McIntosh RS150 Wireless Loudspeaker System User Guide
- June 6, 2024
- McIntosh
Table of Contents
RS150 Wireless Loudspeaker System
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699
Phone: 607-723-3512
www.mcintoshlabs.com
RS150
Wireless Loudspeaker System Owner’s Manual
Quick Start
is on page 4
Safety First
It is a smart idea to read all the enclosed RS150 SAFETY INFORMATION included
in separate documents; even if you already know this stuff, you can’t be too
safe.
Here is some compliance information:
FCC Information (For US Customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets FCC requirements. Modification not expressly approved by
McIntosh may void your authority, granted by the FCC, to use the product.
2. CAUTION: · To comply with FCC RF exposure compliance requirement,
separation distance of at least 20cm must be maintained between this product
and all persons. · This product and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
3. COMPLIANCE INFORMATION: · Product Name: RS150 Wireless Loudspeaker System
· Model Number: RS150 · This product contains FCC ID:2AJYB-S810 McIntosh
Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 Tel.
607-723-3512
IC Information (Canadian Customers)
1. PRODUCT: This product contains IC: 20504-S810
This product complies with RSS-210 of Industry Canada. Operation is subject to
the following two conditions:
(1) this product may not cause harmful interference, and (2) this product must
accept any interference received, including interference that may cause
undesired operation. This Class B digital Apparatus complies with Canadian
ICES-003.
2. CAUTION:
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
Informations sur IC (pour les clients Canadiens)
1. APPAREIL:
Cet Appareil contiens IC: 20504-S810.
Cet Appareil est conforme à la norme CNR-210 du Canada. L’utilisation de ce
dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne
doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être
prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le fonctionnement du dispositif. Cet Appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
2. ATTENTION:
Afin de réduire le risque d’interférence aux autres utilisateurs, il faut
choisir le type d’antenne et son gain de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour
l’obtention d’une communication satisfaisante.
Canadian Customers: CAN ICES-003 (B)/NMB003 (B)
RF Exposure Information
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption ratio (SAR).
Cet équipement est conforme aux normes d’exposition aux radiations FCC/IC
définies pour un environnement non contrôlé et satisfait les directives
d’exposition à la radiofréquence (RF) dans le supplément C des OET65 et
RSS-102 des règles d’exposition à la fréquence radio (RF) IC. Cet équipement a
de très faibles niveaux d’énergie RF qui sont jugés conformes sans test de
taux d’absorption spécifique (SAR).
RED (EN) Information
1.DECLARATION OF CONFORMITY Our products follow the provisions of EC/EU
directives: LVD: 2014/35/EU EMC: 2014/30/EU RED: 2014/53/EU ERP: EC regulation
1275/2008 and its frame work directive 2009/125/EU RoHS: 2015/863/EU
2. IMPORTANT NOTICE: DO NOT MODIFY
THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets RED directive requirements. Modification of the product
could result in hazardous Radio and EMC radiation.
3. CAUTION:
Separation distance of at least 20cm must be maintained between this product
and all persons.
