SEAR PRO 365511 Multi Use Torch User Guide
- June 13, 2024
- SEAR PRO
Table of Contents
FIRE/EXPLOSION HAZARD A CARBON MONOXIDE HAZARD
DANGER: EXTREMELY FLAMMABLE GAS. CARBON MONOXIDE CAN CAUSE DEATH.
WARNING: THIS PRODUCT EXPELS FLAMMABLE GAS. KEEP OUT OF REACH OF CHILDREN
AT ALL TIMES.
NEVER ALTER THE TORCH IN ANY WAY. USER ASSUMES ALL RISK.
NOTE; IMPROPER USE OF THIS PRODUCT MAY CAUSE BODILY HARM AND/OR DEATH.
BEFORE USE
- Read all warning labels, guidelines & instructions on propane bottle before attaching to the torch.
- Turn off torch (clockwise to tighten & counterclockwise to loosen).
- Attach torch to the propane cylinder using hand-tighten method only and ensure proper sealing.
- Slightly loosen red fuel valve on top & push igniter until torch lights. (Use very little fuel)
- Adjust red fuel valve to control the amount of flame needed.
- Always monitor your torch & never use in excess as the item could overheat & cause damage.
- Ambient air temperature could affect the burn time on the torch & must be monitored.
- Never leave the torch unattended or use in a confined area.
- Never use indoors and always have a fire extinguisher nearby.
AFTER USE
- Ensure pilot light is out & unit is fully shut off.
- Let the torch cool down after use before storing.
- Never leave the torch attached to the propane tank.
- Never store the unit outside or leave in the elements.
- Inspect the torch before& after every use.
Please see instructions below:
CAUTION:
BURN TIME: NEVER BURN MORE THAN 1 MINUTE AT ANY ONE TIME TO AVOID
DAMAGING YOUR UNIT.
LIGHTING: SLIGHTLY TURN RED KNOB COUNTERCLOCKWISE, THEN CLICK THE IGNITER
1-2 TIMES. IF IGNITION DOES NOT HAPPEN, SLOWLY DECREASE FUEL AND RETRY UNTIL
IGNITION OCCURS. RESTART PROCESS IF ATTEMPTS FAIL.
NOTE: VERY LITTLE FUEL IS NEEDED TO LIGHT THE TORCH. WINDY CONDITIONS
MAKE TORCH LIGHTING DIFFICULT .
WARNING: TIP OVER HAZARD
SEARPRO.ORG
SEARPROLLC@GMAIL.COM
@SEARPRO
@SEARPRO
@SEARPRO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>