Fluance X850WC 5.0 Channel Speaker System User Manual

Fluance X850WC 5.0 Channel Speaker System

Introduction

Fluance’s X850WC 5.0 Channel Speaker System takes home audio to the next level. Re-engineered for the most immersive experience, the system boasts a range of features—from exquisite bookshelf surrounds to a detailed center channel—that promise to redefine your audio encounters, be it music or movies. With its high-end components and impeccable engineering, this system is a true testament to Fluance’s commitment to audio excellence.

Specifications

Bookshelf and Surround Speakers

• Configuration : 2 Way – 2 Driver (Wall Mountable)
• Tweeter : 1-inch Neodymium Balanced Silk Dome, Ferrofluid Cooled
• Woofer : 5.25-inch Woven Glass Fiber Composite Drivers with Butyl Rubber Surrounds
• Power Handling : 80 – 160 Watts RMS
• Frequency Response : 35Hz – 25KHz
• Sensitivity : 87dB @ 1W / 1m
• Crossover Frequency : 3100 Hz Phase Coherent – PCB Mounted Circuitry
• Impedance : 8 Ohm Compatible
• Dimensions : 11.4 x 8.1 x 9.0 inches (HxWxD)
• Weight : 11.35 pounds/speaker

Center Channel Speaker

• Configuration : 2 Way – 3 Driver
• Power Handling : 50 – 100 Watts RMS
• Frequency Response : 110Hz – 20KHz
• Sensitivity : 86dB @ 1W / 1m
• Crossover Frequency : 3000 Hz Phase Coherent – PCB Mounted Circuitry
• Impedance : 8 Ohm Compatible
• Dimensions : 6.9 x 18.5 x 9.0 inches (HxWxD)
• Weight : 15 pounds/speaker

General Specifications

• Overall Dimensions : 12.99 x 9.25 x 45.86 inches
• Item Weight : 65.3 pounds
• Maximum Output Power : 850 Watts

Product Features

High-Performance 5.0 Speaker Configuration

• Benefit : A complete 5.0 channel speaker system offering room-filling sound.
• Application : Ideal for home theaters, delivering a balanced audio experience with front bookshelf speakers, a center channel, and rear surround speakers.

Exquisite Bookshelf Surrounds

• Benefit : Compact design with the impact of tower speakers.
• Application : Can be used as either front or rear speakers to deliver immersive audio in a surround sound setup.

Detailed Center Channel Speaker

• Benefit : Ensures clear dialogue and vocal frequencies.
• Application : Enhances the clarity of spoken words in movies, making it easier to follow dialogues and enhances musical vocals.

Superior Cabinet Engineering

• Benefit : Meticulously designed wood enclosure minimizes resonance.
• Application : The acoustically inert cabinet and front-firing bass ports ensure a balanced and rich sound, reducing distortion.

Built-In Microphone

• Benefit : Allows for interactive experiences.
• Application : Adds an extra dimension to your home entertainment setup, enabling voice-activated features.

Woven Fiber Drivers

• Benefit : Improved vibrational damping and optimal linear movement.
• Application : Ensures faithful reproduction of mid-range frequencies, providing a lifelike audio experience.

Neodymium Silk Dome Tweeters

• Benefit : Produces natural high frequencies and offers spacious off-axis dispersion.
• Application : Provides crystal-clear highs irrespective of your position in the room.

Dolby Atmos Compatibility

• Benefit : Enhanced immersive experience with overhead sound.
• Application : Ideal for use in a Dolby Atmos surround sound setup.

High Power Handling

• Benefit : Can handle a wide range of power inputs.
• Application : Compatible with most amplifiers and receivers, offering a versatile setup.

Comprehensive Frequency Response

• Benefit : Covers a wide spectrum from low to high frequencies.
• Application : Delivers full-range audio, making it ideal for various types of media from music to movies.

Acoustic Suspension Design (Center Channel)

• Benefit : More controlled bass response and clearer mid-range.
• Application : Optimizes vocal clarity, making it particularly useful for dialogue-heavy content.

Wall-Mountable Bookshelf Speakers

• Benefit : Offers flexibility in setup.
• Application : Allows for custom positioning to achieve the optimal audio experience in any room.

High Sensitivity

• Benefit : Efficient conversion of power to sound.
• Application : Achieves high volume levels even with lower-powered amplifiers.

Phase-Coherent Crossovers

• Benefit : Ensures that all frequencies arrive at the listener’s ears simultaneously.
• Application : Enhances the overall coherence and realism of the audio output.

High Maximum Output Power

• Benefit : Can deliver up to 850 Watts of sound.
• Application : Suitable for large rooms and spaces, delivering a robust audio experience.

