SZELAM 6633 LED Digital Clock Instruction Manual

SZELAM 6633 LED Digital Clock

Application: DS-6633

Main Functions

1. Temperature, time, week and date are displayed on the same screen
2. Chinese/English display: Chinese calendar can be displayed in Chinese mode
3. Brightness mode adjustable:
4. Ten-speed automatic light sensitivity,
5. Ten-speed manual brightness adjustment,
6. Display can be turned off
7. Memory mode: power off memory
8. Alarm function: two groups of alarms with single/double break/daily alarm
9. Time counting and countdown functions: up to 99 minutes and 59 seconds

Comprehensive Settings

1. Language Selection: short press” ” to select language. Data display “ ” in Chinese, display in English.

2. General Settings:
   

3. Display Mode Settings: in Chinese mode, short press” “to switch display mode,

4. show Gregorian calendar only,

5. show Chinese calendar only,

6. Gregorian/Chinese calendar cycle display.Press” ” in English mode and the function is null.

7. Brightness Mode Settings: short press ” ” to switch manual automatic brightness adjustment, in automatic mode display in manual mode display last brightness . Press to adjust, press  “ ” to exist.

Alarm Settings

1. Switch alarm: tap ” ” to display,    respectively represent 1/2 groups of alarm clocks. Press ” ” to turn on/off threlated clock. ” ” means the first alarm clock, the corresponding alarm clock icon lights up” ” Press” ” to setup the alarm clock .
   

2. Turn off alarm: when the alarm sounds, press any key to turn off the alarm and enter the next alarm state.

Timing Settings

Timing up:
short press “ “, display , press “ ” to start timing, press “ ” again to stop, such a cycle.  minutes seconds
Long press “ ” to clear exit and return to time status.

Countdown :
short press “ ” , display press them “‘0-9″” numeric keys to enter the countdown time (for minutes seconds
Example: enter “‘1058″‘ in 10 minutes and 58 seconds), press” “to start countdown, press again “ ” to stop, such a cycle. Long press” ” to clear exit and return to t ime status.

Other Settings

1.  In setting mode:
   press” ” to change the numbers, or enter the number keys, press” loKI”to save and exist setting, if no operation for 3 seconds, save and exits automaticlly.

2. Buttons on the back of alarm clock: short press of the four buttons has the same function as the remote control. Long press ” “to switch manual/automatic brightness adjustment, long press ” ” to switch Chinese/English display.

3. “ ” : Turn on/off display, time goes on even if the display is turned off.

4. Daylight saving time: Long press “.” to turn on/off daylight saving time and display/off the “DST” icon.

Note: The clock must be plugged in to display. The battery is only used for memory functions. If the power cuts off, the system will enable the backup battery to keep normal timing , no need to reset the time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>