beyerdynamic M 130 Double Ribbon Microphone User Manual

: June 13, 2024
: beyerdynamic

beyerdynamic M 130 Double Ribbon Microphone

beyerdynamic M 130 Double Ribbon Microphone-product

Product Information

The M 130 is a dynamic double-ribbon microphone manufactured by beyerdynamic. It is part of the M series and is designed to provide high impulse fidelity and good transient response. The microphone features a figure-eight polar pattern, which offers excellent
suppression of lateral noise. It is handcrafted in Germany using high-quality materials.

Technical Specifications

Diaphragm	Pure aluminium
Case/finish	Brass
Connector	XLR, 3-pin, male

Product Usage Instructions

Installation:

The M 130 microphone comes with a 3-pin XLR connector. To connect it to a microphone input, use a suitable microphone cable. Ensure that the cables are laid carefully to avoid any tripping hazards or potential damage to the microphone.

Operation:

The M 130 has a frequency-independent figure-eight polar pattern. To achieve optimal sound capture, position the microphone vertically to the sound source. This ensures that the ribbons, which are in a vertical extension to the microphone shaft, are aligned correctly.

You have chosen the M 130 dynamic double-ribbon microphone from beyerdynamic.

Thank you for your confidence in our M series.
In this user manual you will find important information on the use of your product.
Please take sufficient time to read them.
ENJOY THE SOUND!
Your beyerdynamic Microphone Team

SAFETY INSTRUCTIONS

Read this user manual and the safety instructions carefully before using the product.
Do not use the product if it is damaged.
Lay cables in such a way that no one can trip over the cables and that the device cannot be damaged.
Repairs may only be carried out by authorised specialists. Never open the microphone yourself. For devices that have been opened by the customer the warranty will invalidate.
Do not expose the product to rain, snow,liquids or moisture.
Use the device only under the conditions specified in the technical specifications.
Only use accessories and spare parts approved by the manufacturer.
Reduce the volume on the connected playback devices to prevent hearing damage, acoustic feedback and damage to the loudspeakers.

Intended use

Do not use the product in any way other than as described in this product manual. beyerdynamic accepts no liability for improper use of the product or its accessories.

Liability

beyerdynamic GmbH & Co. KG accepts no liability for damage to the product or injury to persons due to careless, improper or incorrect use, that is not in accordance with the purpose stated by the manufacturer.

BOX CONTENTS

1 χ M 130 microphone
1 χ MA-CL 25 microphone clamp
Storage case
Individual measurement chart
“M Series Guide” info sheet
Technical specifications on the M series

FEATURES

Dynamic double-ribbon microphone
Figure-eight polar pattern
Excellent suppression of lateral noise
High impulse fidelity and good transient response
Handcrafted in Germany

APPLICATION

The M 130 is ideal for stereo, room and instrument recordings and brings a popular and special ribbon sound that is characterised by warmth and precision. Depending on positioning and spatial situation, the
M 130 can be used for studio recordings of drums, electric guitar amps, piano, acoustic guitars, orchestras, choirs or for all kinds of atmospheric recordings.
As a stereo microphone system, two M 130 can be used to create a Blumlein stereo system for an excellent sounding room recording. M/S recordings can be made together with a hypercardioid or supercardioid microphone such as the M 160 dynamic double-ribbon microphone or the MC 950 true condenser microphone.

TECHNICAL SPECIFICATIONS

Transducer type. Dynamic
Operating principle. Pressure gradient
Polar pattern. Figure-eight
Frequency response. 40 – 18,000 Hz
Rear attenuation at 1 kHz. > 30 dB at 90°
Sensitivity (0 dB = 1 V/Pa). 1.3 mV/Pa (= -57.5 dBV)
Nominal impedance . 200 Ω
Load impedance. ≥ 1000 Ω
Diaphragm. Pure aluminium
Case/finish. Brass
Connector . XLR, 3-pin, male
Dimensions:
- Length. 128 mm
- Shaft diameter. 23 mm
- Head diameter. 38.5 mm
Weight. 160 g

FREQUENCY RESPONSE & POLAR PATTERN

This polar pattern and frequency response curve correspond to a typical production sample for this microphone.

beyerdynamic M 130 Double Ribbon Microphone-fig1

INSTALLATION AND OPERATION

Connection

The M 130 is equipped with a 3-pin XLR connector.You can connect it to any microphone input using a suitable microphone cable.
Caution: Carelessly laid cables are a trip hazard.People can be injured and the microphone can be damaged.

Operation

The frequency-independent figure-eight polar pattern suppresses unwanted interference from the sides. Attenuation at 90° or 270° exceeds 30 dB. Therefore, position the microphone so that monitor speakers and other sources of interference radiate from the sides onto the microphone.
As the ribbons are in a vertical extension to the microphone shaft, the microphone should be positioned vertically to the sound source.
The M 130 is supplied with the MA-CL 25 microphone clamp for tripods with 3/8″ thread. For tripods with a 5/8″ thread, you can unscrew the threaded insert.
Caution: A tripod with an insecure stand can fall over and damage a microphone mounted on it. Make sure the tripod stands stable.

MAINTENANCE

Use a soft cloth moistened with water to clean the microphone shaft and grille.
Make sure that no water enters the microphone. ? Do not use cleaning agents containing solvents.

DISPOSAL

This symbol on the product, in the operating instructions or on the packaging means that electrical and electronic devices must be disposed of separately from household waste at the end of their life cycle.
Always dispose of used equipment in accordance with applicable regulations.
Dealers for electronic equipment are generally obliged to take back waste electrical/electronic equipment free of charge. This obligation also applies to sales via remote communication.
For further information, please contact the local authorities or the dealer from whom the product was purchased.

TROUBLESHOOTING AND SERVICE

Should you have technical problems when using the microphone or should you need more instructions, please visit our FAQ website at https://support.beyerdynamic.com
In case of service, please contact authorised service personnel. Never open the microphone yourself, as this could invalidate all warranty claims. Please visit our website https://www.beyerdynamic.com for service and replacement parts.

FURTHER INFORMATION

If you need further information, please visit our website. On our product detail page https://www.be-yerdynamic.com/m-130.html you will also find sound samples.
If you would like to learn more about beyerdynamic microphones for various applications, please visit https://www.beyerdynamic.com/microphones-ma-de-in-germany

WARRANTY

beyerdynamic offers a limited warranty of 2 years on the purchased beyerdynamic product. The exact warranty conditions can be found on our website at https://www.beyerdynamic.com/service/warranty