ATOMSTACK F3 Honeycomb Laser Bed Instruction Manual
- June 13, 2024
- ATOMSTACK
Table of Contents
ATOMSTACK F3 Honeycomb Laser Bed
Product Information
The F3 honeycomb laser bed is a component of the product. It is designed to be used with M410 and M414 screws. The bed has an L-shaped structure and comes with various numbered parts.
Product Usage Instructions
- Start by assembling the F3 honeycomb laser bed using the provided screws. Use the M410 screws to secure the parts marked with “L” and “01”. Use the M414 screws for the parts marked with “R” and “02”.
- Continue assembling by using the M410 screws for the parts marked with “L”, “L”, “M410”, and “M410”. Use the M414 screws for the parts marked with “R”, “R”, “1”, “2”, “3”, and “4”.
- Proceed to assemble the remaining parts using the specified screws. Use the M414 screws for the parts marked with “M414”, “M414”, “5”, and “03”. Use the M410 screws for the part marked with “6”.
- To prevent smoke from blackening the desktop during cutting, it is recommended to place a paper pad under the cutting protective panel.
- For detailed warranty policy, please visit our official website at: www.atomstack.com. For technical support and service, please email: support@atomstack.com.
What’s In The Box
Installation
It is recommended to pad paper under the cutting protective pannel to prevent smoke from blackening the desktop.
Warranty
- For detailed warranty policy,please visit our official website at: www.atomstack.com.
- For technical support and service,please email: support@atomstack.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>