CIMARRON MX Series Boom Assemblies Owner’s Manual
- June 13, 2024
- Cimarron
Table of Contents
CIMARRON MX Series Boom Assemblies
Product Information
- Product Name: MX Series Boom Assemblies
- Models: MX408-QJD (5303666), MX410-QJD (5303667), MX412-QJD (5303668), MX517-QJD (5282865)
- Weight:
- MX408-QJD: 45 Lbs.
- MX410-QJD: 50 Lbs.
- MX412-QJD: 55 Lbs.
- MX517-QJD: 95 Lbs.
Important Note:
Always check the vehicle load rating before using a boom with sprayer,
ensuring total weight is acceptable. Do not exceed the recommended rating.
Product Usage Instructions
- Remove the tank lid and ensure that the tank is clean and free of any foreign material. Rinse the tank to remove any residue before filling it with water for testing.
- To familiarize yourself with the sprayer and check for leaks, it is essential to test the sprayer with plain water after connecting a boom before actual spraying is attempted. This will prevent the loss of expensive chemicals.
- Read and understand the owner’s manual before using the boom. Test and use the boom in accordance with the provided instructions.
- When filling, using, cleaning, and servicing the boom, always read and follow the chemical label instructions and wear appropriate protective gear.
Models
- MX408-QJD (5303666)
- MX410-QJD (5303667)
- MX412-QJD (5303668)
- MX517-QJD (5282865)
WARNING:
Always be aware of surroundings when folding and unfolding boom, especially
overhead powerlines.
General Information
Thank You and Congratulations on purchasing your new boom. The purpose of this manual is to assist you in operating and maintaining your boom.
Please read it carefully, as it furnishes information which will help you achieve years of trouble-free operation.
WARNING:
- To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
- Cancer and Reproductive Harm. www.P65Warnings.ca.gov.
Any Questions, Comments or Problems:
Call your nearest Cimarron Location and speak with one of our Friendly
Technical Support Staff.
BAKERSFIELD, CA
| COLUMBUS, NE
| DOTHAN, AL
| FARGO, ND
| HOPKINSVILLE, KY
|
---|---|---|---|---|---
MANKATO, MN
| NEWTON, KS
| PASCO, WA
| TEMPE, AZ
|
Technical Specifications
These booms weighs approx.:
- MX408-QJD (5303666) …………………………………….. 45 Lbs.
- MX410-QJD (5303667) …………………………………….. 50 Lbs.
- MX412-QJD (5303668)………………………………..55 Lbs.
- MX517-QJD (5282865)………………………………..95 Lbs.
Always check the vehicle load rating before using a boom with sprayer, ensuring total weight is acceptable. Do not exceed the recommended rating.
IMPORTANT
- Remove tank lid and be sure the tank is clean and free of any foreign material. Rinse tank out of any tank residue before filling with water to test.
- It is VERY important to test the sprayer, after connecting a boom, with plain water before actual spraying is attempted. This will enable you to familiarize yourself with the sprayer and check for leaks without the possibility of losing any expensive chemicals.
WARNING
Read and Understand the Owner’s Manual before using this boom. Test and use
in accordance to instructions. Read and Follow chemical label instructions and
wear protective gear when filling, using, cleaning and servicing the boom.
- Exercise Caution in vehicle handling when towing/hauling a filled sprayer to avoid loss of control or overturning.
- Keep Sprayer and Spray materials away from other people, children and pets.
- Do Not Turn on Power to the sprayer, until ready to spray in order to avoid unintentional spray release.
- Do Not Use on steep slopes. A full sprayer could cause loss of control or overturn sprayer and vehicle.
- Always operate up and down a slope, never across the face of a slope.
- Keep all movement on slopes slow and gradual. Do not make sudden changes in speed, directions or turning. Do not start or stop suddenly when going uphill or downhill.
- Stop on level ground, set the parking brake and shut off engine before leaving the operator’s position for any reason.
- Keep all parts in good condition and properly installed. Fix damaged or worn parts immediately.
- Caution should be taken when towing and/or using any sprayer. The sprayer combined with the weight distribution, turning radius and speed of vehicle can result in damage to vehicle, sprayer and/or boom or severe injury or death, if not used properly.
- Improper use or handling of chemicals could result in serious injury or illness, or could cause damage to the environment.
Calibration
- Chemical labels may show application rates in gallons per acre, gallons per 1000 square feet or gallons per 100 square feet. You will note that the tip chart shows 2 of these rating systems.
- Once you know how much you are going to spray, then determine (from the tip chart) the spraying pressure (PSI) and the spraying speed (MPH).
- Determining the proper speed of the pulling vehicle can be done by marking off 100, 200 and 300 feet. The speed chart indicates the number of seconds it takes to travel the distances. Adjust the throttle until you travel the distances in the number of seconds indicated by the speed chart. Once you have reached the throttle setting needed, mark the throttle location, so you can stop and go again, returning to the same speed.
- Add water and proper amount of chemical to the tank and drive to the starting place for spraying.
