TurboTronic TT-MF8 Corded Stick Vacuum Cleaner Instruction Manual

TurboTronic TT-MF8 Corded Stick Vacuum Cleaner

Product Information

The Corded Stick Vacuum TT-MF8 is a versatile vacuum cleaner designed for dry use only. It features a powerful motor, a dust tank with a release button, an on/off switch, a tube, a brush, and a 2-in-1 crevice tool with an extendable brush. The vacuum cleaner comes with an adaptor for charging the battery unit.

Safety Advice & Cautions

• This vacuum cleaner can only be used on dry surfaces. Do not suck water, liquid, or other wet objects into the product to avoid the risk of electric shock.
• Avoid using the vacuum cleaner to suck powders or big objects to prevent damage to the motor or blockage of the vacuum cleaner.
• Use a dry cloth to clean the vacuum cleaner. Do not use gas or liquid that can crack or fade the surface.
• Avoid using or storing the vacuum cleaner under extreme temperatures. The suggested indoor temperature range is 0-40°C. Store the product in a cool and dry environment, away from prolonged exposure to sunlight.
• Fully recharge the battery before first use or after long-term storage. If the product is not used for an extended period, recharge and use the battery at least once every three months.
• After fully recharging the vacuum cleaner, unplug the adaptor. Do not pull the power cord directly.
• If the working time of the vacuum cleaner decreases due to low battery capacity, replace the battery unit with a new one.
• Dispose of the battery unit safely through recycling. The battery unit is only intended for use with this vacuum cleaner and should not be used for other purposes. Charge it only with the provided adaptor and avoid disassembling it to prevent damage or short circuit. Keep the battery unit away from high-temperature objects, fire, sharp objects, and electric shock hazards.
• If the vacuum cleaner malfunctions or any parts break, do not attempt to disassemble it. Contact the appointed maintenance or service center for professional repairs.
• Keep the vacuum cleaner and battery unit out of reach of children to prevent accidents.

Product Usage Instructions

1. Assembling:
2. Insert the filter onto the cone inside the dust cup.
3. Insert the upper end of the tube into the lower end of the battery unit via the adaptor.
4. Using:
5. Plug the vacuum cleaner into a power source.
6. Press the on/off switch to start or stop the vacuum cleaner.
7. Use the tube, brush, or 2-in-1 crevice tool with an extendable brush to clean different surfaces and areas.
8. Empty the dust tank when it becomes full by pressing the dust tank release button.
9. Clean and Store:
10. Wash both the steel mesh and sponge net filters when necessary. Ensure they are completely dry before reusing.
11. Store the vacuum cleaner in a cool and dry environment, away from direct sunlight.

Dear Customer
We congratulate you on the purchase of this TurboTronic Corded cyclonic stick vacuum cleaner, which thanks to the 2 in 1 crevice tool with an extendable brush, the floor nozzle and the suction pipe, allows you to vacuum even hard- to-reach places easily. Please read these operating instructions carefully before installation and commissioning in order to familiarize yourself with your new device and to achieve maximum operational safety. In particular, the safety regulations must be observed to avoid accidents and damage. We recommend that you keep the instructions carefully for future reference.

SAFETY ADVICE & CAUTIONS

Read this instruction manual carefully before operating the unit and keep it for future use. Failure to observe and comply with these instructions may result in an accident.

WARNINGS

• This vacuum cleaner can only be used for dry purposes only. Water, liquid, and other wet objects are prohibited to be sucked into the product. Do not water or spill liquid onto the vacuum cleaner. If that happens, it will increase the risk of electric shock.
• Do not use the vacuum cleaner to suck powders such as flour, cement, or other big objects, or the motor can be broken or make the vacuum cleaner blocked.
• Please use a dry cloth to clean the vacuum cleaner. Please do not use gas or liquid that can make the surface crack or color fade.
• Please do not use or store the vacuum cleaner under high or low temperatures, the suggested use temperature is 0。-40。C indoors. Please store the product in a cool and dry environment. Please avoid long-time sunshine on the product.
• Please fully recharge the battery, when first used or used after a long time of storage. If the product is not used for a long time, please make sure the battery is recharged and used every three months at least.
• When the vacuum cleaner is fully recharged, please unplug the adaptor. Please do not pull the power cord directly.
• When working time goes shorter, caused by low battery capacity, please buy a new battery unit to replace it.
• Do not litter the battery unit and it should be safely recycled.
• The battery unit can only be used for this vacuum cleaner, please do not use it on other purposes, and can only be charged with the adaptor with the vacuum cleaner in the package, do not disassemble the battery unit in case of damage or a short circuit. Do not place the battery unit close to the high temperature objects or fire, do not insert the battery unit with sharpened objects or break the battery in case of electric shock.
• If the vacuum cleaner cannot work or some parts broken, in order to avoid dangers, please do not disassemble it privately, send it to the appointed maintenance or service center and get it repaired by a professional after-sales
• Please make sure the child can not touch or use the vacuum cleaner and charge the battery unit in case of danger.

| Indicates reading and reviewing instructions to understand the operation and use of the product.
---|---
| Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if the warning included with this symbol is ignored.
| Take care to avoid contact with hot surfaces. Always use hand protection to avoid burns.
| For indoor and household use only.

