LEDVANCE 1200 16W-840 2400LM CONN T8 LED Connected T8 EM User Guide
- June 13, 2024
- LEDVANCE
Table of Contents
LEDVANCE 1200 16W-840 2400LM CONN T8 LED Connected T8 EM User Guide
Hereby, LEDVANCE GmbH declares that the radio equipment is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: http://www.ledvance.com
/declaration-of-conformity.13)
Wireless radio used in Zigbee lamp s/luminaires/components 2400 – 2483.5 MHz,
max. RF output power 9.5dBm.14)
1. Installations on Electromagnetic ballast 15
GB Please ensure that for Electro Magnetic (EM) application existing fluorescent starter is replaced with LED TUBE starter (included in each packaging).
EM (CCG)
This lamp is designed for general lighting service (excluding for example explosive atmospheres). This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted. In case of doubt regarding suitability of the application please measure tc max temperature on the product. In case of multi lamp luminaire application measure tc max temperature of all installed lamps. Please use a flexible thermos Ensor (e.g. “Type K”). LED TUBE T8 EM Connected P operated above tc max can lead to premature aging and failure of devices. LED TUBE T8 EM Connected P emits light only with a limited beam angle not like a fluorescent tube with 360° output. Not usable in tandem circuitry.
2. Installations on Mains (without ballast)16
Cut wires and remove ballast and follow below instructions
Mains
Installation guide
Warning! The fixture has been modified and can no longer operate the originally specified T8 Fluorescent lamp. Please use only LEDVANCE LED TUBE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>