CENTEK CT-1470 Contact Grill Instruction Manual

: June 9, 2024
: CENTEK

Table of Contents

CENTEK CT-1470 Contact Grill
Product Information
Usage Instructions
SECURITY MEASURES
DESCRIPTION OF THE DEVICE
COMPLETENESS
CARE OF THE DEVICE
TECHNICAL SPECIFICATION
GUARANTEE MAINTENANCE TERMS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CENTEK CT-1470 Contact Grill

Product Information

CT-1470 CONTACT GRILL

The CT-1470 CONTACT GRILL is a kitchen appliance used for grilling food items. It comes with a user manual to guide the users on how to operate the grill safely and efficiently. The grill has LED indicators, a hinged fastening system, and non-stick work surfaces that make it easy to use and clean. It has a voltage of 220-240 V ~50/60 Hz, a nominal power rating of 1700-2000 W, and a plate size of 290×230 mm.

Usage Instructions

Before using the grill, read the instruction manual carefully.
Connect the grill to a power source with a voltage of 220-240 V ~50/60 Hz.
When indicator (4) lights up, the grill is ready for use.
Open the grill lid with the handle (9) and place the food items on the lower roasting surface.
Close the lid to start cooking. The hinged fastening system ensures that the upper lid evenly presses down on the food items regardless of their size or shape.
If you notice that the food items have started to burn, reduce the temperature or add more oil to the work surfaces.
It is forbidden to remove cooked foods using sharp metal objects that can damage the non-stick coating of work surfaces. Always use plastic or wooden accessories designed for non-stick cookware.
The recommended thickness of the steak is at least 4 cm. The pre-thawed steak must be removed from the refrigerator at least an hour before the start of roasting so that it takes the ambient temperature.
After use, turn off the grill and unplug it from the power source.
Clean the grill with a soft damp cloth and mild detergent. Do not immerse the grill in water or use abrasive cleaners.

Dear consumer!
Thank you for choosing CENTEK TM products. We guarantee the perfect functioning of this product in compliance with the rules of its operation.

Please read these instructions carefully before starting operation. The manufacturer is not responsible if the device is not used for its intended purpose and in case of non-compliance with the rules and conditions specified in this manual, as well as in case of attempts of unskilled repair of the device. If you wish to transfer the device to another person for use, please transfer it together with this instruction.

This device is intended for use in domestic and similar conditions, in particular

in kitchen areas for staff in shops, offices and other industrial conditions;
on agricultural farms;
clients in hotels, motels and other residential infrastructure;
in private boarding houses.

SECURITY MEASURES

The device you purchased complies with all official safety standards applicable to electrical appliances in the Russian Federation. In order to avoid situations that are dangerous to life and health, as well as premature failure of the device, it is necessary to strictly observe the following conditions:

Before connecting to the mains, make sure that the operating voltage of the device corresponds to the voltage in the electrical network.
To avoid the risk of fire, do not use adapters when connecting the appliance to an electrical outlet.
Do not use the appliance outdoors.
Never leave the appliance running unattended.
Place the appliance on a flat, stable, heat-resistant surface so that access to the electrical outlet is free.
Use the appliance in places with good ventilation. In order to avoid fire, do not place the appliance near curtains or curtains and do not cover it during operation.
Beware of steam escaping from the gaps between the working forms, be careful, in order to avoid burns, do not bring your hands and do not place other open areas of the body close to the edges of the working forms.
The surface of the heating element remains hot after the device is shut down.
Never remove products from the appliance with sharp objects, as they may damage the non-stick coating of the working molds.
The device is not designed to operate from an external timer or a separate remote control system.
Do not move the appliance until it has completely cooled down.
Disconnect the appliance from the mains every time before cleaning, and also if you do not use it.
Do not allow the power cord to hang from the table, as well as its contact with hot surfaces or sharp edges of kitchen furniture.
When disconnecting the plug of the power cord from the electrical outlet, do not pull the cord, but hold on to the plug with your hand.
Do not touch the plug of the power cord with wet hands.
Do not use the appliance in the immediate vicinity of the kitchen sink, do not expose it to moisture.
If the power cord or any other part of the device is damaged, immediately disconnect the device from the electrical network and contact the manufacturer’s service center.
In case of unskilled interference with the device or non-compliance with the rules of operation of the device listed in this manual, the warranty is canceled.
Special conditions for transportation (transportation), sale: no.
The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities or lack of life experience or knowledge unless they are supervised or instructed to use the device by a person responsible for their safety. Children should be supervised to prevent playing with the appliance.
Do not allow children to play with plastic bags or packaging film. The danger of suffocation!
It is forbidden to use the device if the mains plug or electrical cord is damaged if it works intermittently, as well as after it falls. Do not attempt to repair the appliance yourself.
For all repair questions, please contact an authorized (authorized) service center.
Use the appliance only with the proper connector.

DESCRIPTION OF THE DEVICE

CENTEK-CT-1470-Contact-Grill-fig-1

Frying plates with non-stick coating
LED indicator for turning on the grill in the network
Power control
LED-heating indicator
Timer
A ledge with a beveled surface
Stopper for fixing the bracket in the open position
Stop for adjusting the distance between the plates/lock-lock
Handle

COMPLETENESS

Grill – 1 pc.
Oil collection tray – 1 pc.
Replacement plate – 4 pcs.
Instruction manual – 1 pc.

WORKING PROCEDURE

PREPARATION FOR WORK
Note: Before using the device for the first time, make a test start by setting the maximum temperature. When using the device for the first time, the heating elements burn, and a small amount of smoke or foreign odor may appear. This is acceptable and is not a defect.

