MAKhellfire 1052221 Rifle Scopes Owner’s Manual
- June 13, 2024
- MAKhellfire
Table of Contents
MAKhellfire 1052221 Rifle Scopes
Parts of MAKhellfire
| 1 | Rear actively lit up aiming mar |
|---|---|
| 2 | Dovetail rail (steel) |
| 3 | Two tactile Push-Buttons |
| 4 | High intensity Micro projector |
| 5 | Front aiming mark, illuminated |
| 6 | Battery CR1632 |
Please Read This Entire Handbook Before Attaching Your MAKhellfire
Always check and be certain that the firearm is
unloaded before undertaking any work upon it
- Remove your pistols front sight with the remover tool.
- Place your MA Khell fire front sight in the front notch and firmly tighten the screw (or fit it in the front notch) until the system is locked and secure.
- Remove the stock rear sight with a remover tool.
- Install your MAKhellfire rear sight onto pistol slide and firmly tighten the screws (or fit it in the rear notch)
- Make sure every part of MAKhellfire is tight and secure.
If a bore sighting collimator or any other bore obstructing device was used,
it must be removed before proceeding. An obstruction can cause serious damage
to the gun and possible injury to yourself and others nearby.
How to Attach Your MAKhellfire
Your MAKhellfire sight is custom-designed for specific gun types as specified
on the unique serial number sticker on the packaging. In case the packaging is
not in hand, you may contact MAK Customer Service with the serial number
marked on the product to receive information on the matching gun types:
kilic@mak.ag
Features of MAKhellfire
Before attaching to weapons, check the regional legal regulations in the area
of application. The attachment to a weapon is always the sole responsibility
of the user
Select color: Push both buttons simultaneously 3 times to change between Red
and Green color
Adjust illumination: Push up/down buttons to select one of 7 intensity levels
MAKhellfire’s rear sight can be mounted before or after assembly of your
pistol
Make sure that no section of MAKhellfire blocks the operation of the action. Avoid over-tightening the screws. This can damage the MAKhellfire, affecting performance or rendering it inoperable.
Manual-Mode (default after battery change )
- Press any button to turn your MAKhellfire ON
- Press any button 3 seconds to turn your MAKhellfire OFF
- Press left (up) button to INCREASE INTENSITY
- Press right (down) button to DECREASE INTENSITY
Your MAKhellfire comes in Manual-mode as factory preset.
In Auto-Mode, MAKhellfire falls asleep after 2 minutes if no motion is detected In Manual-Mode MAKhellfire switches off after 20 minutes if no motion is detected.
Auto-Mode (needs activation)
- Auto-Mode can be activated by holding both buttons until LED indicators are starting to blink.
- Blinking 5 times indicates that the system is on Auto-Mode.
- Blinking 2 times indicates that the system is on Manual-Mode.
- In Auto-Mode, the system falls asleep after 2 minutes and wakes up by movement.
- While asleep, the system does not draw energy from the battery (Zero-Energy consumption technology)
Emergency-OFF mode
- Press and hold one button, and press the other button at the same time to force-switch OFF the illumination when in Auto-Mode.
- Press any button to switch your MAKhellfire back ON in Auto-Mode.
CONTACT OUR CUSTOMER SERVICE DEPARTMENT:
Tel.: +49 9723 93805-0
Fax: +49 9723 93805-129
CONTACT OUR CUSTOMER SERVICE DEPARTMENT VIA
THE INTERNET:
****kilic@mak.ag
https://www.mak.ag
Customer Satisfaction Survey
Your opinion matters for us.
https://www.surveymonkey.de/r/VF38
Environmental notice The symbol represents the need of separate disposal of
the product and accessories. They should not be dumped with regular household
waste but must be returned to a recycling collection point for electrical
devices. Recycling helps reduce the consumption of raw materials.
All parts labelled with symbol are valuable for recovery. For more information
regarding this matter, contact our company or nearest recycling center. Please
also dispose packaging with regarding to your area’s environmental
regulations.
Warranty Form
If you experience any problems with our products return it with this document enclose an explanation of the problem.
References
- MAK- Rifle Scopes | Mounts | Optics | Electronics
- MAK- Rifle Scopes | Mounts | Optics | Electronics
- MAKhellfire Customer Satisfaction Survey
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>