This product and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
2
Table of Contents
Safety First…………………………………………………….2 FCC Information (For US Customers) ………………2
IC Information (Canadian Customers) ………………2 Thank you from all of us at
McIntosh ……………….3 Make a Note…………………………………………………..3 Trademark and License
Information …………………4 Quick Start (Bluetooth) …………………………………..4 More
Connections…………………………………………..5
AirPlay 2 …………………………………………………. 5 Wi-Fi connection using an iOS Device ……….. 5
Ethernet…………………………………………………… 5 Setting up Wi-Fi Without Ethernet……………… 5
Chromecast ……………………………………………… 5 Note About Initial Network Connection………. 6
Roon……………………………………………………….. 6 Tidal Connect…………………………………………… 6 Spotify Connect
……………………………………….. 6 Qualcomm® aptXTM Audio……………………….. 6 Front View Labeled
………………………………………7 Installing the Grille ………………………………………..7 The Knobs and LEDs
on the Front……………………8 The Right Knob ……………………………………….. 8 The Left Knob
…………………………………………. 8 Network/Wi-Fi Indicator LED ………………….. 8 Automatic Input
Select ……………………………… 8 Sleep Mode LED………………………………………. 8 Input
Indicators………………………………………… 8 Rear View Labeled …………………………………………9 Rear
Connections……………………………………………9 Ethernet Port ……………………………………………. 9 AC Connector
………………………………………….. 9 USB Service Port……………………………………… 9 The Browser Interface
…………………………………..10 OVERVIEW Menu …………………………………..10 SETTINGS Menu
…………………………………….11 UPDATE Menu………………………………………..12
Re-packing the RS150 ……………………………………13 Dimensions ………………………………………………….. 14
Technical Specifications…………………………………15
List of Figures
Figure 1 AC Power Cord………………………………..4 Figure 2 Scan for bluetooth devices
………………..4 Figure 3 Ethernet connection …………………………5 Figure 4 Front View
…………………………………….7 Figure 5 Installing the Grille………………………….7 Figure 6 Rear
View ……………………………………..9 Figure 7 OVERVIEW submenu ……………………10 Figure 8
SETTINGS submenu …………………….. 11 Figure 9 UPDATE submenu…………………………12 Figure 10
Packing Material …………………………13 Figure 11 Dimensions ………………………………… 14
Thank you from all of us at McIntosh
Your new RS150 Wireless Loudspeaker System is a precision instrument that will
provide many years of enjoyment. Please take a few moments to familiarize
yourself with the features and instructions to get the maximum performance
from your equipment. If you need further technical assistance, please contact
your dealer who may be more familiar with your particular setup including
other brands. You can also contact McIntosh with additional questions or in
the unlikely event of needing service.
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903
Technical Assistance Phone:
607-723-3512 Customer Service (for
repairs) Phone: 607-723-3515 Fax:
(607)-724-1917 [email protected] Website: mcintoshlabs.com
Make a Note
For future reference, you can jot down your serial number and purchase
information here. We can identify your purchase from this information if the
occasion should arise. The serial number is located on the back label of the
RS150.
Serial Number:
Purchase Date:
Dealer Name:
3
Trademark and License Information
The McIntosh RS150 incorporates copyright protected technology that is
protected by U.S. patents and other intellectual property rights. The RS150
uses the following Technologies:
Trademark Logo License Information
Use of the Works with Apple badge means that an accessory has been designed to
work specifically with the technology identified in the badge and has been
certified by the developer to meet Apple performance standards. Apple, iPad,
iPad Air, iPad Pro, iPhone and AirPlay are trademarks of Apple Inc.,
registered in the U.S. and other countries. To control this AirPlay 2 enabled
speaker, iOS 11.4 or later is required.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by McIntosh Group, Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance.
Wi-Fi Certification provides assurance that the device has passed the
interoperability test conducted by the Wi-Fi Alliance, a group that certifies
interoperability among wireless LAN devices.
Roon Ready network devices have Roon’s streaming technology built in, and are
certified by Roon Labs to provide the highest level of quality and performance
in network streaming.
Trademark Logo License Information
TIDAL is the first global music streaming service with high fidelity sound,
hi-def video quality, along with expertly curated playlists and original
content — making it a trusted source for music and culture.
The Spotify software is subject to third party licenses found here: https://
developer.spotify.com/esdk-thirdparty-licenses. CONNECT UPDATE Chromecast
built-in is a trademark of Google LLC.
Quick Start (Bluetooth)
Here are the basic steps to start enjoying the RS150 Wireless Loudspeaker
System right away. This Quick Start will get sound flowing from the RS150 via
a Bluetooth connection. That way you can hear some music as you read the rest
of this manual.
· Connect to the RS150 to AC Power. See Figure 1
Figure 1 AC Power Cord
· Power the RS150 On by pressing and releasing the Right Knob
· The BT above the Left Knob will Flash. If it is no longer flashing, press
and hold the Left Knob for two seconds and then release
· On the phone (or other device) you wish to
4
connect, press SCAN in the Bluetooth section of Settings. Generally, this is
found in the Connections’ submenu of settings (devices may vary)
Settings>Connections>Bluetooth · The RS150 will appear as “RS150 xxxx” in
Available Devices. See Figure 2
Figure 2 Scan for bluetooth devices
· Choose the RS150 to pair · When asked to confirm you want to pair the
RS150 to your device, select OK · The RS150 should now be “Connected for
audio” · Play some music
More Connections
AirPlay 2
AirPlay 2 is an Apple technology designed to control home audio systems and
speakers in any room with a tap or by simply asking Siri right from
iPhone, iPad, HomePod or Apple TV.
