SILVA 38288 Trail Runner Free 2 Hybrid User Manual
- June 13, 2024
- SILVA
Table of Contents
SILVA 38288 Trail Runner Free 2 Hybrid
Product Information
- Product Name : Trail Runner Free 2 Hybrid
- Art. No: 38288
Intelligent Light :
The Trail Runner Free 2 is equipped with Intelligent Light, a light
distribution technology that combines a wide-angle floodlight with a long-
reach spotlight. This unique light distribution, customized for running,
provides peripheral and long-distance vision simultaneously, reducing head
movement and improving control, balance, and speed.
Product Overview :
The Trail Runner Free 2 Hybrid packaging includes the following parts:
- Headlamp body
- Elastic headband with anti-slip silicone
- Hybrid battery case
- Hybrid battery (included)
- Textile extension cord
Product Usage Instructions
Before Use:
- Adjust the Headband: Move the 2 sliding buckles on each side of the headband to fit comfortably on your head. The anti-slip silicone on the inside ensures it stays in place while running.
- Battery Charging: Charge the battery by either keeping it inside the Hybrid battery case or taking it out. Follow these steps:
- Locate the USB-C connector on the front of the Hybrid battery pack.
- Attach the included USB charge cable to the USB-C connector.
- Connect the USB connection to a wall outlet, computer, or other standard USB connection.
- The charge time is approximately 2.5 hours.
- Note: Never leave a battery unattended while charging.
- Insert the Batteries: Open the hybrid battery case and insert the Hybrid battery (included). You can also use three AAA batteries (Alkaline, NiMH, or Lithium) in the Hybrid battery case. Ensure correct battery polarity. If not using the headlamp for an extended period, remove the batteries from the case before storing.
- Connection to Headband: Connect the Hybrid battery case to the buckle on the left side of the headband. Use the textile extension cord if you want to carry the battery case in your backpack or pocket.
During Use:
- Switch On Your Headlamp: On the side of the headlamp body, there is a push button that controls all light modes.
- Press once to turn on the headlamp in minimum brightness mode.
- Press again to switch to medium brightness mode.
- Press again to switch to maximum brightness mode.
- Pressing the button starts the cycle over from minimum brightness mode.
- To turn off the headlamp, press and hold the button for more than 1 second.
- Min Mode Indication: The Trail Runner Free 2 has a visual indication when toggling from maximum brightness mode to minimum brightness mode. It flashes quickly to prevent unnecessary button presses.
- Rear Safety Light: The Hybrid battery case includes a built-in rear red light for extra visibility and safety. Open the case and slide the switch inside (located on the lower left side) to choose between flashing red or solid red light.
INTELLIGENT LIGHT
Trail Runner Free 2 is equipped with Intelligent Light, which is a light
distribution technology that combines a wide-angle flood light with a long
reach spotlight. This unique light distribu- tion, customized for running,
gives the user peripheral and long-distance vision at the same time. For a
runner – this results in less head movement, increased control, better balance
and more speed.
PRODUCT OVERVIEW
The Trail Runner Free 2 Hybrid packaging consists of the following parts:
- Headlamp unit
- Free Technology™ headband
- Hybrid battery case with built in visibility light
- Textile extension cord
- Rechargeable Hybrid battery (1.25 Ah/ 6Wh)
- USB-C charge cable
- Quick guide
BEFORE USE
ADJUST THE HEADBAND
The elastic headband with anti-slip silicone on the inside is designed to
give a comfortable fit and to stay in place at speed activities such as
running. Adjust the headband by moving the 2 sliding buckles on each side to
fit comfortably on your head.
**BATTERY CHARGING
**
You can charge the battery either by keeping it inside the Hybrid battery case or taking it out of the Hybrid battery case.
- A USB-C connector is located on the front of the Hybrid battery pack. Attach the included USB charge cable to this USB-C
- Connect the USB connection to a wall outlet, computer or other standard USB connec- tion.
- Next to the USB-C connector is a charge indication LED, showing the charging status:
- Red light = battery is charging
- Green light = battery is fully charged Charge time is approximately 2.5
Note! When battery is fully charged the battery automatically switches to maintenance charge. However, never leave a battery unattended while charging.
INSERT THE BATTERIES
- Open the hybrid battery case and insert the Hybrid battery (included).
- As an option, you can use three AAA batteries in the Hybrid battery case. Either Alkaline, NiMH or Lithium batteries can be used. Please note the battery polarity.
- Do not mix different brands of batteries. Do not mix batteries with different levels of dis- charge. If you don’t intend to use the headlamp for a longer period, make sure you remove the batteries from the battery case before storing.
