VEVOR Fr-900 Muti Purpose Membrane Sealing Machine Instruction Manual

VEVOR Fr-900 Muti Purpose Membrane Sealing Machine

PURPoSE OF THE PRODUCT

The machine is suitable for sealing and bag-making of various plastic and compound films it is a best sealing equipment to be widely used in such sectors such as food, pharmaceutical, chemical industry, daily cosmetics, native and special local products, vegetable seeds, electronic components etc.,

PERFORMANCE AND CHARACTERISTICS

With the electronic thermostatical control and the auto-trans- portation device, the machine can make various shapes of plastic film bags and be used for setting of various packing lines without Limiting the sealing length; having the characteristics of high efficiency of continuous sealing, reliable quality, reasonable the horizontal type is for packing and sealing of drying goods; the vertical one is used for liquid goods.

CONSTRUCTION AND WORKING PRINCIPLE

The machine consists of frame, speed regulator,sealing length regulator, temperature control, drive and transportation devices. When it turns on,the electro-thermal component produces quantity of heat to make the temperature ofboth upper and lower heaters promptly raise And be adjusted the temperature and necessary speed for the sealing material by the temperature control meter and the speed regulator, The plastic packing bag is transmitted by the conveyer belt with its sealing part senting into the two running sealing braids, and then is subjected to the exrtusion of the two heaters in heating area to make the plastic film conglutinate after being heated, then the bag is cooled in cooling area, its sealing part, rolled by the pattern roller or the inker wheel, is made out with stripes or netted veins or the necessary words. The drive parts consisting of sealing braids, lead belt and conveyer belt all are driven by a motor in synchronistical running.

MAIN SPECIFICATIONS

• Power supply : 220+10v, 50 HZ
• Power 500W
• Sealing speed : 0—- 12M/min (adjustable)
• Sealing width : 612min (adjustable)
• Temp. range : 0—– 300 c (adjustable)
• Sealing length: Unlimited
• No. of printing words: 13
• Exterior dimensions: Horizontal type: 850X420X320(mm)
• Vertical type: 850X320X550 (mm)
• Console type : 850X420X1000(mm)

ELECTRICAL SCHEMATIC DRAWING AND TABLE

DETAIL TABLE

 WAY TO USE

Legend and description of the machine:

1. Conveyer belt
2.  Rubber wheel
3. Pattern roller (inker wheel)
4. Tnker wheel seat
5.  Pressure regulating wheel
6.  Driving wheel
7. Safety guard
8. Cooling block
9.  Heating block
10.  Sealing braid
11.  Control box
12.  Driven wheel
13.  Guide place of sealing width regulation
14.  Power socket and safeguard
15. Fixed working table
16. Regulation screw of conveyer belt’s elasticity
17.  Regulation knob of conveyer station’s in-out
18.  Regulation knob of conveyer station’s height
19.  Nameplate
20. Conveyer station

Fig. 3 Assembly drawing of the horizontal and vertical dual type machine in vertical

1. Horizontal beam (vertical type)
2. Tripod (vertical type)
3. Conveyar station
4.  Vertical long axis
5.  Control box
6. Power supply socket
7.  Height regulation knob
8.  Conveyer station’s support
9. Fixing knob of conveyer station
10. Umbrella gear seat
11. Pressurs regulating knob
12.  Insurance tube
13.  Support (horizontal type)
14.  Fixed working table

Names of the control box:

Preparation prior to start the machine:

1. The machine is equipped with a shell-grounded triplex socket, which should be well grounded to make sure of safe production.
2.  The Electro-thermal component should be preheated with low temperature for a few of minutes before normal operation because it may be wet in initial use or after long interval unused.
3.  Adjust the height and the front-and-back position of the conveyer station to fit the necessary level of the sealing bag’s exterior size.
4.  Adjust the position of the guide place of sealing width regulation according to its requirement.
5. Adjust the spaces between the upper and lower heaters and the upper and lower coolers (i. e. the spaces between the resealingg braids)according to the necessary thickness of sealing material.

 Operation

1. Turn on the power, the indicator lights then all wheels begin their synchronistical running.
2.  Adjust the knob of pattern roller to have it (or inker wheel) rotated and regulated to suitable pressure.
3.  Turn on the heating switch, the green lamp of the electronic temperature control meter lights, adjust the meter to necessary temperature according to the nature and the thickness of the packing bag’s material. In general, the numerals below can be used for above adjustment at a room temperature of 20 C:
4.  Polyethylene: 150– 160C
5. Polypropylene: 170– 180C
6. Polyolefine compound: 180– 190 C The flexibility of temperature adjustment can be increased along With the adjustable speed. The red lamp lights after heating for a while indicating the required temperature is enough, then a trial of sealing can be done with a preset packing bag to determine the temperature, The speed and the pressure of the pattern roller(inker wheel)need to be adjusted upon the sealing result to get an ideal sealing quality, and after that ,continuous sealing can be processed.
7. Determine if the blower needs turning on for cooling according to the thickness of the sealing material.(It should be turned on for common polyethylene etc.single layer plastic films).
8. The sealing part of the bag should be aligned flatly laid .Push the regulation place for the sealing sides in and at the moment, when the part is gripped bythe sealing braids and self-moving for wards, neither pushing or stopping nor putting-in or pulling-out wit force can be done; otherwise uneven sealing or faults may result.

WAY TO CHANGE THE HORIZONTAL TYPE INTO THE VERTICAL ONE

1. Install two tripods and two horizontal beams with M4 screws, the concave of the tripod faces inward while that of the beam faces downward.
2.  Loose the regulation knob of conveyer station’s in-out and pull the station out, then take out the knob and the square fixing screws to take out the station.
3.  Mount the station onto the vertical tripod and tighten the fixing knob.
4. Take out the horizontal short axis and install the horizontal long axis and the umbrella gear seat.
5.  Put the long axis into the axial hole on the machine and the horizontal support into the vertical support, install and tighten the height regulation knob.
6.  Vertically place the sealing machine for vertical sealing.

WAY To MAINTAIN AND REPAIR

1.  Way to maintain

2.  Push the driven wheel toward B and take out the sealing braid.

3. Change with a new braid and install the upper and lower lead belt.

4.  Place the driven wheel and the heater and the cooler in their original positions.

5.  Turn on the power to make the pulley rotated and the braid driven to move, then start a trial. The edge-deviation, if any, on the sealing braid can be adjusted through the screw on the driven wheel.

6.  Install the safety guard, then continuous operation can be done after heating.

7.  In order to prolong the duration of the sealing braid, prior to

8.  In order to prolong the duration of the sealing braid, prior to stop the machine, return the rotating disk of temperature adjustment to zero place and turn on the blower, at the moment, the temperature pointer begins slow falling down but sealing braid is still running. It cannot be done to turn off the blower, the master power switch etc. until the temperature becomes under 100C in minutes.

9. Turbo case:
   As an overall sealed turbo and worm unit, the turbo case has the features of low noise, lerge power etc., oiled with 50g 20#oilonly once month and cleaned and maintained only once a year calculated per 8 hours a shift in general when in use. Cares should be taken to keep cleaned inside of the case when maintaining to avoid appearing noise.

10. Way to repair

Bill OF PACKAGE OFFR-900 SEALING MACHINE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>