Place the device on a flat, stable surface.
Make sure that the oil collection tray is installed.
Close the grill lid and connect it to the mains.
The «Network» indicator will light up and the plates will start heating.
Use the power control (3) to set the power required for operation – the temperature of the frying surface.
It will take 3 to 5 minutes to reach the set temperature.
As soon as the appliance reaches the set temperature, the «Heating» indicator (4) lights up, you can start cooking.
Open the grill lid with the handle (9) and place the products on the lower roasting surface. Close the lid. Thanks to the hinged fastening, the upper lid evenly presses down the products regardless of their thickness. You can also close the top cover without pressing the products. To do this, set the stop (8) in the desired position on the ledge (6).
The cooking time depends on individual preferences.
After the food is cooked, grasp the handle (9) and lift the upper work surface.
Transfer the cooked foods to suitable dishes using wooden or heat-resistant plastic kitchen accessories.
After you finish working with the grill, turn it off by setting the power control knob to the «Off» position, and remove the plug of the power cord from the outlet.
Wait for the work surfaces to cool completely. Remove the remaining vegetable oil from the work surfaces with a paper napkin.

OPEN FRYING SURFACE
Grasp the handle and open the grill about 900 degrees. While holding the upper work surface by the handle, press the stopper (7) and sink it into the device body. Open the grill to the end. In this position, you can use both plates to cook dishes (for example, fry fried eggs or reheat pizza).

ATTENTION! Do not touch the appliance body with unprotected hands during cooking. Wear heat-resistant kitchen mittens.

RECOMMENDATIONS

Do not use the grill for defrosting and cooking frozen foods.
Do not cook pieces of meat on large bones.
The duration of cooking depends on the products used. Before eating, make sure that the products are completely fried.
If you notice that the products have started to burn, reduce the
temperature or add more oil to the work surfaces.
It is forbidden to remove cooked foods using sharp metal objects that can damage the non-stick coating of work surfaces. Always use plastic or wooden accessories designed for non-stick cookware.
The recommended thickness of the steak is at least 4 cm. The thawed steak must be removed from the refrigerator at least an hour before the start of roasting so that it takes the ambient temperature

CARE OF THE DEVICE

Clean the grill after each use. With regular cleaning of the appliance, the non-stick coating of the plates will last a long time.
Unplug the appliance and unplug the power cord from the wall outlet.
Fully open the work surfaces and allow the appliance to cool down to room temperature.
Remove the remaining products with a scraper, wipe the work surfaces with a damp cloth, then dry thoroughly.
Pull out the oil collection tray, drain the fat, rinse the tray with warm water with a neutral detergent, then dry it thoroughly.
Wipe the grill body with a soft, slightly damp cloth.
Do not use abrasive detergents, solvents or metal washcloths to clean the work surfaces and the outer surface of the grill, as they can damage the non-stick or outer surface of the grill.
Never immerse the appliance, the power cord and the plug of the power cord in the water!
Be sure to clean the appliance before putting it away for storage.
Wind up the power cord.
Keep the appliance in a cool, dry place out of the reach of children.

TECHNICAL SPECIFICATION

Voltage: 220-240 V ~50/60 Hz
Nominal power rating: 1700-2000 W
Plate size: 290×230 mm

ATTENTION! Be careful: while operating appliance surface can be high.

ENVIRONMENTAL PROTECTION, DISPOSAL OF THE DEVICE

ENVIRONMENTAL PROTECTION The packaging and the device itself are made of materials that can be reused. If possible, when disposing of them, dispose of them in a container intended for reusable materials.

DISPOSAL OF THE DEVICE
The device can be disposed of separately from ordinary household garbage at the end of its service life. It can be handed over to a special reception point for electronic devices and electrical appliances for recycling. Materials are processed in accordance with their classification. By handing over this device at the end of its service life for recycling, you will make a great contribution to environmental protection. You can get a list of points of reception of electronic devices and electrical appliances for recycling from municipal public authorities.

CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years from the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon the expiry of the service life please contact the nearest authorized service center for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). Guarantee and post-guarantee maintenance is provided by the General Service Center OOO «Larina-Servis» (Russia, Krasnodar), phone: +7 (861) 991-05-42. The address of the facility authorized with receiving buyer claims, maintenance and repairs is shown on the website https://centek.ru/servis, otherwise refer to the store or other legal entity, where you have purchased this appliance. The product has the Certificate of Conformity No.: № ЕАЭС RU С-CN.ВЕ02.В.02553/20 from 06.08.2020 y.

INFORMATION ABOUT THE MANUFACTURER, IMPORTER
I moved to EAEU by: Individuality Predprinimatel Asrumyan Karo Shurikovich. Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy, phone: +7 (861) 2-600-900.

DEAR CONSUMER!
The guarantee period for all appliances amounts to 12 months from the date of sale to the end consumer. With this Warranty Card the manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

The guarantee shall be valid if the following documentation conditions are observed:
- The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
  The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.
The guarantee shall be valid if the following operating conditions are observed:
- the appliance is used in strict accordance with the present manual;
- the safety rules and requirements are observed.
The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
The guarantee does not apply in the following cases:
- mechanical damage;
- normal wear of the appliance;
- non-observance of operation requirements or erroneous actions on the part of the user;
- improper installation or transportation;
- natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
- ingress of foreign objects, liquids or insects into the inside of the appliance;
- repairs or modifications to the appliance by unauthorized persons;
- use of the appliance for commercial purposes (loads exceeding normal domestic application), the connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
- failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
- remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers; b. consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
- for battery-powered appliances – operation with inappropriate or depleted batteries;
- for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).