VEVOR WP9600A Sewer Camera Pipe Inspection Camera User Manual

PIPE INSPECTION SY STEM
User M anual
Applicable model：WP9600A / 9600A

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
[email protected]

This is the original instruction, please read all manual instructions carefully before operating.
V EV OR r be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.

ATTE NTIONS

1. Please read the manual carefully before using it.
2. Handle it carefully during operation, avoid throwing down or pressing it heavily.
3. please keep distance from the system when charging.
4. After being used, turn off the display and pull out all the connection joints.

DESCRIPTION

1.  Co
2. High resolution camera and clear picture.
3. Night vision.
4. High-quality special cable, waterproof and anti-corrosion/cold/tensile.
5. 12V 4500MA lithium batt
6. With sun-visor for a bright environment outside.
7. Range of Application：Water-supply pipe, Air-conditioner pipe, Cable pipe, Pipeline vacuum system, PLUNBIN pipe, Buildings, Sunken pipe.
8. Operating Temp: -10°C to 60°C

PRODUCT SPECIFICATION

INSTRUCTION FOR PRODUCT

1. Camera

1. Metal Contact Chip
2.  Spring
3. Highlight White Led
4. Camera Lens

2. Coil

SPECIAL DETECTION CABLE FIXER

3. Cell Box

1. Monitor Video
2. Power of Monitor
3. Adjacent Coil Plug
4. AV Output
5.  Batt
6. Power Input for Charger
7. Light-Degree Adjustment for White Light LED
8.  Power Switch
9.  Power Light

System Installation

1. Vital: turn off the power switch, connect the video camera and the monitor, or the video camera and the monitor may be damaged.

2.  Connect the camera to 3-coil plug, 2-cell box and the 1-monitor. (Pic.1)

3. Turn on the power switch in the power box, the indicator light of the monitor is on, the switchboard

4.  Install the video camera with the protective cover slightly and put it into the pipe, rotate the coil to a proper depth.

5. Adjust LED light degree adjuster to proper light degree.
   For videotape, refer to the DVR operation details (display operation:Recording Type )

6.  Switch video to another large screen through video line.

7. After utilization, mover the camera from the pipe carefully, take a clean, sof it and put it back.

Charging
When the batt

1. Take out the batt
2. Connect the charger to the batt
3.  Connect the charger to the alternating current of 100-240V. The red indicator means charging.
4. The green indicator means finishing charging.
   Notes: To make sure the batt can not recharged.

TROUBLE SHOOTING

V. Check whether the connection of cable and power suppl: is normal or loos(
3.Check whether the monitor is connected to the power suppl: normall: .
5.Check whether the cable is broken.
0. Check whether there is water in the front of the camera or the camera is damaged.
6.When using the camera, please put on the protective cover first, so as not to cause the camera to collide with hard objects and damage, unable to display images.
Problems with LED lights| 2. Read the manual and check the correct wa: to turn on the light
V. Check whether there is water in the front of the camera, which causes the LED to not light up.
Not running| 2.Check whether the batt
V. Check whether the displa: screen is damaged.
3.Check that the displa: screen is connected to the power suppl: normall: .
Photo/video cannot be saved| 2. Check w
V. Check if there is an: foreign matter or deforma
Cannot format|
Unable to charge| 2.Check the char
V. Check whether the charger is damaged.
3.When the batt batt
Broken cable| 2. It is recommended to use the cable on the pipe with a diameter ? 60cm. Pa: attention to the force of pushing the cable to avoid breaking the
detection line.
2. This product is only used for pipeline detection and inspection and cannot be used for other purposes.
Cable knotting| 1.When retracting and releasing cables, it shall be noted that the cables shall not be crossed and knotted, and the bending radian of cables shall not be less than 90 degrees.
2.When retracting the cable, pay attention to cooperate with the rotating iron frame to orderly recycle, and do not use it violently.
Equipment cleaning| When cleaning the equipment, turn off the power before cleaning to avoid damage to the equipment
Warning| If the fault cannot be solved, please do not disassemble it by yourself. Please contact the after

OPE RATING INSTRUCTIONS FOR HD DVR

RE C/-: T
Play/+: To switch between recording and photographing. (Please refer to the icon in the top left corner)
M E NU: To access and loop the settings main menu / long press to rotate the screen 0, 90, 180 or 270 degrees

: To zoom out
<: To zoom in the image 0-36X
POWE R: To power on/off the display screen

1. Main Menu Settings
   1. Press M E NU button the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO
   2. Press </> button to option sub-menu
   3. Press RE C button to adjust the setting”s value OR press REC button enter/confirm
   4. Press PL AY button to exit

2. Recording and Photographing
   1. Press PL A Y button to switch between Recording and photographing. (please refer to the icon in the top left corner)
   2. Press REC button tRE C button again to stop recording.

3. Photo playback on monitor
   1. Loop press M E NU button to find PHOTO.
   2. Press </> button to find Playback.
   3. Press REC button to enter,then press </> to choose one and press REC button to playback.
   4. Press PL AY button to exit.

4. Video playback on monitor
   1. Loop press M E NU button to find RECORD.
   2. Press </> button to find Playback.
   3. Press REC button to enter, then press </> to choose one and press RE C button to enter.
   4. Press REC button to playback.
   5. Press PL AY button to exit.

FCC INFORM ATION

This device complies with P two conditions:
(1) This device may not cause harmful int int

EU ENVIRONM ENTAL
PROTECTION
This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
*There are any minor changes to the numbers included in the user manual without prior notice.

EUREP GmbH
Unterlettenweg 1a,
85051 Ingolstadt, Germany
Eurep Uk Ltd
Unit 2264, 100 Ock Street, Abingdon
Oxfordshire England Ox14 5dh

Address: 250 bis boulevard Saint-Germain 75007 Paris
UK
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Shenzhen Woshijie Electronic Technology Co., LTD
Add: 5Floor, B2B 501 Building
Pingshan District, Shenzhen, China E-mail: Cust

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>