iiyama UC CAM75FS-1 USB Camera User Manual
- October 27, 2023
- iiyama
Table of Contents
UC CAM75FS-1 USB Camera
Safety Instructions
Before using and operating this equipment, please read and observe the following precautions carefully to avoid dangerous or illegal operations.
Placement
DO NOT use the device in dusty and damp places to avoid causing internal
circuit failures.
DO NOT place this equipment near heating objects such as electric heaters.
Normal operating temperature is 0- 40 , normal operating humidity is 10%-
90%RH.
Children’s Health
The product and accessories may contain some small- part. Please place them beyond the reach of children in avoidance of swallowing danger.
Power Supply
Please use the standard cable of this product. Please disconnect the power supply when there is no one in the room or when it is not used for a long time.
Water Precaution
This device is not waterproof, please keep it dry.
Maintenance
Please contact professional service personnel for maintenance services . When
the equipment is damaged, please do not disassemble it for repair without
permission, please call customer service to report for repair.
DO NOT insert any sharp or pointed object into the device.
DO NOT drop or hit the device to avoid damage to the device.
Statement
Intellectual property right statement: The hardware design and software of
this product are covered by the patents.Anyone who reproduces this product or
the content of the instruction without the authorization of the Company shall
assume legal liabilities. This manual is for reference only, and the actual
function of the final product is subject to the actual function of the product
received by the customer.
The picture is for reference only, please refer to the actual product. The
company reserves the right to improve and change the appearance and design of
the product without notice.
Appearance Introduction
Please be familiar with the device interface and keys before use.
- Microphone
- Lens Cover
- Indicator Light
- Camera
- Camera Bracket
- USB Type- C port
Note: Slide the Lens Cover left and right to cover the camera
Connection
Step 1: When the product is made of iron back plate or rear shell, rotate the camera bracket to the corresponding position. The silica gel pad on the bracket is in contact with the top of the product, and the silica gel press on the bracket is in contact with the iron back plate. A magnet is placed inside the silica gel press to adsorb the iron back plate. As shown in figure 1
Step 2: When the product is a non- iron back plate or back shell, the silica gel pressing block on the bracket is in contact with the non- iron back plate, and the semicircular surface of the silicone pressing block is in contact with the top of the non- iron back plate. As shown in figure 2
Step 3 : Please use the dedicated USB cable to connect the product with
the display. As shown in Figure 3
Accessories
Please check whether there are the following items in the product packing box:
- USB cable× 1
- User Manual (this document)
CE MARKING DECLARATION OF CONFORMITY
This USB Camera complies with the requirements of the EC/EU
Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage
Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The
electro-magnetic susceptibility has been chosen at a level that gives correct
operation in residential areas, business and light industrial premises and
small-scale enterprises, inside as well as outside of the buildings. All
places of operation are characterized by their connection to the public low
voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The
Netherlands
| We recommend recycling of used product. Please contact your dealer or iiyama
service center.
Recycle information is obtained via the Internet,
using the address: http://www.iiyama.com
You can access the Web page of different countries from there.
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>