ergotron 98-650-251 Care Fit Combo Dual Monitor Kit User Guide
- June 13, 2024
- ERGOTRON
Table of Contents
ergotron 98-650-251 Care Fit Combo Dual Monitor Kit
Product Information
- Product Name: &DUH)LWTM
- Manufacturer: &RPER’XDO0RQLWRU.LW
- Website: www.ergotron.com
Contact Information:
- USA: 1-800-888-8458
- Europe: +31 (0)33-45 45 600
- China: 400-120-3051
- Japan: japansupport@ergotron.com
Product Usage Instructions
To use the product, follow these steps:
- Unpack the product and ensure all components are present.
- Visit the manufacturer’s website at www.ergotron.com for any updates or additional resources.
- Refer to the user manual for detailed instructions on assembly and installation.
- Ensure the product is placed on a stable and level surface.
- Connect any necessary cables or accessories according to the user manual.
- Adjust the product to your desired height or position using the provided adjustment mechanisms.
- Make sure all adjustments are secure and stable before use.
- If experiencing any issues or need assistance, refer to the contact information provided above for customer support.
Note: Please read and understand the complete user manual before using the product for proper usage and to ensure your safety.
Tools Needed
Weight Capacity:
CAUTION: DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
Installation Instructions
Rotate – Portraited Landscape
Adjustment Step
Important! You will need to adjust this product after installation is
complete. Make sure all your equipment is properly installed on the product
before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are
too easy or difficult or if product does not stay in desired positions, follow
the adjustment instructions to create smooth and easy movements. Depending on
your product and the adjustment, it may take many turns to notice a
difference. Any time equipment is added or removed from this product,
resulting in a change in the weight of the mounted load, you should repeat
these adjustment steps to ensure safe and optimum operation.
Power tools NOT recommended
- Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:
- Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:
- DO NOT exceed torque of 100 cm-kg (86 in-Ib).
Lift – Up and down
- Power tools NOT recommended
- Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:
- Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:
- DO NOT exceed torque of 30 cm-kg (26 in-Ib).
Tilt – Forward and Backward
Power tools NOT recommended
- Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:
- Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:
DO NOT exceed torque of 40 cm-kg (34 in-Ib).
Max Monitor Thickness (before interfering with the folded up
worksurface/keyboard tray):
Safety
Caution: Leave enough slack in cable to allow full range of motion. To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.
WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal iniury and or equipment damage!
Learn more about ergonomic computer use a t: www.ergotron.com/ergonomics
For the latest User Installation Guide please visit:
www.ergotron.com
For Warranty visit:
www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
NOTE: When contacting customer service, reference the serial
number.
www.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-45 45 600
China: 400-120-3051
Japan: japansupport@ergotron.com
*© 2023 Ergotron, Inc. All rights reserved. CareFit is a registered
trademark of Ergotron, Inc.**
While Ergotron, Inc. makes every effort to provide accurate and complete
information on the installation and use of its products, it will not be held
liable for any editorial errors or omissions (including those made in the
process of translation from English to another language), or for incidental,
special or consequential damages of any nature resulting from furnishing this
instruction and performance of equipment in connection with this instruction.
Ergotron, Inc. reserves the right to make changes in the product design and/or
product documentation without notification to its users. For the most current
product information, or to know if this document is available in languages
other than those herein, please contact Ergotron. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording or otherwise
without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan,
Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is
a registered trademark of Ergotron, Inc.