nordlux 2015026103 Oja 42 LED Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux 2015026103 Oja 42 LED Light
Product Information
The product is a light fixture with the following features:
- Model: OJA
- IP Rating: IP54
- Scene Select: Yes
- Power Supply: 220-240V, 50Hz
- Dimmable: Yes
- Color Temperature: 4000K and 3000K
- Reset Function: Yes
Product Usage Instructions
- Make sure to read and understand the installation instructions before proceeding.
- If you are planning to install the light fixture in your bathroom, it is recommended to consult with a local electrician due to potential extra local installation/safety requirements.
- Ensure that the power supply is switched off before starting the installation.
- Mount the light fixture according to the provided mounting instructions. Refer to the Monteringsanvisning | Montageanleitung | Mounting instruction | Installationsanvisningar | Instructions de montage | Montage-instructies section for detailed instructions.
- Connect the power supply to the light fixture following the electrical connections diagram provided in the user manual.
- After installation, turn on the power supply and test the light fixture.
- To select different scenes, use the Scene Select feature on the light fixture.
- To adjust the brightness, use the dimming function. The light fixture supports multiple brightness levels, including 100% and 20%.
- To change the color temperature, use the color temperature settings. The light fixture supports both 4000K and 3000K color temperatures.
- If you want to reset the light fixture to its default settings, use the Reset Function.
- For proper disposal of the product, contact your local waste management service or the store where you purchased the product. Follow the guidelines provided by your local authorities for recycling electronic waste.
POWER
ON/OFF
INSTALLATION INSTRUCTIONS
WIRING
FEATURES
- 3-STEP MOODMAKER™ FUNCTION·WORKS WITH A NORMAL WALL SWITCH
- MEMORIZING PREVIOUS MODE
RESET FUNCTION
If
you want to install this light fixture in your bathroom and knowing some
countries have extra local installation/safety requirements, always contact
your local electrician before installation (eg. France) !
SYMBOLS
- IP5X: Dust is prevented from entering the lamp in amounts that can cause damage to the function/safety of the lamp.
- IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- The lamp is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. (*) Contact your local electricity authority for advice.The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
- For indoor use only.
References
Read User Manual Online (PDF format)
Loading......