Troubleshooting

Encountering issues with your Fluance X850WC Speaker System? Here’s a list of common problems and their solutions to help you troubleshoot effectively.

No Sound Output

Issue: No sound from one or all speakers.

1. Check the Connections : Verify that all wires are properly connected to the receiver and speakers.
2. Test the Receiver : Swap the channels to confirm if the issue is with the receiver.
3. Check the Volume : Make sure the receiver and speakers are not muted or at a low volume setting.

Sound Distortion

Issue: The sound is distorted or not clear.

1. Check Speaker Placement : Make sure speakers are not placed in a corner or too close to walls as it can affect sound quality.
2. Check Cables : Damaged or low-quality cables can affect sound quality. Replace if necessary.
3. Adjust Settings : Check your receiver’s audio settings to ensure they match your Fluance system specs.

Poor Bass Response

Issue: Bass sound is weak or distorted.

1. Check the Port : Ensure the front-firing bass ports on the bookshelf speakers are not obstructed.
2. Check the Receiver Settings : Some receivers have bass management settings; make sure they are set appropriately.
3. Verify Phasing : Make sure all speakers are wired in the correct phase (+ to +, – to -).

Low Volume

Issue: Sound is too low even at high volume settings.

1. Check Sensitivity Settings : On the receiver, make sure the sensitivity is matched with the Fluance X850WC system’s sensitivity of 87dB for bookshelf and 86dB for the center channel.
2. Inspect Cables : Thin or damaged cables can result in low volume. Consider replacing them.

No Surround Sound

Issue: Not experiencing surround sound effects.

1. Verify Speaker Configuration : Make sure all speakers are correctly configured in your receiver settings.
2. Check Source : Ensure that the audio source supports surround sound formats.
3. Check Dolby Atmos Settings : If using Dolby Atmos, ensure it’s properly configured.

Built-in Microphone Not Working

Issue: The built-in microphone is not picking up sound.

1. Check Mute Settings : Make sure the microphone is not muted.
2. Inspect Connections : Ensure that any required additional connections for the microphone are properly made.
3. Restart System : Sometimes, simply restarting the entire system can resolve the issue.

Tweeter or Woofer Issues

Issue: Either the tweeter or woofer is not functioning correctly.

1. Isolate the Issue : Disconnect the suspected speaker and connect it to another channel to see if the issue persists.
2. Inspect for Physical Damage : Check for any visible damage to the woofer or tweeter.
3. Consult Support : If the speaker component is defective, consult Fluance customer support for a replacement.

Dialogue is Not Clear

Issue: The Center channel does not produce clear dialogue.

1. Check Cables : Make sure the center channel is properly connected.
2. Adjust Receiver Settings : Some receivers allow you to boost the center channel. Use this feature if available.
3. Check Source : Sometimes the issue might be with the source material. Make sure to test with multiple sources.

If these troubleshooting tips do not resolve your issues, consult the user manual or contact Fluance Customer Support for further assistance.

FAQs

What type of room is best suited for the Fluance X850WC?

The Fluance X850WC is designed to deliver room-filling sound and is well- suited for medium to large rooms, including dedicated home theaters.

Can I mount the bookshelf speakers on the wall?

Yes, the bookshelf speakers in this system are wall-mountable, offering you flexibility in setting up your audio environment.

What type of connections does the system support?

The system uses XLR connectivity, known for its high-quality audio transmission.

Is the system compatible with Dolby Atmos?

Yes, the Fluance X850WC is ideal for use as surround sound speakers in a Dolby Atmos setup.

What is the maximum output power of the system?

The speakers have a maximum output power of 850 Watts.

What’s the benefit of having a built-in microphone?

The built-in microphone allows for interactive experiences, adding a unique dimension to your home entertainment system.

Is this system wireless?

No, this is a wired speaker system that uses XLR connectors for audio transmission.

What is the weight and dimensions of the speakers?

The product dimensions are 12.99 x 9.25 x 45.86 inches, and the item weighs 65.3 pounds.

How many speakers are included in the package?

The package includes a 5.0 channel system: two front bookshelf speakers, a center channel, and two rear surround speakers.

How do the woven fiber drivers improve sound quality?

Woven fiber drivers provide improved vibrational damping and optimal linear movement, which results in a faithful reproduction of the original recording.

How do I troubleshoot if I’m not getting any sound?

Make sure all cables are properly connected, the receiver is correctly configured, and the system is not muted. If the problem persists, consult the troubleshooting guide or contact customer support.

What is the system's impedance and sensitivity?

The system is 8 Ohm compatible. The sensitivity is 87dB @ 1W / 1m for bookshelf speakers and 86dB @ 1W / 1m for the center channel.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>