Fluance X870BR Surround Sound Home Theater User Manual
- June 13, 2024
- FLUANCE
Table of Contents
Fluance X870BR Surround Sound Home Theater
Introduction
When it comes to elevating your home entertainment experience to cinematic levels, the Fluance X870BR Surround Sound Home Theater is the ultimate choice. Crafted by the renowned brand Fluance, this 7.0 speaker system has been meticulously engineered to redefine your perception of sound, delivering an audio experience that transcends ordinary home theater setups. Let’s dive into the details and discover why this system stands out.
Speaker Configuration
- Floorstanding Main Speakers (pair):
- Speaker Configuration: 3 Way – 4 Driver
- Tweeter: 1-inch Neodymium Balanced Silk Dome Ferrofluid Cooled
- Midrange: Dual 6.5-inch Woven Glass Fiber Composite Drivers with Butyl Rubber Surrounds
- Woofer: Isolated Down-firing 8-inch Polymer Treated High Excursion Driver with Butyl Rubber Surround
- Power Handling: 80 – 160 Watts RMS
- Frequency Response: 35Hz – 25KHz
- Sensitivity: 87dB @ 1W / 1m
- Crossover Frequency: 100/3000 Hz Phase Coherent – PCB Mounted Circuitry
- Impedance: 8 Ohm Compatible
- Enclosure: Tuned Rear Dual Port Bass Reflex Tower Design Dampened
- Center Channel Speaker:
- Speaker Configuration: 2 Way – 3 Driver Center Channel
- Tweeter: 1-inch Neodymium Balanced Silk Dome Ferrofluid Cooled
- Woofer: Dual 5.25-inch Woven Glass Fiber Composite Drivers with Butyl Rubber Surrounds
- Power Handling: 50 – 100 Watts RMS
- Frequency Response: 110Hz – 20KHz
- Sensitivity: 86dB @ 1W / 1m
- Crossover Frequency: 3000 Hz Phase Coherent – PCB Mounted Circuitry
- Impedance: 8 Ohm Compatible
- Enclosure: Acoustic Suspension Design
- Bookshelf and Surround Speakers (pair):
- Speaker Configuration: 2 Way – 2 Driver Surround Speakers (Wall Mountable)
- Tweeter: 1-inch Neodymium Balanced Silk Dome Ferrofluid Cooled
- Woofer: 5.25-inch woven Glass Fiber Composite Drivers with Butyl Rubber Surrounds
- Power Handling: 80 – 160 Watts RMS
- Frequency Response: 35Hz – 25KHz
- Sensitivity: 87dB @ 1W / 1m
- Crossover Frequency: 3100 Hz Phase Coherent – PCB Mounted Circuitry
- Impedance: 8 Ohm Compatible
- Enclosure: Vented Bass-reflex Design
General Specifications
- Maximum Output Power: 200 Watts (per speaker)
- Product Dimensions (each floor-standing speaker): 12.99 x 9.25 x 45.86 inches
- Item Weight (each floor-standing speaker): 177.3 pounds
- Connectivity Technology: XLR
- Recommended Uses For Product: Music, Home Theater, Musical
- Subwoofer Diameter: 8 Inches
Box Contents
- Floorstanding Speakers (Pair)
- Center Channel Speaker
- Bookshelf and Surround Speakers (Pair)
- Speaker Cables
- Owner’s Manual
- Warranty Information
- Speaker Grilles
- Additional Accessories
- Remote Control (if applicable)
- Power Cables
Product Features
The Fluance X870BR Surround Sound Home Theater system boasts a range of impressive features that make it a standout choice for audio enthusiasts and home theater aficionados. Here are the key features of this system:
- Comprehensive 7.0 Speaker System: The Fluance X870BR includes a complete 7.0 speaker system, consisting of floorstanding speakers, a center channel speaker, and bookshelf and surround speakers. This comprehensive setup ensures a fully immersive audio experience for movies, music, and more.
- Dynamic Floorstanding Speakers: The floor-standing speakers feature a unique down-firing 8-inch woofer, neodymium silk dome tweeters, and dual 6.5-inch woven fiber midrange drivers. These components work together to deliver powerful and precise audio performance.
- Exquisite Bookshelf Surrounds: The bookshelf surround speakers offer outstanding clarity and immersive sound reproduction. They are as impactful as tower speakers, making them suitable for use as front channels or surrounds.
- Detailed Center Channel: The center channel speaker is designed to reproduce dialogue with exceptional clarity. It ensures accurate reproduction of dialogue and clear musical vocals, enhancing the overall audio experience.
- Precise Bass Extension: The system utilizes down-firing 8-inch subwoofers that produce deep and undistorted bass responses. This results in a lively and full-range performance, elevating your audio immersion.
