VEVOR YC0003 Heavy Duty Clothes Rack User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR YC0003 Heavy Duty Clothes Rack User Manual
Product Information
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol,drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the Garment Racks.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area
Use precautions
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities.
- Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Garment Racks.
- Use as intended only.
- Inspect before every use; do not use if parts are looseor damaged.
PARTS LIST
-
Mesh x8
-
Upper Pipe x8
-
Middle Pipe x8
-
Lower Pipe x8
-
Hanging Pipe x4
-
Pothoolc x2
-
Metal-SheePothook x8
-
Clamping Place x74
-
Screw x8
-
Wrench x1
-
Ribbon Weaving x1
-
Expand Nails xl
-
SELFTapping Screw x1
ASSEMBLY STEP
COMPLETION
PRODUCT PARAMETER
| Model | YC0003 |
|---|---|
| Safe Loading Weight | 300 kg |
| Product Size | 17404501800 mm |
| Net Weight | 16.2 kg |
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA
STREETEASTWOODNSW2122AustraliaImported to USA: Sanven Technology Ltd.Suite
250, 9166 AnaheimPlace,
RanchoCucamonga, CA 91730
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
Made In Chin
NEED HELP? CONTACT US!
Have product questions? Need technical support? Pleasefeel freetocontact us:
[email protected]
Technical Support and E-Warranty Certificate
www.vevor.com/support
