VEVOR RLMF3-E Full Motion TV Mount User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR RLMF3-E Full Motion TV Mount
Product Information
Product: TV Wall Mounts
Model: RLMF3-E
Manufacturer: VEVOR
Safety Instructions
- Read all manual instructions carefully before operating the product.
- Assemble the product according to the provided instructions to avoid hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean, well-lit, and free of bystanders during assembly.
- Do not assemble the product when tired or under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble the product on a flat, level, hard, and smooth surface capable of safely supporting the TV Wall Mounts.
- For additional information regarding the parts, refer to the Assembly Diagram in the manual.
- Inspect the product before every use and do not use if any parts are loose or damaged.
- Do not use the product for any purpose not explicitly specified by the manufacturer.
Product Usage Instructions
Step 1: Attach Brackets to TV
- Measure the TV hole pattern.
- Remove the faceplate from the brackets. Save the screws for use in Step 3.
- Configure the TV brackets.
- Select appropriate TV screws.
- Attach the TV brackets to the TV.
Step 2: Attach Wall Plate to Wall
Choose the appropriate installation method:
- Wood Stud Installation:
1. Follow the instructions provided for wood stud installation.- Solid Concrete Wall Installation:
1. Caution: Use the provided anchors only for solid concrete and concrete block walls. Do not use them in drywall or wood studs.
2. Follow the instructions provided for solid concrete wall installation.Step 3: Hang and Secure TV to the Wall Plate
Use the saved screws from Step 1 to hang and secure the TV to the wall
plate.
Step 4: Adjustments
Make any necessary adjustments to ensure proper positioning of the TV.
Product Parameter
- Model: RLMF3-E
- Safe Loading Weight: [Safe Loading Weight]
- Product Size: [Product Size]
- Net Weight: [Net Weight]
Please refer to the original user manual or contact VEVOR customer service at [email protected] for any further assistance or technical support.
We continue to be committed to providing you tools with at a competitive
price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represent an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:RLMF3-E
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: at [email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the TV Wall Mounts.
For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- This product is designed for use in wood studs and solid concrete walls. -Do not mount on drywall alone.
- Do not exceed the maximum weight capacity of this product.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not use this product for any purpose not explicitly specified by the manufacturer.
- Inspect before every use; do not use if parts are loose or damaged.
- Manufacture is not responsible for damage or injury caused by incorrect assembly or use.
TOOLS NEEDED
HARDWARE INCLUDED
ASSEMBLY STEP
STEP1 Attach Brackets to TV
-
STEP 1-1 Measure TV Hole Pattern
-
STEP 1-2 Remove Faceplate
-
STEP 1-3 Configure TV Brack
-
Important: Attach extended arms to faceplate using Carriage bolts L and Nuts M Do not tighten the screws completely before the next step. ****
-
STEP 1-4 Select TV Screws
-
STEP 1-5 Attach the TV Brackets
-
a.FIat – Panel TV(Screw and Washer) When you select the M8 Screws EF , the washer I is not necessary
Caution : In the last step, all 8 nuts M MUST BE tightened firmly -
b.Curved TV(Spacer,Screw and Washer) When you select the M8 Screws EF the washer I is not necessary
Caution: In the last step, all 8 nuts M MUST BE tightened firmly.
-
STEP 2 Attach Wall Plate to Wall
- STEP 2A Wood Stud Installation
- STEP 2B Solid Concrete Wall Installation
Caution: These anchors are for solid concrete and concrete block walls ONLY DO NOT use them in drywall or wood studs.
STEP 3 Hang and Secure TV to Wall Plate
STEP4 Adjustments
- STEP 4-TTV leveling adjustments
- STEP 4-2Jilting angle adjustments
PRODUCT PARAMETER
| Model | RLMF3-E |
|---|---|
| Safe Loading Weight | 45 kg |
| Product Size | 32025060 mm |
| Net Weight | 2.78 kg |
Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support