Kanlux 36572 ABETE LED Outdoor Light Instruction Manual
- June 13, 2024
- Kanlux
Table of Contents
ABETE LED
36572 ABETE LED Outdoor Light
Instruction Manual
36572 ABETE LED Outdoor Light
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used either indoors or outdoors. [ABETE LED EL 20 SE] Product automatically lights up when moving objects are detected. [ABETE LED EL 20 SE] Product offers the possibility of adjusting operation time (TIME) and frequency (NIGHT/DAY).
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the
product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature. The light source becomes heated to a high
temperature. Product can only be supplied by rated voltage or voltage within
the range provided. It’s forbidden to use the product with damaged protective
cover. Product must not be used in unfavourable conditions, e.g. dust, water,
moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
Non-demountable product. Not suitable for independent repairs. ATTENTION! Do
not look directly at LED light beam. [ABETE LED EL 20 SE] Moving object (e.g.
vehicles) may cause random activation of the sensor.
[ABETE LED EL 20 SE] In the area of strong electromagnetic interference the
functioning of the product may be disrupted.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Rated power.
P3: Rated luminous flux.
P4: The specified luminous flux refers to the light source (LED module) used.
P5: This product is equipped with a light source with energy efficiency class E
P6: Colour temperature.
P7: Rated durability.
P8: Certificate of Conformity confirming the quality of production in accordance
with approved standards on the territory of the Customs Union.
P9: Rated durability.
P10: Environmental operating temperature range that the product can be exposed
to.
P11: Class I. A product in which protection against electric shock is provided
not only by means of basic insulation but also through additional safety
measures, i.e. extra protective circuit to which protective conductor of the
fixed feeding installation needs to be connected.
P12: Product can be used either indoors or outdoors.
P13: Protection against solid foreign objects bigger than 1,0mm provided.
Protection against splashing water provided.
P14: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P15: The product can only be used in a lighting fixture with protective glass.
Immediately stop using the product if the outer bulb is cracked or broken. The
chipped globe, screen or protective shield must be replaced immediately.
P16: The product is not compatible with lighting dimmers.
P17: Micro-gap between transmitter contacts.
P18: The LED light source can only be replaced by qualified personnel (Kanlux
service only).
P19: Any control panel or control equipment can only be replaced by qualified
personnel (Kanlux service only).
P20: The product is compliant with all relevant United Kingdom regulations.
P21: The product meets the requirements of technical regulations applicable in
Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P22: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising.
Products labelled in this way should be returned to a collection facility for
waste electrical and electronic goods. Information on collection centres is
provided by local authorities or sellers of such goods. Used items can also be
returned to the seller when new product is purchased, in quantity no larger
than the purchased item of the same type. The above rules regard the EU area.
In the case of other countries, regulations in force in a given country must
be applied. Contacting the distributor of our products in
a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.
|
---|---
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>