Schneider Electric N250MJ NF Panelboard Installation Kit Owner’s Manual
- June 16, 2024
- Schneider Electric
Table of Contents
Schneider Electric N250MJ NF Panelboard Installation Kit
Product Information
Specifications
- Brand: Square D
- Commercial ref: N250MJ
- Range: NF Panelboards
- Product Description: NF Panelboard Acc. Main Breaker Installation Kit 250A, W/J Frame
- Compliance status: RoHS (10 substances) – Compliant without the use of exemption
Instruction
Date: Wednesday, May 17, 2023
Object: Schneider Electric RoHS declaration (RoHS: Restriction of
Hazardous Substances)
Dear Customer,
Effective July 1st, 2006, the European Directive 2002/95/EC -“Restriction of
Hazardous Substances” (RoHS), its recast 2011/65/EU of June 8th, 2011, the
Delegated Directive (EU) 2015/863 of March 31st 2015, restricts the use in
Europe in certain electrical and/or electronic equipment of lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated
diphenyl ethers (PBDE) flame retardant, and from July 22nd 2019,
Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl
phthalate (DBP), Diisobutyl phthalate (DIBP). Schneider Electric decided to
make RoHS compliance of its products one of its priorities, even if they do
not fall in RoHS scope, and most of Schneider Electric products are RoHS
compliant. This stance is fully in line with Schneider Electric environmental
policy and EN IEC 63000:2018 standard.
The information below provides the current product status according to regulation in force at the date of publication of this present document. Any future changes, either in product design or in the Directive may change the status reported here. In case the product is inside the legal scope of RoHS, please note that this document is not the CE declaration. To access to the CE declaration, please refer to the Schneider Electric download center. In the context of the sustainable development policy of our Company we continuously work towards products and services which reduce the impact on the environment or human health when used for their intended purpose and in conditions stated in the documentation provided by Schneider Electric.
In the following declaration, a “Proactive compliance” wording means that the product is not an EEE or not in the legal scope of the regulation, but is in line with the substance restrictions and corresponding exemptions. Shall you need any further information or have specific questions (eg. related to phased-out products), our Customer Care Centers will support you. Please Note: You can find more information about Schneider Electric’s environmental commitment on Green Premium webpage
Best Regards,
Unless otherwise stated in the table, the data shown in this spreadsheet are
related to the following production Date Code: 20/2023 (Week / Year)
The data shown in this spreadsheet are related to the following version of the
RoHS directive: 2011/65/EU
Commercial ref.
Brand
| Range
Product description
| Compliance status
---|---|---
N250MJ
Square D
| NF Panelboards
NF Panelboard Acc. Main Breaker Installation Kit 250A, W/J Frame
| RoHS (10 substances) : Compliant without the use of exemption
Installation **
**
To install the NF Panelboard Acc. Main Breaker Installation Kit, follow these steps:
- Ensure that the power supply is turned off before starting the installation process.
- Remove the cover of the panelboard.
- Identify the location where the main breaker installation kit will be installed.
- Carefully align the kit with the designated area and secure it using the provided screws or fasteners.
- Connect the necessary electrical wires to the main breaker according to the wiring diagram provided.
- Double-check all connections to ensure they are secure.
- Replace the panelboard cover.
- Turn on the power supply and test the functionality of the main breaker.
Maintenance
To ensure optimal performance of the NF Panelboard Acc. Main Breaker Installation Kit, regular maintenance is recommended:
- Inspect the kit for any signs of damage or wear regularly.
- Clean the kit and surrounding area to remove any dust or debris that may affect its operation.
- Tighten any loose screws or connections.
- If any issues or abnormalities are detected, contact Schneider Electric Customer Care Center for assistance.
Troubleshooting
If you encounter any difficulties or problems with the NF Panelboard Acc. Main
Breaker Installation Kit, refer to the troubleshooting section of the user
manual or contact Schneider Electric Customer Care Center for further
assistance.
FAQ
-
Q: Is the NF Panelboard Acc. Main Breaker Installation Kit compatible with all Square D panelboards?
A: Yes, the NF Panelboard Acc. Main Breaker Installation Kit is designed to be compatible with Square D panelboards. -
Q: How do I determine the appropriate size of the main breaker for my electrical system?
A: The appropriate size of the main breaker depends on the specific requirements of your electrical system. It is recommended to consult a qualified electrician or refer to the electrical code regulations in your area for guidance. -
Q: Can I install the NF Panelboard Acc. Main Breaker Installation Kit myself?
A: It is recommended to have a qualified electrician install to ensure proper and safe installation.
Schneider Electric Industries SAS
Postal address: Le Hive
35 rue Joseph Monier – CS 30323
F-92506 Rueil Malmaison Cedex
Phone: +33 (0)4 76 57 60 60
http://www.schneider-electric.com
Legal information:
Société par actions simplifiée au capital de 896,313,776 euros
954 503 439 rcs Nanterre – code APE : 2712Z
Siret : 954 503 439 01719
n°ident. TVA : FR 04 954 503 439
Siège Social ! 35, rue Joseph Monier
F – 92500 Rueil-Malmaison
References
- Contact Support | Schneider Electric Global
- schneider-electric.com/en/download/search/?docTypeGroup=3541954-Certificates&docType=1555863-Declaration+of+conformity