CONNECTION TO HEADBAND
Connect the Hybrid battery case to the buckle on the headband located on
the left side. Included is also a textile extension cord that can be connected
in between the headband buckle and the battery case if you want to carry your
Hybrid battery case in a your backpack, pocket or similar.
DURING USE
SWITCH ON YOUR HEADLAMP
On the side of the headlamp body there is a push button which controls all
light modes.
Each press on the button gives you the following light:
- Turns the headlamp ON in minimum brightness mode
- Switches to medium brightness mode
- Switches to maximum brightness mode
- Starts over from 1
To turn OFF; press and hold the button for more than 1 second. MIN MODE INDICATION:
Trail Runner Free 2 is equipped with a visual indication when you toggle from maximum brightness mode to minimum brightness mode. This is visible with a quick flash and is helpful to prevent unnecessary button presses.
REAR SAFETY LIGHT
Built into the Hybrid battery case is a rear red light for extra visibility
and safety. To turn this light ON, open the Hybrid battery case and slide the
switch (located on the lower left side inside the case) to desired position
(flashing red or red).
BATTERY STATUS INDICATION
When the headlamp is turned OFF a small LED is visible through the front
lens of the head- lamp to indicate the status of the batteries. This
indication will be on for 5 seconds.
- Green: Battery in good condition
- Red: Battery in poor condition
AFTER USE MAINTENANCE
To make sure you get maximum performance from your headlamp, clean the lamp unit regu- larly with a damp cloth.
ABOUT LI-ION (LI-PO) BATTERIES
- The battery should be stored in a dry environment within the temperature range of -20°C – +35°C.
- If you would like to store and not use your battery for a longer period (more than 30 days) the battery should be 50%charged.
- Li-Ion batteries have a discharge rate of approx. 20% over a 30 day period (if fully charged and stored in +25°C).
- Do not expose the battery for extreme temperatures which may cause fire or explosion. Do not disassemble or mistreat the battery due to risk for chemical burn.
- Keep away from children.
- Do not submerge the batteries in water. Do not short circuit the contacts.
- Replace only with Silva battery.
Note! Always make sure to disconnect the battery when the headlamp is not used.
TECHNICAL SPECIFICATIONS
- Battery type included: 1 x LiPo 1.25 Ah 3.7 V 4.6 Wh
- Water resistance: IPX5
- Operative temperature range: -20ºC – +60ºC
- Weight: (headlamp including headband): 60 grams
- Charging time: 2 h 30 min
With Hybrid battery:
- Weight (battery case + Hybrid battery): 53 grams
- Light distance (Max/Med/Min): 80 m/50 m/27 m
- Lumen (Max/Med/Min): 500/200/50 lm
- Burn time*(Max/Med/Min): 1.5-3 h/4.5-8 h/7.5-12.5 h
With AAA batteries:
- Weight (battery case + 3 x AAA batteries): 62 grams
- Light distance (Max/Med/Min): 75 m/50 m/27 m
- Lumen (Max/Med/Min): 450/200/50 lm
- Burn time* (Max/Med/Min: 1.5-2 h/4-5 h/15.5-18.5 h
Values are measured and specified according to theANSI FL1 STANDARD Lumen and burn time values are measured for normal usage.
*The burn time is affected by speed (airflow) and the ambient air temperature and may vary in different conditions.The burn time is therefor presented as a span between the lowest and highest value achieved in different conditions. For more information on how different factors affect the burn time and light output; have a look at our headlamp guide at: www.silvasweden.com
PROTECT THE ENVIRONMENT
Headlamp and battery should be recycled and must not be thrown in the
regular trash. Dis- pose these items in accordance with applicable local
regulations.
**WARRANTY
**
Silva warrants that, for a period of two (2) years, your Silva product will be substantially free of defects in materials and workmanship under normal use. Silva’s liability under this war- ranty is limited to repairing or replacing the product. This limited warranty extends only to the original purchaser.
If the Product proves defective during the warranty period please contact the original point of purchase. Make sure to have your proof of purchase on hand when returning the product. Returns cannot be processed without the original proof of purchase. This warranty does not apply if the product has been altered, not been installed, operated, repaired, or maintained in accordance with instructions supplied by Silva, or has been subjected to abnormal physical or electrical stress, misuse, negligence or accident. Neither does the warranty cover normal wear and tear. Silva is not responsible for any consequences, direct or indirect, or damage resultant from use of this product. In no event will Silva’s liability exceed the amount paid by you for the product. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is valid and may be processed only in the country of purchase.
For more information please visit www.silvasweden.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>