Beyerdynamic 717959 Xelento Wireless 2nd Generation Instruction Manual
- June 4, 2024
- beyerdynamic
Table of Contents
Beyerdynamic 717959 Xelento Wireless 2nd Generation
SAFETY INSTRUCTIONS
- Please read these safety instructions carefully and completely before using the product.
- Please observe all instructions given, especially those concerning the safe use of the product.
- Please also observe the detailed operating instructions for this product. The instructions can be downloaded from the beyerdynamic website at www.beyerdynamic.de.
- Do not use the product if it is defective.
Intended use
Only use the product as described in this product manual. beyerdynamic accepts
no liability for damage to the product or injury to persons caused by
careless, improper or incorrect use of the product, or by use for purposes not
specified by the manufacturer. beyerdynamic is not liable for damage to USB
devices that do not comply with the USB specifications.
beyerdynamic is not liable for damage resulting from connection interruptions
due to batteries being empty or too old, or due to exceeding the Bluetooth®
transmission range.
Please also observe the relevant country-specific regulations before using the
product.
Adjusting the volume
High volumes and long listening times can permanently damage your hearing.
Because in-ear headphones sit directly in the ear canal, there is an increased
risk of hearing damage.
-
Before inserting the earphones, set the volume to minimum.
Only increase the volume after inserting the earphones. -
Do not use the in-ear headphones at high volume for a long time. When listening and speaking normally with in-ear headphones, your own voice should still be perceptible.
-
In case of tinnitus, decrease the volume. If necessary, consult a doctor.
-
We would like to point out that excessively high volumes and long listening times may cause hearing damage. Hearing impairments are irreversible, so always ensure an adequate volume level. It is advisable to keep listening times at high volumes as short as possible.
-
The headphones are not suitable for children under 12 years of age due to the possible high sound pressure level.
-
Do not use the headphones at full volume for more than three hours a week.
You can personalise your Bluetooth® headphones with the beyerdynamic MIY app. The app’s “Statistics” function records the sound pressure level your ears are exposed to over time. However, it only refers to the sound pressure level generated through the headphones’ speakers and not to that from external sources of noise.
Reducing perception of ambient noise
In-ear headphones drastically reduce perception of ambient noise. Using in-ear
headphones in road traffic can be potentially dangerous. The user’s hearing
must not be impaired to the extent that it causes road safety risks.
- Do not use the in-ear headphones within the action area of potentially dangerous machines and tools.
- Avoid using in-ear headphones in situations where hearing must not be impaired – particularly in road traffic, when crossing a level crossing or on a construction site.
Changed acoustic perception
For many people, wearing in-ear headphones takes some getting used to because
the acoustic perception of their own voice
and body as well as the inner ear sounds that occur while walking is different
from
the “normal” situation without in-ear headphones. However, this initially
strange sensation usually diminishes after wearing them for a while.
Cleaning dirty eartips
Dirt on the eartips and the formation of a warm and humid climate in the ear
canal can cause germs to multiply, which can increase the risk of an ear canal
infection.
- Regularly clean the eartips.
Damage from liquids
Liquid penetration can damage the earphones.
- Make sure that no liquids penetrate the earphones (e.g. when cleaning).Solvent-based or aggressive cleaning agents can damage the surfaces of the earphones or the cable.
- Do not use solvent-based or aggressive cleaning agents.
Risk of swallowing
- Keep small parts, such as product, packaging and accessories, away from children and pets. They constitute a choking hazard if swallowed!
Using the batteries
Danger from heat, water and mechanical stress
Excessive heat, water and mechanical stress may cause explosion, heat, fire,
smoke or fumes. Injuries and irreversible damage to the battery may result.
- Do not expose the battery to excessive heat, direct sunlight or fire. There is a risk of explosion, fire, smoke or gas.
- Do not subject the battery to mechanical stress (e.g. crushing). This may cause irreversible damage to the battery, or explosion or injury.
- Do not open the housing or remove the battery.
