FLUANCE Ai61 Powered 6.5 Inch Bookshelf Speakers User Guide
- June 4, 2024
- FLUANCE
Table of Contents
Ai61 – Powered 6.5” Bookshelf Speakers
Quick Start Guide
v1.1
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The use of apparatus in moderate climates.
CAUTION
- Minimum 5cm around the apparatus for sufficient ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Should be drawn to the environmental aspects of battery disposal.
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Introduction
Thank you for the purchase of your Fluance product. We hope you enjoy your
experience. If you have any questions please visit us at
www.Fluance.com/support.
Fluance believes everyone should experience audio in its truest form,
recreating the performance the way the artist intended. Utilizing only
superior components and expert audio engineering, their products are a
testament to the performance that can be achieved when a passion for music
takes center stage. The perfect complement to any audiophile’s lifestyle,
you’ll be enjoying live performances in your home for years to come.
Break-in Period
Our speakers have a Butyl rubber ring surrounding the cone. The break-in
period allows the rubber to loosen and stretch, allowing the cone a larger
range of movement, and resulting in better sound reproduction. We recommend
10-12 hours of play at a moderate volume to achieve this.
For additional product information, please consult the manual at:
Fluance.com/resources
What’s Included
Front & Back Panel Layout
-
Control Knob
• Volume
• Input Selection
• Power ON/OFF -
Source LED
• Blue (Solid) – Bluetooth® Paired
• Blue (Flashing) – Bluetooth® Pairing Mode
• Green (Solid) – RCA
• White (Solid) – Optical
• Purple (Solid) – USB
• Red (Solid) – Standby Mode
• Red (Flashing) – Mute
• Red (Flash x2) – Volume Set to Max
• Red (Flash x2) – Bass/Treb Set to -5 or +5
• Source Color: Blue/Green/White/Purple
(Flash x2) – Bass/Treb Set to 0
-
IR Sensor
-
Speaker Input
-
Bluetooth® Reset Pairing
-
USB Input (Audio Playback Only)
-
Optical Input
-
RCA Input
-
Subwoofer Output
-
Left Speaker Output
-
AC Input
-
Power Switch
Remote Control Layout -
Power ON/OFF
-
Volume UP/DOWN
-
Source
-
Treble UP/DOWN
-
Mute
-
Play/Pause & Bluetooth® Pairing Reset
To enable Bluetooth® Pairing Reset, press + hold for 3 seconds. -
Forward/Back
-
LED Brightness – (100% > 25% > OFF)
-
Bass UP/DOWN
Product Setup
-
Position the speakers with the Active Speaker on the right and the Passive Speaker on the left.
NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance. -
Connect one end of the speaker wire to the binding posts on the back of the Active Speaker and connect the other end of the speaker wire to the binding posts on the back of the Passive Speaker.
IMPORTANT: Ensure the same wire is connected to the same color binding post on each speaker.
NOTE: The included speaker wire is 8ft. If placing your speakers further than 8ft apart it is recommended to use standard 18 gauge speaker wire to connect the speakers over the longer distance. -
Connect the power cable to the back of the Active Speaker and set the power switch to the ON position.
EQ Adjustment
Use the Bass/Treble buttons on the Remote to adjust each from -5 to +5.
LED Behavior:
Red (Flash 2x) – Bass/Treble Set to -5 or +5
Source Color (Flash 2x) – Bass/Treble Set to 0
Note: If using a source device, with its own EQ settings, ensure it is
set to flat(0).
RCA Input
- Connect the RCA cable to your source device (Turntable, Smartphone, Computer…).
- Connect the other end of the RCA cable to the back of the Active Speaker.
- Press the Control Knob to select the RCA input (Green LED).
- Adjust the volume on Ai61 as well as the source device.
Bluetooth® Pairing
-
Press the Control Knob to select the Bluetooth® input (Blue LED).
-
Pair to “Fluance Ai61” on your source device. Note: The unit will attempt to auto-pair to the last paired device.
-
Use the Remote to control playback on your source device.
Note: Adjust the Volume on the source device as well as the Ai61. -
If your device cannot find “Fluance Ai61”, you can reset the Bluetooth® pairing.
• Press and hold **** on the Remote for 3 seconds to reset Bluetooth® pairing.
OR
• Press the Bluetooth® Pairing Reset Button on the back of the unit.
Note: How you access your device’s Bluetooth® settings may vary from one manufacturer to another. The maximum line of sight for Bluetooth® range is 33ft. Obstacles may decrease transmission distance.
Optical Input
-
Connect the Optical cable to your source device (TV, Computer, Game Console…).
Ensure protective caps are removed from the ends of the Optical cable. -
Connect the other end of the Optical cable to the back of the Active Speaker.
-
Press the Control Knob to select the Optical Input (White LED).
-
Adjust the volume on Ai61 as well as the source device.
Optical Audio Signal Compatibility
The Ai61 does not support Dolby Digital Audio or DTS Audio. Locate the audio
output settings on your source device and ensure Dolby Digital is turned off.
The correct audio output setting is commonly referred to as PCM or Stereo.
Some TVs also require that audio output be enabled. This setting may be
referred to as External Speakers. Ensure this is selected as your
speaker/audio output.
For instructions on a specific device, please consult the device’s user
manual.
USB Input
- Connect the USB cable to your source device (Laptop, Desktop…).
- Connect the other end of the USB cable to the USB C port on the back of the Active Speaker.