Tip Selection
Important Note:
The tips supplied as standard with this boom assembly are number AIXR11003VP
tips, when you refer to the spray tip rate chart found in this owner’s manual,
you will note that they have a GPA range of 10.7 to 17.8 GPA (Gallons Per
Acre). This is tabulated at 5 MPH and from 15-40 psi and 20” nozzle spacing.
These rates are based on water. Please read this tip selection section
carefully before attempting to operate your boom assembly.
The selection of proper tips for the boom is determined by the gallon per acre (GPA) requirement, which is specified on the chemi-cal label. The following characteristics also have a determining factor and must be considered:
- Speed of spraying (MPH)
- Boom nozzle spacing (specified in inches)
- Solution weight and conversion factor (CF)
- Gallons of solution to be sprayed per acre
- Spraying pressure
Nozzle Spacing
If the nozzle spacing on your boom is different from those tabu-lated,
multiply the tabulated GPA coverage by one of the follow-ing actors.
Where Tables are Based on 20″ Nozzle Spacing
Other Spacing| 8″| 10″| 12″| 14″| 16″| 18″| 22″| 24″| 30″
Conversion
Factor
| 2.5| 2| 1.67| 1.43| 1.25| 1.11| .91| .83| .66
Where Tables are Based on 30″ Nozzle Spacing
Other Spacing| 26″| 28″| 32″| 34″| 36″| 38″| 40″| 42″| 44″
Conversion
Factor
| 1.15| 1.07| .94| .88| .83| .79| .75| .71| .68
Where Tables are Based on 40″ Nozzle Spacing
Other Spacing| 28″| 30″| 32″| 34″| 36″| 38″| 42″| 44″| 48″
Conversion
Factor
| 1.43| 1.33| 1.25| 1.18| 1.11| 1.05| .95| .91| .83
Based on the minimum overlap required to obtain uniform distribution with 110° tips and 20” spacing. Suggested Minimum Spray Height: 16”-18” above what is being sprayed (to plant, not ground). Optimum Spray Height: 20”
- 110° wide, tapered flat spray angle with air induction technology for better drift management
- Made of 2-piece UHMWPE polymer construction which provides excellent chemical resistance, including acids, as well as ex-ceptional wear life
- Compact size to prevent tip damage
- Excellent for systemic products and drift management
Parts List
MX408-QJD (5303666) Series Boom Component Breakdown & Parts List
MX408-QJD (5303666) Series Boom Component Breakdown & Parts List
The AIXR TeeJet Flat Spray Tip offers the benefits of obtain-ing excellent drift resistance without compromising spray coverage. Tips producing very coarse droplets do minimize drift but do not provide the same surface coverage as tips that produce smaller droplets. In some applications, inade-quate coverage decreases the effectiveness of the applied chemicals.
AIXR Features and Benefits
- 110° wide, tapered flat spray angle with air induction technology for better drift management
- Made of 2-piece UHMWPE polymer construction which provides excellent chemical resistance, including acids, as well as exceptional wear life
- Compact size to prevent tip damage
- Removable pre-orifice
- Excellent for systemic products and drift management
MX410-QJD (5303667) Series Boom Component Breakdown & Parts List
MX410-QJD (5303667) Series Boom Component Breakdown & Parts List
The AIXR TeeJet Flat Spray Tip offers the benefits of obtain-ing excellent drift resistance without compromising spray coverage. Tips producing very coarse droplets do minimize drift but do not provide the same surface coverage as tips that produce smaller droplets. In some applications, inade-quate coverage decreases the effectiveness of the applied chemicals.
AIXR Features and Benefits
- 110° wide, tapered flat spray angle with air induction technology for better drift management
- Made of 2-piece UHMWPE polymer construction which provides excellent chemical resistance, including acids, as well as exceptional wear life
- Compact size to prevent tip damage
- Removable pre-orifice
- Excellent for systemic products and drift management
MX412-QJD (5303668) Series Boom Component Breakdown & Parts List
MX412-QJD (5303668) Series Boom Component Breakdown & Parts List
The AIXR TeeJet Flat Spray Tip offers the benefits of obtain-ing excellent drift resistance without compromising spray coverage. Tips producing very coarse droplets do minimize drift but do not provide the same surface coverage as tips that produce smaller droplets. In some applications, inade-quate coverage decreases the effectiveness of the applied chemicals.
AIXR Features and Benefits
- 110° wide, tapered flat spray angle with air induction technology for better drift management
- Made of 2-piece UHMWPE polymer construction which provides excellent chemical resistance, including acids, as well as exceptional wear life
- Compact size to prevent tip damage
- Removable pre-orifice
- Excellent for systemic products and drift management
MX517-QJD (5282865) Series Boom Component Breakdown & Parts List
MX517-QJD (5282865) Series Boom Component Breakdown & Parts List
AIXR TeeJet Flat Spray Tip offers the benefits of obtaining excellent drift resistance without compromising spray cover-age. Tips producing very coarse droplets do minimize drift but do not provide the same surface coverage as tips that produce smaller droplets. In some applications, inadequate coverage decreases effectiveness of the applied chemicals.
