iHOME 2IHCM0840 15W Magnetic Car Wireless Charger Instructions
- June 13, 2024
- iHome
Table of Contents
2IHCM0840 15W Magnetic Car Wireless Charger
15W Magnetic Car Wireless Charger
Model: 2IHCM0840
Product diagram:
- Magnetic wireless car charger
- Nut
- Clamp
- Cable
Package Contents
- 15W wireless charger
- Nut
- Clamp
- USB to Type C charging cable
- User Manual
Instructions for Wireless charger
- Connect the adapter to the charging cable, and connect to the wireless charger. The blue and red light will be flash, then it will be off.
- Put products that meet the Qi standard (such as mobile phones, etc.) on the center of the wireless charger, and the wireless charger will charge the product. When charging, the blue light stays on.
- When remove the mobile phone from the wireless charger, the blue light will be off.
- When put a mobile phone without wireless charging function (for example iPhone 7 plus), or a coin on the wireless charger, the red light will flash to indicate the FOD status.
Product Specifications
Input: DC 5V/2A, 9V 2A,
Charging efficiency: 73%
Charging distance: 3-10MM
Frequency: 110.1-205 KHz
Wireless charging power: 15W Max
Product size: 9.4 6.3 0.8 CM
Product material: PC+ aluminium alloy+ magnet
Charging interface type: USB to Type C cable
Charging cable length: 100cm
Safety precautions
- This product is only suitable for charging mobile phones and electronic products that meet the Qi standard, please do not use it for other purposes;
- Please disassemble the product without permission
- Please place the device in a ventilated place, and avoid high temperature or direct sunlight
- Children are not allowed to use this product alone. they should use this product under the supervision of a guardian
- It needs to be waterproof during maintenance and keep the equipment in a power-off state.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>