: If any malfunction occurs, do not attempt to repair. This appliance has no user-serviceable parts.

Storage
Unplug when not in use. Allow appliance to cool and store out of reach of children in a safe, dry location.

Features:

• A. Cool Tip
• B. Straightening Plates
• C. LED Digital Display
• D. Dual Heater Control Switch
• E. Temperature Select Buttons
• F. Power Button
• G. Locking Switch
• H. Swivel Cord

Guarantee and Service

Your Hot Tools appliance is guaranteed against defects under normal use for 2 years from the original date of purchase. If your product does not perform satisfactorily because of defects in materials or manufacture, within the warranty period, it will be replaced. Please retain your till receipt or other proof of purchase for all claims within the warranty period. The guarantee becomes void if the proof of purchase is not presented. Simply take the appliance back to the retailer from where purchased, along with a valid till receipt, for exchange free of charge. This guarantee does not cover defects which have occurred due to misuse, abuse or are caused by failure to follow the instructions contained within this manual.
UK only: This does not affect your consumer statutory rights.
The manufacturing date is given by the 4 digit Batch Number marked on the rear of the product. The first 2 digits represent the week of manufacture, and the last 2 digits represent the year of manufacture. Example: 3420 – product manufactured week 34 of the year 2020.
The appearance of this appliance may differ from the illustration.

This appliance complies with EU legislation 2012/19/EU on end of life recycling. Products showing the ‘Crossed Through’ wheeled bin symbol on either the rating label, gift box or instructions must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of appliance in normal household waste. Your local appliance retailer may operate a ‘take-back’ scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling. This product carries the CE mark and is manufactured in conformity with the Electromagnetic Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU, the ROHS Directive 2011/65/EU and the ERP Directive 2009/125/EC. Product Support: +44 (0) 207 949 0115

Kaz Europe Sàrl
Q-Center, Chaux 4
CH-1030 Bussigny – Switzerland
Hot Tools® and Pro Signature™ are trademarks of Helen of Troy Limited.
© 2022, Helen of Troy. All rights reserved.

INFORMATION

• Start Date 20JAN22
• Model# HTST2589ED1
• UK/E DI
• Agile AW# AW016375
• AW Issue# No#: 2 Date 28JUN22
• Languages 11
• File Name htssstib.HTST2589ED1.AW016375.INDD
• Designer Loc Pham
• Factory Fenda
• Bar Code# n/a

Packaging Specifications

• Dimensions H178mm x W95mm
• Material 70gsm Wood free paper
• Finishes booklet, stritched
• Colours Black + 1 Spot

Proof Stages

• 21JAN22 Created artwork based on UKE version, sent for review
• 25JAN22 Updated as per comments, sent for review
• 14FEB22 Added missing ZA Safety Instructions
• 25FEB22 Removed UKCA logo, uploaded for production
• 28JUN22 Added UKCA logo for temporary production. Uploaded for production No#: 2 Date 28JUN22

Approvals

• BM/MKT 25JAN22 Camille Bosson
• BM/MKT 28JUN22 Simona Tomassini
• MKT MNG — —
• Design 25FEB22 Loc Pham
• Eng UK/E 25JAN22 James Briscoe
• Comp UK/E 25JAN22 Seray Sahin
• Eng APO 25JAN22 A.Deng/C.Tang/X.Zhang
• Comp APO 25JAN22 John Guo
• Legal — —
• Licensor — —

Helen of Troy – Kaz Europe Sàrl
Creative Department
Place Chauderon 18
1003 Lausanne
Switzerland

References

• EMEA | Helen of Troy

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>