AIXR Features and Benefits
- 110° wide, tapered flat spray angle with air induction technology for better drift management
- Made of 2-piece UHMWPE polymer construction which provides excellent chemical resistance, including acids, as well as exceptional wear life
- Compact size to prevent tip damage
- Removable pre-orifice
- Excellent for systemic products and drift management
Warranty Info
LIMITED WARRANTY FOR NEW Cimarron EQUIPMENT
WHO MAY USE THIS LIMITED WARRANTY
This limited warranty (the “Limited Warranty”) is provided by Fimco, Inc.
(“Cimarron Equipment“) to the original purchaser (“you”) of the Equipment (as
defined below) from Cimarron Equipment or one of Cimarron Equipment’s
authorized dealers. This Limited Warranty does not apply to any subsequent
owner or other transferee of the Equipment. THIS LIMITED WARRANTY GIVES YOU
SPE-CIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
WHAT THIS LIMITED WARRANTY COVERS AND FOR HOW LONG
Cimarron Equipment warrants that any registered new Equipment will be free
from defects in material and workmanship for a period of one (1) year after
delivery of the Equipment to you (the “Warranty Period”). The War-ranty Period
is not extended if Cimarron Equipment repairs or replaces the Equipment.
WHAT IS NOT COVERED BY THIS LIMITED WARRANTY. This Limited Warranty does not apply to: (1) used Equipment; (2) any Equipment that has been altered, changed, repaired or treated since its delivery to you, other than by Cimarron Equipment or its authorized dealers; (3) damage or depreciation due to normal wear and tear; (4) defects or damage due to failure to follow Cimarron Equipment’s operator’s manual, specifications or other written instructions, or improper storage, operation, maintenance, application or installation of parts; (5) defects or damage due to mis-use, accident or neglect, “acts of God” or other events beyond Cimarron Equipment’s reasonable control; (6) accessories, attachments, tools or parts that were not manufactured by Cimarron Equipment, whether or not sold or operated with the Equipment; or (7) rubber parts, such as tires, hoses and grommets.
HOW TO OBTAIN WARRANTY SERVICE
To obtain warranty service under this Limited Warranty, you must (1)
provide written notice to Cimarron Equipment of the defect during the Warranty
Period and within thirty (30) days after the defect becomes apparent or the
repair becomes neces-sary, at the following address: Cimarron Equipment, 1000
Fimco Lane, North Sioux City, SD 57049; and (2) make the Equipment available
to Cimarron Equipment or an authorized dealer within a reasonable period of
time. For more information about this Limited Warranty, please call:
800-274-1025
WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Cimarron Equipment shall, at its own cost, and at its option, either repair or replace the defective Equipment or part. Cimarron Equipment will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.
LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDIES. THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES, AND Cimarron EQUIPMENT’S SOLE LIABILITY, FOR ANY BREACH OF THIS LIMITED WARRANTY. TO THE EXTENT APPLICABLE, ANY IMPLIED WAR-RANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE WARRANTY PERIOD, AND THE REMEDIES AVAILABLE FOR BREACH THEREOF SHALL BE LIMITED TO THE REMEDIES AVAILABLE UNDER THIS EXPRESS LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL Cimarron EQUIPMENT’S LIABILITY UNDER THIS LIMITED WARRANTY EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE EQUIPMENT, NOR SHALL Cimarron EQUIPMENT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Contact Information
- BAKERSFIELD, CA 4618 SACO RD, 93308
- 661.391.9081
- Toll Free: 877.724.2236
- F: 661.391.9085
COLUMBUS, NE
- 5834 23rd ST, 68601
- 402.564.4544
- Toll Free: 800.274.1025
- F: 402.564.0549
DOTHAN, AL
- 2401 FORRESTER RD, 36301
- 334.673.0580
- Toll Free: 800.227.4098
- F: 334.673.1974
FARGO, ND
- 4350 48th AVE N, 58102
- 701.280.2862
- Toll Free: 800.373.4084
- F: 701.293.0961
HOPKINSVILLE, KY
- 3303 PEMBROKE RD, 42240
- 270.886.0296
- Toll Free: 800.637.7172
- F: 270.885.7392
MANKATO, MN
- 907 SOUTHBEND AVE, 56001
- 507.377.6295
- Toll Free: 800.722.9376
- F: 507.388.4668
NEWTON, KS
- 7000 SCHABEN CT, 67114
- 316.283.4444
- Toll Free: 800.394.7662
- F: 316.293.4646
PASCO, WA
- 3035 TRAVEL PLAZA WAY, 99301
- 509.488.6631
- Toll Free: 800.634.2026
- F: 509.488.2927
TEMPE, AZ
- 8464 KYRENE RD, 85284
- 480.705.8047
- Toll Free: 877.705-8047
- F: 480.705.8048