SILVA MR400 RC Work Light User Manual
- October 30, 2023
- SILVA
Table of Contents
SILVA MR400 RC Work Light User Manual
PRODUCT OVERVIEW
The packaging consists of the following parts:
- Headlamp unit
- Head band
- USB charge cable (MR400 RC)
- 3xAAA batteries (MR400)
- Helmet bracket including 3M adhesive
- Quick guide
BEFORE USE
CHARGING THE LI-ION BATTERY (MR400 RC)
Before first use the battery must be charged. Open the lid on the right-hand
side of the headlamp by turning the lid counter clock wise.
Connect the charge cable and the red indicator LED will light up. When the
light is turns green, the battery is fully charged.
Disconnect the charge cable.
Note: Make sure to close the lid when the charging is finished to assure water protection.
INSERT BATTERIES (MR400)
Open the lid on the right-hand side of the headlamp by turning the lid counter
clock wise.
Note polarity markings inside the headlamp body and insert the batteries.
Note:
- Make sure to close the lid when the batteries are inserted to assure water protection.
- Do not mix brands of batteries
- Do not mix new and old batteries
ADJUST THE HEADBAND
The elastic headband with anti-slip rubber on the inside is designed to give a
comfortable fit at all times.
Adjust the headband by moving the sliding buckle to fit it onto your head.
HELMET MOUNT
The included clip is used ether as a helmet attachment or a clip for example
your belt or straps etc.
Mount the clip to your helmet using the included double adhesive tape.
To mount the headlamp to the clip you simply push the headlamp into the clip.
To release the headlamp form the clip you push on the release area and at the
same time pull the headlamp out of the clip.
DURING USE
SWITCH ON YOUR HEADLAMP
On the left-hand side of the headlamp body there is a push button which
controls all light modes.
BATTERY STATUS INDICATION
When the headlamp is turned OFF, a small LED is turned on inside the front of
the head lamp to indicate the status of the batteries.
This indication will be on for 3 seconds.
MR400 RC:
- Green light – Battery in good – medium condition
- Red light – Battery needs charging
MR400:
- Green light – Battery in good condition
- Orange light – Battery in medium condition
- Red light – Battery needs to be replaced
AFTER USE
MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it
regularly with a damp cloth.
Headset cleaning – wash in washing machine at 40ºC.
RECHARGEABLE BATTERY PRECAUTIONS (MR400 RC)
-
MR400 RC has an internal Li-ion battery and should be stored in a dry environment within the temperature range of -20ºC to +35 ºC.
-
If you would like to store your lamp for longer periods (more than 30 days) the battery should be 50% charged. Recharge at least every 6 months.
-
Do not expose the lamp with battery to extreme temperatures which may cause fire or explosion.
-
Do not disassemble or mistreat the battery, risk for chemical burn.
-
Recharge only with a USB cable.
The charger’s output voltage must not exceed 5 5V.
Use only a CE/UL approved charger, computer or portable power supply. -
Never leave the lamp unattended while charging.
TECHNICAL SPECIFICATIONS
MR400 RC:
- Headlamp weight: 73g
- Battery type: Li-Po, 700mAh, 3.7V
- Charging time: 2.5h
- Water resistance: IPX7
- Operative temperature range: -20ºC – +60ºC
- Storage temperature: -20ºC – +35 ºC
MR400:
- Headlamp weight incl batteries: 88g
- Battery type: 3xAAA alkaline
- Water resistance: IPX7
- Operative temperature range: -20ºC – +60ºC
- Storage temperature: -20ºC – +35 ºC
PROTECT THE ENVIRONMENT.
Headlamp and batteries should be recycled and must not be thrown in the
regular trash.
Dispose these items in accordance with applicable local regulations.
WARRANTY
Silva warrants that, for a period of two (2) years*, your Silva product will
be substantially free of defects in materials and workmanship under normal
use.
Silva’s liability under this warranty is limited to repairing or replacing the
product.
This limited warranty extends only to the original purchaser.
If the Product proves defective during the warranty period please contact the
original point of purchase.
Make sure to have your proof of purchase on hand when returning the product.
Returns cannot be processed without the original proof of purchase.
This warranty does not apply if the product has been altered, not been
installed, operated, repaired, or maintained in accordance with instructions
supplied by Silva, or has been subjected to abnormal physical or electrical
stress, misuse, negligence or accident.
Neither does the warranty cover normal wear and tear. Silva is not responsible
for any consequences, direct or indirect, or damage resultant from use of this
product. In no event will Silva’s liability exceed the amount paid by you for
the product.
Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
This warranty is valid and may be processed only in the country of purchase.
Batteries: one (1) year
CUSTOMER SUPPORT
For more information please visit: www.silvasweden.com