- Elegantly Expressive Mid-Range: Woven fiber drivers provide improved vibrational damping and optimal linear movement. This translates to a faithful reproduction of the original recording, immersing you in sound with outstanding accuracy.
- Captivating Highs: Premium neodymium silk dome tweeters generate crisp and natural high frequencies. They offer spacious off-axis dispersion, allowing you to enjoy beautifully expressed highs from anywhere in the room.
- Superior Cabinet Engineering: The acoustically inert wood cabinets are meticulously designed with rigid internal bracing. This design prevents unwanted resonance and ensures that sound waves are isolated, eliminating acoustic interference. Dual rear ports in the woofer enclosures provide controlled low-frequency responses.
- Passive Speaker System: The Fluance X870BR is a passive speaker system, which means it requires an external amplifier or AV receiver to power the speakers. This allows users to customize their audio setup according to their preferences.
- Premium Components: The system is built with premium components and expert audio engineering to deliver exceptional sound quality. It’s a testament to Fluance’s commitment to providing audiophiles with a superior audio experience.
- Multiple Speaker Configurations: With floor-standing, bookshelf, and surround speakers, the system offers flexibility in speaker placement, allowing you to customize your home theater setup to suit your room and preferences.
- XLR Connectivity: The system features XLR connectivity, which is known for its high-quality, balanced audio transmission. This ensures clean and interference-free audio signals.
Product Usage Instructions
Unboxing and Setup:
- Carefully unbox each speaker and the necessary accessories.
- Assemble the floor-standing speakers, if required, following the provided instructions.
- Place the floor-standing speakers in the desired locations within your room. Ensure they are stable and not block any vents or passages.
- Position the center channel speaker near or below your TV or projection screen, ensuring it’s centered.
- Install the bookshelf and surround speakers in appropriate locations. Wall-mount them if needed, following the manufacturer’s instructions.
Connecting the Speakers:
- Connect each speaker to your AV receiver or amplifier using appropriate speaker cables. Ensure that you connect the correct terminals (positive to positive, negative to negative).
- Use XLR cables for connecting to your AV receiver or amplifier if your equipment supports XLR connectivity.
- Connect the speaker wires to the corresponding terminals on your AV receiver or amplifier.
Connecting the AV Receiver or Amplifier:
- Connect your AV receiver or amplifier to your audio source, such as a TV, Blu-ray player, game console, or streaming device, using the appropriate audio cables (HDMI, optical, coaxial, RCA, etc.).
- Make sure all connections are secure and properly seated.
Powering On:
- Turn on your AV receiver or amplifier.
- Turn on your audio source (e.g., TV, Blu-ray player).
- Use the AV receiver’s remote control or front panel to select the appropriate input source (e.g., HDMI, optical, analog) for the audio signal.
Adjusting Settings:
- Access the settings menu on your AV receiver or amplifier to configure audio settings such as speaker size, distance, and crossover frequencies. Follow your receiver’s user manual for specific instructions.
- You can also adjust individual speaker settings to fine-tune the audio experience, including levels and tone controls.
Testing the System:
- Play audio or video content on your source device to test the system.
- Ensure that sound is coming from all speakers, and that the center channel reproduces dialogue clearly.
- Use the AV receiver’s remote control to adjust the volume and audio settings as needed.
Enjoying Your Home Theater:
- Once your Fluance X870BR Surround Sound Home Theater system is set up and configured, you can sit back and enjoy immersive audio for movies, music, and more.
- Experiment with different audio sources and content to fully experience the system’s capabilities.
Regular Maintenance
- Occasionally check the speaker connections and cables to ensure they are secure.
- Keep the speakers and receiver clean and free from dust.
- Refer to the user manuals for both the Fluance speakers and your AV receiver or amplifier for maintenance and troubleshooting tips.
Troubleshooting
Troubleshooting audio issues with the Fluance X870BR Surround Sound Home Theater system can help you identify and resolve any problems you may encounter. Here are some common troubleshooting steps to address potential issues:
No Sound or Low Volume:
- Check that all speakers are connected securely to your AV receiver or amplifier.
- Ensure that the speaker wires are properly connected with the correct polarity (positive to positive, negative to negative).
- Verify that the AV receiver or amplifier is powered on and set to the correct input source.
- Adjust the volume level on both the AV receiver and the source device (e.g., TV, Blu-ray player).
- Inspect the speaker cables for any damage or loose connections.
Imbalanced Sound:
- Check the speaker levels in your AV receiver’s settings menu. Adjust the individual speaker levels to balance the sound.
- Ensure that the speaker placement is correct and that speakers are not obstructed by objects or walls, which can affect sound distribution.
No Dialogue or Poor Dialogue Clarity:
- Verify that the center channel speaker is correctly connected and positioned.
