VEVOR AH-310 Airbrush Spray Booth User Manual

VEVOR AH-310 Airbrush Spray Booth

Product Information

• Model: AH-310
• Website for Technical Support and E-Warranty Certificate: www.vevor.com/support
• Email for Customer Service: [email protected]

Please note that the appearance of the product may vary from the images shown in the manual. VEVOR reserves the right to make technology or software updates without prior notification.

Product Usage Instructions

General Safety Rules

• The unauthorized conversion, modification, or disassembly of the product is not allowed due to safety and approval reasons (CE).
• The product is not a toy and must be kept out of the reach of children. Use caution when children are present.
• The product is intended for use in dry, indoor locations only. Do not use in damp areas or bathrooms to avoid the risk of electric shock.
• Avoid exposing the product and its accessories to damp or extreme temperatures.
• Do not leave packing materials unattended as they may pose a danger to children.

Product Handling

• Avoid dropping, falling, or applying excessive pressure or tensile forces to the product, as it may damage or limit its function.
• Always position the device away from combustible or easily inflammable materials. Ensure the rotary table is centered within the housing.
• Allow the device to run for approximately 2 minutes after each application for self-cleaning purposes.
• Turn off the device and unplug it from the mains when not in use.
• If the filter becomes contaminated with paint, replace it with a clean filter for efficient operation.
• Avoid using poisonous, flammable, or explosive paints or materials to prevent health damage.
• Ensure proper ventilation during product usage.
• Do not extend the extraction pipe as it may impair the extraction performance.

Specific Usage Guidelines

• In commercial institutions, comply with the accident prevention regulations of the employer’s liability insurance association for electrical systems and operating facilities.
• In schools, training centers, and hobby and self-help workshops, trained personnel should supervise the use of the product responsibly.

We continue to be committed to providing you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

• [email protected].

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

WARNING:

1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

GENERAL SAFETY RULES

• Please read the entire operating instructions before using the products for the first time; They contain important information about the correct operation.
• The guarantee/warranty will be void if damage is incurred resulting from non-compliance with the operating instructions. Liability for any and all consequential damage is excluded!
• We do not assume any liability for damage to property or personal injury caused by improper use or the failure to observe the safety instructions! In such cases, the guarantee/warranty will be void
• The unauthorized conversion, modification of disassembly of the products is inadmissible because of safety and approval reasons (CE).
• The product is not a toy and must be kept out of the reach of children. Particular care must therefore be exercised if children are present.
• The product must not get damp or wet, it is only intended for use in dry, indoor locations(not bathrooms or similarly damp areas). There is a risk of a fatal electric shock.
• Do not expose the product or its accessories to extremely high or low temperatures.
• Do not leave packing materials unattended. They may become dangerous playing material for children.
• Dropping, falling, pressure or tensile forces could destroy or at least limit the function of the product.
• Never position the device in the vicinity of combustible or easily inflammable materials.
• Always make sure that the rotary table on which the object is placed is located in the center of the housing!
• The device should continue to run for approximately 2 minutes after each application, which ensures the self-cleaning of the device!
• Always turn the device off and pull the mains plug out when the device is not in use!
• If the filter is contaminated with substantial amounts of paint, it can no longer work efficiently and must be replaced with a clean filter.
• To prevent health damage, never use poisonous, flammable, or explosive paints or materials!
• Always ensure proper ventilation!
• To not impair the extraction performance, you may not extend the extraction pipe!
• In commercial institutions, the accident prevention regulations of the employer’s liability insurance association for electrical systems and operating facilities are to be observed.
• In schools, training centers, hobby, and self-help workshops, the use of the product must be supervised by trained personnel in a responsible manner.
• If you have reason to assume that safe operation is no longer possible, disconnect the device immediately and secure it against inadvertent operation.

It can be assumed that safe operation is no longer possible if:

• the device shows visible signs of damage,
• the device no longer functions,
• after a longer period of storage under unfavorable conditions,
• following heavy stress during transportation.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS

STRUCTURE DIAGRAM

COMPONENTS

OPERATING INSTRUCTIONS

3. Respectively unfold the side plate on both sides, align them with the hole positions of the lamp cover plate, and fasten them.| 4. Fix the air-guide connector of the duct on the spray booth.
5. Connect the duct to the connector.| 6. Fasten the duct with a screwdriver.
7. Extend the hose.| 8. Fix the duct head on the hose.
---|---
9. The assembly is finished.| 10. Plug the cord adapter and connect it to a power pack.
11. Turn on the switch, the machine will start working.

MAINTENANCE

1. When the product is finished, it is recommended to dry the product and put it away.
2. Do not use damaged device.
3. When cleaning products, be sure to cut off the power supply, then clean the product with a suitable cleaner.

Correct Disposal

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

Address:
Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai.

• SHUNSHUN GmbH
  Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany.

• Pooledas Group Ltd
  Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom.

Made in China.

Technical Support and E-Warranty Certificate www.vevor.com/support.

References

• Contact Us – Official VEVOR Support
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>