- Only use a USB 2.0/3.0 standard-compliant 5 V power supply to charge the battery via the integrated USB Type-C port.
Storing the battery
- If the battery is not going to be used for an extended period, set the charge level to approximately 50 % of the maximum capacity and store it at temperatures up to max. 30 °C.
Charging
Disconnect the Bluetooth® connecting cable from the charging unit once the
device is fully charged.
Environmental conditions
Do not expose the product to rain, snow, liquids or moisture.
Disposal
This symbol on the product, in the operating instructions or on the packaging means that the electrical and electronic devices must be disposed of separately from household waste at the end of their life cycle.
- Always dispose of used devices in accordance with the regulations in force.
- For further information, please contact your local authority or the dealer from whom the product was purchased.
Battery disposal
- Both disposable and rechargeable batteries must be disposed of separately from the product after use in accordance with the regulations in force. They must not be disposed of in household waste.
- Both disposable and rechargeable batteries must be discharged and removed before disposal.
IMPORTANT: Non-destructive removal of either disposable or rechargeable batteries by the end user is not possible with this product. Please contact beyerdynamic or consult independent specialists.
CONFORMITY AND GUARANTEE
EU DECLARATION OF CONFORMITY
beyerdynamic hereby declares that this radio transmission device complies with
the EU Directive 2014/53/EU and the EU Directive 2011/65/EU.
- The full text of the EU declaration of conformity can be found on the Internet at www.beyerdynamic.com/cod.
WARRANTY CONDITIONS
beyerdynamic provides a limited guarantee for the original beyerdynamic
product you have purchased.
- You can find detailed information about beyerdynamic’s warranty conditions on the Internet at www.beyerdynamic.de/service/garantie.
PRODUCT REGISTRATION
You can register your Xelento wireless online at
www.beyerdynamic.com by entering the serial
number.
TECHNICAL SPECIFICATIONS
- Bluetooth® frequency range: 2,400 – 2,483.5 MHz
- Transmitting power: 10 dBm
- Operating temperature range:-10 to +60 °C
- Charging temperature range: +10 to +45 °C
- Battery type: lithium-ion battery: 3.7 V, 125 mAh
You can find more detailed information about the technical data online at: www.beyerdynamic.com/Xelento-wireless.
REGISTERED TRADEMARKS
Use of the Made for Apple badge means that an accessory has been designed to
connect specifically to the Apple product(s) identified in the badge and has
been certified by
the developer to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and regulatory
standards. App Store is a service mark of Apple Inc.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX™ is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries. The
Bluetooth® word mark and logos are registered trademarks of Bluetooth® SIG,
Inc., and any use of such trademarks by beyerdynamic is under licence. Other
trademarks and trade names belong to their respective owners. USB Type-A, USB
Type-B and USB Type-C are trademarks of USB Implementers.
FCC / IC Regulation
FCC ID: OSDPIE21B
Canada IC: 3628C-PIE21B
NOTICE: This device complies with Part 15 of the FCC Rules [and with
Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the
following two conditions:
- this device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: Changes or modifications made to this equipment not expressly
approved by beyerdynamic may void the FCC authorization to operate this
equipment.
Radiofrequency radiation exposure information:
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines when used with the beyerdynamic accessories supplied or
designated for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
Made in Germany
This device should not be modified (otherwise the granted designation number
will become invalid.
beyerdynamic GmbH & Co. KG Theresienstr. 8
74072 Heilbronn / Germany Phone + 49 7131 617-300
E-Mail info@beyerdynamic.com
www.beyerdynamic.com
For further distributors worldwide, please go to
www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.
www.beyerdynamic.com
EN-DE-FR-ES-IT-SV-JA-ZH-AR 1
Safety, compliance and warranty
Xelento wireless (2nd generation) 693685 • (04.22)
References
- Garantie
- Headphones & Microphones |beyerdynamic
- Downloads
- XELENTO wireless: Audiophile in-ear headphones | beyerdynamic
- Kopfhörer & Mikrofone direkt vom Hersteller | beyerdynamic
- Garantie
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>