- Adjust the center channel level in your AV receiver’s settings to enhance dialogue clarity.
- Ensure that the audio source you are using is delivering clear dialogue.
Distorted Sound or Speaker Buzzing:
- Check for loose or damaged speaker wire connections. Reconnect or replace wires as needed.
- Ensure that the speaker cables are not touching each other or any metal surfaces, which can cause interference.
- Inspect the speaker cones for damage or obstructions.
No Bass or Weak Bass Response:
- Confirm that the subwoofer is properly connected to your AV receiver and powered on.
- Check the subwoofer’s volume and crossover settings. Adjust them to suit your preferences.
- Ensure that the subwoofer is placed in an optimal location to maximize bass performance.
No Audio from Specific Speakers:
- Confirm that the speaker wires for the affected speakers are securely connected to both the speaker terminals and the AV receiver.
- Test the affected speakers by connecting them to a different channel on the AV receiver to determine if the issue is with the speaker or the receiver.
Remote Control Issues:
- Check the batteries in your AV receiver’s remote control and replace them if necessary.
- Ensure that there is a clear line of sight between the remote control and the AV receiver’s sensor.
- If the remote control doesn’t respond, try resetting or reprogramming it according to the receiver’s user manual.
Audio Dropouts or Interruptions:
- Verify that all cables, including HDMI, optical, or analog connections, are securely connected to both the source device and the AV receiver.
- Check if there are any firmware updates available for your AV receiver or source devices, and install them if necessary.
- Interference from nearby electronic devices or wireless networks can cause audio dropouts. Move such devices away from your audio setup.
No Power or Won’t Turn On:
- Check the power source and ensure that the AV receiver or amplifier is plugged in and turned on.
- Inspect the power cable for any damage.
- Verify that the power outlet is functional by testing it with another device.
Check for Faulty Equipment:
- If you’ve exhausted all troubleshooting steps and are still experiencing issues, it’s possible that there may be a problem with one of the components, such as a speaker or the AV receiver. Contact Fluance customer support or the manufacturer of your AV receiver for further assistance and potential warranty service.
FAQs
How do I connect the speakers to my AV receiver or amplifier?
To connect the speakers, use the provided speaker cables and connect them to the corresponding terminals on your AV receiver or amplifier. Ensure that you match the positive (+) and negative (-) terminals correctly.
Do I need a separate subwoofer for this system?
The Fluance X870BR system includes floorstanding speakers that offer deep bass response. However, for even more powerful bass, you can optionally add a subwoofer to your setup.
Can I wall-mount the bookshelf and surround speakers?
Yes, the bookshelf and surround speakers are often designed to be wall- mounted. Refer to the user manual for specific instructions on wall-mounting and the necessary hardware.
What type of AV receiver or amplifier do I need for this system?
You will need an AV receiver or amplifier that matches the system's impedance and power requirements. Refer to the speaker specifications and consult the receiver's manual for compatibility.
How do I optimize the speaker placement for the best sound quality?
Follow the guidelines provided in the user manual for speaker placement. Typically, floorstanding speakers should be positioned at the front, the center channel below or near the TV, and the bookshelf/surround speakers at the sides or rear of the room. Experiment with placement to find the optimal configuration.
Can I use these speakers with my TV, Blu-ray player, and other audio sources?
Yes, you can use the Fluance X870BR system with various audio sources, including TVs, Blu-ray players, game consoles, and more. Simply connect the speakers to your AV receiver or amplifier, and then connect the receiver to your audio sources.
How can I control the volume and settings of the system?
You can control the volume and audio settings using your AV receiver or amplifier's remote control or front panel. The AV receiver is the central control point for adjusting settings, such as volume, EQ, and speaker levels.
Do I need any additional accessories or cables to set up the system?
In addition to the included speaker cables, you may need audio cables (HDMI, optical, RCA, etc.) to connect your AV receiver to your audio sources. The specific cables required depend on your setup.
How can I fine-tune the audio settings for the best sound quality?
Refer to your AV receiver's manual for instructions on adjusting audio settings, such as speaker levels, crossover frequencies, and EQ settings. Experiment with these settings to achieve the desired audio experience.
Can I use this speaker system for both movies and music?
Yes, the Fluance X870BR system is versatile and suitable for both movies and music. It provides a high-quality audio experience for various types of content.
What is the recommended room size for this speaker system?
While the system can work in various room sizes, it's essential to consider the dimensions of your space. Larger rooms may benefit from additional subwoofers for enhanced bass response.
Are speaker stands included for the bookshelf speakers?
Speaker stands are typically not included with bookshelf speakers. If you prefer to place the bookshelf speakers at ear level, you may need to purchase compatible stands separately.