iiyama ProLite TW2424AS-B1 Monitor User Guide

Polite TW2424AS-B1 Monitor
User Guide

iiyama ProLite TW2424AS-B1 Monitor

Quick Start Guide
ProLiteTW222345

Thank you for choosing to purchase an iiyama Touch Panel PC.
We suggest you take a few minutes to read the enclosed Safety Guide before installing and operating the Touch Panel PC for the first time.
A more comprehensive User Manual is available for download from the iiyama website; https://iiyama.com
Please keep the User Manual in a safe place for future reference.

• If you experience any difficulties on the iiyama website please contact the iiyama service centre for assistance.

OPERATING THE TOUCH PANEL PC

For details regarding operating procedure, see the User Manual on the iiyama web site.

CHECKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the Touch Panel PC. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.

• AC Adapter
• Power Cable (Type: EU/UK)
• Cable Cover
• Screws for Cable Cover (2pcs)
• M4 Screws for VESA Mount (5pcs)
• Safety Guide
• Quick Start Guide (this document)
• Applicable AC Adapter

ProLite TW2223AS / ProLite TW2424AS

5F of Building F, Hengchangrong(Xinghua) Sci-Tech. Park, Haunting Road, Longhead District, Shenzhen, Guangdong, P. R. China
Input Voltage| 100-240VAC
Input AC Frequency| 50/60Hz
Output Voltage| 12.0VDC
Output Current| 5.0A
Output Power| 60.0W
Average Active Efficiency| 88.32% minimum
Efficiency at Low Load (10%)| 88.06% minimum
No-Load Power Consumption| 0.20W maximum

RF & POWER

ProLite TW2223AS

ProLite TW2424AS

Hereby, iiyama Corporation declares that the radio equipment type ProLite TW2223AS/TW2424AS is in compliance with Directive 2014/53/EU, “ERP Directive” 2009/125/EC and “RoHS Directive” 2011/65/EU. The full text of the EU
declaration of conformity is available in “DOWNLOADS” of the ProLite TW2223AS/TW2424AS at the following internet address: https://iiyama.com

SPECIAL NOTES ON THE TOUCH PANEL

CAUTION
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend you use a conductive stylus (tip R0.8 or over) or finger.

INSTALLATION

CAUTION

• Before installation, please make sure the wall or desktop arm is strong enough to hold the necessary weight of the Touch Panel PC.

< BUILT-IN EQUIPMENT

CAUTION
This product is not designed for the purpose of being used in high temperature environment.
If the product is placed in an external cabinet, you need to design cooling fans and vents to keep the temperature low enough to fi t in the product temperature specification.

< WALL MOUNTING

A : Mounting Stage
B : Screw
C : Chassis

CAUTION
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken. Tighten the M4 Screws (4pcs) with washer which “L” length is 4mm to fasten the Touch Panel PC. Using a screw longer than this may  cause electric shock or damage because it may contact with the electrical parts inside the Touch Panel PC.
< ROTATING THE TOUCH PANEL PC

Available

Not Available

This Touch Panel PC is designed to be compatible in landscape, portrait and face-up modes.

CONTROLS AND CONNECTORS

● ProLite TW2223AS
<Front

1. Power Switch, Ein

2. USB 2.0 Connector, USB 2,0 Anschluss,

3. RJ45 Connector, RJ45 Anschluss,

4. USB 2.0 Connector, USB 2,0 Anschluss,  (USB)

5. Serial port : For maintenance personnel use, (DC5V, 100mA)

6. Serial port : For maintenance personnel use,

7. SD Card Slot,

8. Headphone & Microphone Audio
   <Back and Bottom

9. USB OTG Connector, USB OTG Anschluss, (DC5V, 500mA) (OTG)

10. USB Connector, USB Anschluss,  (USB3.2 Gen 1: 5Gbps, 5V, 900mA)

11. HDMI Connector, HDMI Anschluss,

12. Connector for AC Adapter ( : Direct current),

13. Speakers,

14. Not available on this model,

● ProLite TW2424AS
< Front

1. Volume + Button,

2. Volume – Button,

3. Power Switch,

4. Connector for AC Adapter ( : Direct current),

5. HDMI Connector, HDMI Anschluss,  (HDMI IN)

6. USB Type-C Connector,  (DC5V, 900mA) (USB Type-C)

7. USB Connector, USB Anschluss,  (USB3.2 Gen 1: 5Gbps, 5V, 900mA)
   <Back and Bottom

8. USB 2.0 Connector,

9. USB 2.0 Connector,

10. RJ45 Connector,

11. Headphone Connector,

12. Microphone Connector,

13. Speakers,

14. Not available on this model,

CONNECTING YOUR TOUCH PANEL PC

1. Connect the AC Adapter to the Touch Panel PC first and then connect to the power source.
2. Turn on your Touch Panel PC.

NOTE

• The Class I pluggable equipment Type A must be connected to protective earth.
• Make sure that the building installation has a circuit breaker of 120/240V, 20A (maximum).
• The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the  monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
• The initial setup of the operating system takes approximately 5-10 minutes.
• To setup the Android OS for the touch computer, turn on the touch computer and follow the instructions on the screen.

Example of Connection

<Back

A : USB Cable (Not included)
B : LAN(RJ45) Cable (Not included)
C : Mouse
D : Keyboard
E : SD Card (Not included)
F : HDMI Cable (Not included)
G : AC Adapter
H : Power Cable (Type: EU/UK)
I : Audio Cable(Not included)
J : USB OTG Connector (Not included)
● ProLite TW2424AS
< Back 

A : AC Adapter
B : Power Cable (Type: EU/UK)
C : HDMI Cable (Not included)
D : USB Type-C Connector (Not included),
E : Mouse
F : USB Cable (Not included)
G : Keyboard
I J : Audio Cable( Not included)

FITTING AND REMOVAL OF CABLE COVER

Put a piece of soft cloth on the table beforehand to prevent the Touch Panel PC from being scratched. Lay the Touch Panel PC fl at on a table with front face down.

< Fitting 

1. Put the connected cables through the holes of the cable cover.
2. Fix the cable cover firmly with the screws.

< Removal
Unscrew to remove the cable cover.

<Back

A: Cable Cover
B : Holes
C : Screws

TROUBLE SHOOTING

If the picture does not appear, please check the steps below for a possible solution. For details regarding TROUBLE SHOOTING procedure, see the User Manual on the Iiyama website.

Check

• The AC Adapter and Power Cable are firmly seated in the connector and the socket.
• The Power Switch is turned ON.
• The AC socket is live. Please check with another piece of equipment.
• If the Touch Panel PC is in sleep mode, press the Power Switch or any other button or touch the screen.
•  Increase the Brightness.
• The pins of the connectors are not crooked or broken.

https://www.iiyama.com/signup

References

• iiyama

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>