HPM LWK0110WBL Portable LED Worklight Instruction Manual
- June 9, 2024
- HPM
Table of Contents
Portable LED Worklight
Instruction Manual
Cat. No: LWK0110WBL, LWK0120WBL,
LWK0130WBL, LWK0220WBL,
LWK0240WBL
Specification
Cat. No.| LWK0110WBL| LWK0120WBL| LWK0130WBL|
LWK0220WBL| LWK0240WBL
---|---|---|---|---|---
Nominal Input Voltage| 230-240 V a.c 50 Hz
Input Power| 11 W| 23 W| 32 W| 22 W| 47 W
Lumens Output| 730 lm| 2040 Ern| 2250 Ern| 2 x 730 Ern| 2 x 2040 lm
Colour Temperature| Cool White 4000K Nominal
Protection Class| Class 1
Lens/Glass| 4 mm thick tempered glass
IP Rating| 1P44
Length of Power cord| 1.8 m| 3 m
Weight (excl. packaging)| 1.1 kg| I 1.7 kg| I 2.5 kg| 4.1 kg| I 5.5 kg
Height Adjustment| N/A| Tripod: Min 0.65 m, Max. 1.25 m
Assembly
For LWK0110WBL, LWK0120WBL and LWK0130WBL mount the head lamp on the stand and
fix in place with mounting bolt. Tighten to secure.
For LWK0220WBL and LWK0240WBL
- Release the 3 leg adjustment bolts, set the 3 legs and allow to lock in position as shown in diagram.
- Mount the cross bar on to the tripod stand and fix in place with mounting bolt. Tighten to secure.
- Mount the head lamps on the cross bar and fix in place with mounting bolt. Tighten to secure.
- Set the height of the worklight to desired position and tighten the height adjustment knobs.
- Tilt and swivel the head lamps to desired position. Tighten moulded knob. When adjusting the head lamps ensure no strain is placed on the supply cord.
Maintenance and Storage
- The worklight requires very little care and maintenance. Simply clean the lens/glass regularly with a non-abrasive cleaner.
- Wrap power cord around storage hooks when not in use.
Product Notes
-
This product must be installed and used as per these instructions.
-
When the worklight is used outdoors it should not be exposed directly to the elements.
-
Do not operate in close proximity to combustible materials or substances affected by heating or drying. Keep a minimum distance of 0.5m from adjacent objects. 0.5m
-
This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should be discarded.
-
This product has been designed to operate in ambient temperatures -10°C to +40°C.
-
Recommended for use only on circuits with Earth Leakage Protection (with RCD).
-
This product is not suitable for use in hazardous environments and/or corrosive areas.
-
An IP rating of IP44 is generally considered suitable for external walls with supplementary protection such as overhanging eaves.
-
The material in this product may vary in colour from batch to batch. Colour matching from one batch to another cannot be guaranteed.
-
Extended exposure to UV rays (such as exposure to direct sunlight) may cause discolouration of this product.
-
This product is not suitable for marine environments such as areas subject to salt spray and/or mist.
-
This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual property remains the property of Legrand in all
cases. -
Legrand reserves the right to modify the specification of this product at any time.
Warranty
Legrand warrants this product for a period of 3 years from the date of
purchase.
These goods come with guarantees that cannot be excluded under the Australian
and New Zealand Consumer Laws. You are entitled to a replacement or a refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired if the goods
fail to be of acceptable quality and the failure does not amount to a major
failure. See the Warranty card enclosed with this product for further details.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>