VEVOR 110 x 46 Inch Clear Table Cover Protector User Manual
- June 13, 2024
- VEVOR
Table of Contents
110 x 46 Inch Clear Table Cover Protector
Technical Support and E-Warranty Certificate
www.vevor.com/support
PVC TABLE MAT
INSTRUCTIONS
We continue to be committed to provide you tools with competitive price. “Save
Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there is any
technology or software updates on our product.
APPLICATION SCENARIO
- Although PVC tablecloth have good high temperature resistance, it ‘s still necessary to maintain a certain safety distance from fire sources.
- It is recommended to replace the tablecloth with a new one if it becomes hard, tears, or has been used for too long.
- Due to packaging reasons, some tablecloth will have a little smell when they are received, which is a normal phenomenon, and the smell can be removed by blowing on the balcony or washing with detergent and drying in the sun.
- When unpacking, please do not use sharp knives to avoid damage to the tablecloth.
- Due to physical shrinkage, it is recommended to buy a larger size.
- Avoid prolonged exposure to sunlight to prevent yellowing of the product.
PRODUCT ADVANTAGES
TIPS
- Before using the product for the first time, peel off any promotional materials and packaging materials, and check that the product are clean and free of dust. If necessary, wipe them over with a damp cloth.
- Place the product in a clean place to unfold. You can use a hot air cylinder to adjust the temperature to the middle range, about 10cm from the surface of the product.
- Using hot air to blow the product can better make it flat.
- Wipe the area where the product needs to be laid with a damp cloth to make sure there are water droplets on the surface.
- Spread the product flat on the surface to be placed.
- Use a plastic sheet to scrape out the bubbles.
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>