IMPORTANT: The USB input on the Ai61 is for USB audio playback and not for USB charging. - Press the Control Knob to select the USB Input (Purple LED).
- Adjust the volume on Ai61 as well as the source device. You may also need to adjust the volume in the different programs on the source device.
USB Audio Output Settings
You may need to enable USB audio output on your source device. Here are the
directions for most Windows Computers.
Windows® and Apple® : Control Panel > Sound > USB Audio Apple® : System
Preferences > Sound > Output > USB
It is also important to check that any sound enhancements, effects, or EQ
settings are disabled® on your source device.
Subwoofer Output
IMPORTANT: When a subwoofer cable is connected, the Ai61 will
automatically cut frequencies below 80Hz to optimize performance. The
subwoofer cable must be removed to resume full-frequency playback.
- Connect the Subwoofer cable to your powered subwoofer.
- Connect the other end of the Subwoofer cable to the back of the Active Speaker.
- Adjust the volume on the Subwoofer for the best listening experience.
Fluance offers matching subwoofers for the ultimate audio experience. For more information visit: www.Fluance.com/subwoofer.
Frequently Asked Questions
What is “auto-pairing” and how does it work?****
– Auto-pairing is a convenient connection feature included in all Fluance
Bluetooth® Speakers.
– If the connected Bluetooth® -enabled device leaves the connection range of
the Ai61 and returns at a later time, the device will automatically connect.
If the device’s Bluetooth® function is disabled and then enabled at a later
time, the device will automatically connect as well.
*Note: The Fluance Ai61 will only auto-pair to the last device that it was connected to.
– Another device is connected to my Fluance Ai61 and I want to connect my
device.
– You can reset any Bluetooth® connection by pressing the Bluetooth® Pairing
Reset button on the back of the Active Speaker. You can also press and hold
“Play/Pause” on the Remote for 3 seconds.
How can I increase the volume when using the Ai61 with a turntable?****
– If turntable audio is too quiet you may need to add a preamplifier. Some turntables have built-in preamps that can be turned on or off. The Fluance PA10 preamplifier is a great match for Fluance-powered speakers and turntables.
Why is the volume from each input different on the Ai61?****
– Ensure that any volume and EQ settings on your source devices are set to
similar levels. The different signal types used by each input mean they are
processed differently by the Ai61.
– The Optical Input uses a digital signal while the RCA Input uses an analog
signal. These differences can result in slight variances in the output volume
of the Ai61.
Why is the volume from each input different on the Ai61?****
– Ensure that any volume and EQ settings on your source devices are set to
similar levels. The different signal types used by each input mean they are
processed differently by the Ai61.
– The Optical Input uses a digital signal while the RCA Input uses an analog
signal. These differences can result in slight variances in the output volume
of the Ai61.
Certification Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Warranty Information
Thank you for choosing Fluance! We guarantee your investment in our products
is a solid one. High-performance components combined with quality
craftsmanship allow us to maintain the highest possible production standards.
All items are guaranteed against defects in materials and craftsmanship.
Fluance has outstanding quality control; if something should go wrong with any
of our products, we will repair it free of charge within the warranty period.
If the product cannot be repaired, we will replace the product. If the product
has been discontinued, we will replace the product with either the newest
version of said product or its current equivalent. In the event that Fluance
replaces a product under warranty, the replacement would only carry the
original warranty from the original date of purchase.
Warranty Period
The Fluance products below are warrantied for parts and labor for the stated
period from the date of original purchase and are subject to the terms and
conditions of the warranty. Any refurbished products that are discontinued
hold a 90-day warranty from the date of original purchase. Fluance warranties
are valid for the original owner and are non-transferable.
Home Audio Passive Speakers: Lifetime Warranty
Active/Powered Speakers: Two-Year Warranty
HiFi Turntables: Two-Year Warranty
Batteries (For Powered Speakers): One-Year Warranty
Warranty Exclusions
- Products purchased from a dealer not authorized by Fluance.
- Products with the serial number defaced, altered, or missing.
- Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect, unauthorized modification or water damage.
- Defect or damage as a result of repairs performed by a person or party not authorized by Fluance.
- Defects of damage occurring during shipping (claims should be made with the shipping company).
- Defect or damage as a result of connecting a product to an outlet with the incorrect voltage. Voltage converters must be used where applicable.
- Consumable parts include, but are not limited to, batteries, styli, and rubber belts.
To Obtain Warranty Service
Should your product require warranty service, please contact us at
www.fluance.com/contact or call us at
1-888-617-6863 to set up a Return
Authorization. Products returned without a valid Return Authorization number
will be refused.
Fluance products must be returned in their original packaging. Our products
are packaged specially to protect them from any damage during shipping, and
without this packaging, the return shipment could get damaged.
This warranty does not cover the shipping cost, insurance, or any other
incidental charges. Products shipped for warranty service must be pre-paid by
the customer, and Fluance will cover the cost to ship the repaired or replaced
product back to the customer.
Thank you for your purchase of this Fluance® product.
We hope you enjoy your experience.
Questions?
Give us a chance to help, we’re just a click away.
| | |
---|---|---|---
Fluance.com/resources|
Fluance.com/support|
Fluance.com/videos|
Fluance.com/contact
Don’t forget to register your product with us!
Fluance.com/registration
References
- Fluance Support Center
- Register your product | Fluance
- Fluance Support Center
- Fluance Support Center
- Fluance Support Center
- Powered Subwoofers | Fluance
- Fluance Support Center