PARTS LIST

1. Cable
2. Outlet steel mash & sponge net filter
3. Motor unit
4. Dust tank release button
5. Dust tank
6. On/off
7. Tube
8. Brush
9. Adaptor
10. 2-in-1 crevice tool with extendable brush

PACKING LIST

ASSEMBLING

Assembly dust cup unit

1. Put filters into the dust cup, twist the cone, and match the cone’s pins into the grooves inside the dust cup.
2. Insert filter onto the cone

Assembly dust tank with motor unit

1. Put the dust cup to pins on the motor unit’s lower edge
2. Revolve the dust cup till the “Click “sound heard

Brush, tube, and main body assembled

1. Insert the upper end of the power brush into the lower end of the tube
2. Insert the upper end of the tube into the lower end of the battery unit via the adaptor

HOW TO ASSEMBLE THE ACCESSORIES

Accessory assembled into the main unit
2 1 tool just insert into the main unit hole and make them inserted firmly

Assemble the accessories to the tube.
Insert the round end of either 2 in 1 tool or furniture tool into the lower end of the tube, till a click sound is heard Please refer to picture 8

USING

ON/OFF
PRESS THE ON/OFF BUTTON AND SPEED CONTROL BUTTON TO START THE VACUUM CLEANER, PRESS THE BUTTON AGAIN TO ADJUST THE VACUUM CLEANER WORK TO HIGH/LOW SPEED.

ACCESSORY: 2 IN 1 TOOL

1. Insert 2 in 1 tool into the main unit, then push the dusting head back. This form can clean sofa gap, wall corners, stairs, keyboards and other narrow places
2. Insert 2 1 tool into the main unit, and then push the dusting head back till it is locked. This form can clean furniture, home appliances, and bookshelves.
3. Insert 2 1 tool into the tube and then push the dusting head back till it is locked. Insert the other end of the tube into the main unit. This form can clear roofs or other high places.

Main motorized brush
Connect the brush with a tube, then use the motorized brush to clean.

CLEAN AND STORE

Empty dust

1. Press the motor unit release button to divide the motor unit from the battery unit.
2. Release the button to empty the dust from the cup.

Dust cup clean

1. Press the release dust tank button, Take it out.
2. disassemble the dust cup, and get out the steel mesh and sponge net filter from the dust cup.
3. Both steel mesh and sponge net can be washed. After cleaning, dry them naturally
   Picture 10

Attention:
After long time use, the roll may stick hair or other masses which needs to be cleaned in time in order to keep the vacuum cleaner working efficiently.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.

LIMITED WARRANTY

Limited Warranty applies to purchases made from authorized retailers of TurboTronic®.

• TurboTronic® Warranty coverage applies to the original owner and to the original product only and is not transferable.
• TurboTronic® warrants that the unit shall be free from defects in material and workmanship. Limited Warranty applies only when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

ANY WARRANTY OR AFTER-PURCHASE SERVICE SHOULD BE WITH A THIRD-PARTY COMPANY, FROM WHICH YOU PURCHASED THE PRODUCT. TURBOTRONIC® PROVIDES THE WARRANTY ONLY TO OUR THIRD-PARTY SUPPLIERS. SINCE THIS PRODUCT IS NOT PURCHASED DIRECTLY FROM TURBOTRONIC® BUT THROUGH ONE OF OUR THIRD-PARTY SUPPLIERS, ANY ISSUE AFTER THE PURCHASE, CUSTOMER SERVICE OR RECEIVING THE WARRANTY SHOULD BE ONLY / DIRECTLY THROUGH THE THIRD-PARTY SUPPLIERS FROM WHICH YOU PURCHASED THE PRODUCT.

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in TurboTronic® sole discretion, will be repaired or replaced.
2. TurboTronic® reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by TurboTronic®. These defects include damages caused in the process of shipping, altering, or repairing the TurboTronic® product (or any of its parts) when the repair is performed by a repair person not authorized by TurboTronic®.
6. Products purchased, used, or operated outside Europe.

Illustrations may differ from actual products.
We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

TurboTronic® and Z-Line® are registered trademarks of Z-GLOBAL B.V.B.A ®.

PRINTED IN PRC.

www.zline-world.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>