TERWOK B09RGW6XY5 LED Rechargeable Headlamp Instruction Manual
- June 13, 2024
- TERWOK
Table of Contents
TERWOK B09RGW6XY5 LED Rechargeable Headlamp Instruction Manual
PRODUCT PARAMETERS
- WATERPROOF CLASS IPX4
- DROP RESISTANCE (MAX HEIGHT 2M)
- 3.7V 1200 MAH LITHIUM-POLYMER BATTERY
- WORKING TIME UP TO 8 HOURS
- COB AND XPE LEDS WITH HIGH EFFICIENCY
- MAXIMUM BRIGHTNESS-350 LUMENS
- MAXIMUM BEAM ANGLE-230°
- ABILITY TO CONTROL WITH A MOTION SENSOR
- 230° FULL VISION LIGHTING DESIGN
- WAVE HAND INDUCTION
MATTERS NEEDING ATTENTION
- Charge only with charging cable provided by manufacturer
- Do not use while charging
- Do not charge near flammable items or liquids
- Do not charge inside an automobile even when parked
- Do not leave product inside hot car or garage where temps may exceed 140F /60C
- Do not charge overnight,3 hours of charging is sufficient
- Do not over-discharge or exceed the continuous discharge rating
- Do not throw away in trash;contact your local jurisdiction for proper recycling or disposa
INSTRUCTIONS FOR USE:
- POWER BUTTON
- INDUCTION BUTTON
- PRESS THE POWER BUTTON TO TURN ON THE COB HEADLAMP 100% LIGHTING FUNCTION
- PRESS THE POWER BUTTON AGAIN TO SWITCH TO 40% LIGHTING FUNCTION
- PRESS THE POWER BUTTON AGAIN TO TURN ONTHE XPE SIDE LIGHT 100% LIGHTING FUNCTION
- PRESS THE POWER BUTTON AGAIN TO SWITCH TO 40% LIGHTING FUNCTION
- PRESS THE POWER BUTTON AGAIN TO TURN OFF
- PRESS THE POWER BUTTON AND THE INDUCTION BUTTON FOR 2 SECONDS AT THE SAME TIME TO TURN ON THE BLINKING FUNCTION INDUCTION MODE. IN THIS MODE, YOU CAN WAVE YOUR HAND
- TO TURN ON OR TURN OFF THE LIGHT THE SENSOR AREA IS NEAR THE INDUCTION BUTTON
LIGHTING +BATTERY PACK DESCRIPTION
-
COB high brightness
-
COB low brightness
-
Strobe light
-
XPE high brightness
-
XPE low brightness
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>