To control this AirPlay 2-enabled speaker, iOS 11.4 or later is required.
Multiroom Audio
AirPlay 2 technology lets you play a song on every RS150 in your house at the
same time or adjust the volume in any room all in sync.
After installing your RS150, add it to the Apple Home App with a few simple
steps using your iPhone or iPad.
Siri Voice Control
Use Siri on your iPhone, iPad, HomePod, or Apple TV to control your RS150 with
just your voice.
Wi-Fi connection using an iOS Device
Setting up the RS150 as a AirPlay Speaker will connect the RS150 to your Wi-Fi
network:
· Make sure your iOS device is on the Wi-Fi network you wish to connect the
RS150 to
· With the RS150 powered on, the LED below the Left Knob should not be solidly
illuminated green (if it were lit, it would indicate the RS150 is currently
connected to a network)
· Open up Settings on the iOS device · Open up the Wi-Fi submenu · Look at the
Wi-Fi network list and find “Set
Up New AirPlay Speaker”
· Select the RS150 · The RS150 will be added to your network
Ethernet
For a wired connection to your network, use an Ethernet cable to connect the
RS150 to your router. See Figure 3.
Figure 3 Ethernet connection
Note: a solid red Network/Wi-Fi LED indicates that a network error has
occured. See “Network/Wi-Fi Indicator LED” on page 8. Note that plugging in an
ethernet cable will disable the Wi-Fi radio of the RS150. The RS150 will use
the ethernet connection for all network activity. To enable Wi-Fi, the
ethernet cable must be removed. With an ethernet connection, you can use the
RS150 browser interface to provide the RS150 with your Wi-Fi settings. For
more information, see “The Browser Interface” on page 10.
Setting up Wi-Fi Without Ethernet
To initially connect your RS150 to a Wi-Fi network without using an ethernet
connection or iOS connection (as described above) follow these steps:
· Power the RS150 Off and then On · When the green LED below the Left Knob
is blinking, open your PC or phone’s Wi-Fi Connection Settings · Locate the
RS150 in the list of available networks and connect to it. · Open a web
browser (Chrome or Firefox)
· Type 192.168.255.249 in the browser’s address bar and open that page
· Select SETTINGS from the RS150 interface (see Figure 8 on page 11)
· Select Wireless in Network Type
· Select Start Scan
· Select your network · Provide your password and press Connect · Your RS150
will connect to your network
Chromecast
To Cast to your RS150, you will need: · The latest version of Google Home App
· Wireless network and access password
With your mobile device/tablet connected to the same Wi-Fi network as your
RS150 and the RS150 powered on:
· Open the Google Home App · Follow the steps for the RS150 if they
automatically appear
To manually add the RS150
· Tap the + at the top of the screen
· Select “Set up device” · Select “Setup new devices” · Follow the set up
steps for a “Speaker”
Once the RS150 is setup, you can choose to Cast to it. To Cast:
· Choose the Cast button in the top right corner of a Chromecast-enabled app
· Choose the RS150 · When connected the Cast button will change
colors · Cast music, etc. to your RS150
5
Note About Initial Network Connection
When your RS150 connects to your network for the first time, it will
automatically look for the latest software update. If available, the RS150
will install the newest version. When updating, the Red LED below the Right
Knob will blink twice, pause and repeat.
You may adjust how future updates are handled. See “UPDATE Menu” on page 12.
Roon
When connected to your network, the RS150 will be available as a Zone for your Roon server. (If you have a Roon server.) The RS150 can be connected to your Wi-Fi using AirPlay (see “Wi-Fi connection using an iOS Device” on page 5) or Chromecast. It can also be directly connected with an ethernet cable.
Tidal Connect
To listen to music on TIDAL through the RS150, using the Tidal app, select the
content you want to
play and then select the connect icon Now Playing page.
on the
This will bring up a list of nearby devices to stream through. Locate the RS150 and select to pair.
If you are unable to find your device, make sure the device is connected to the same Wi-Fi network you are streaming from.
Once paired you can use your TIDAL app as a remote. TIDAL is compatible with select smart assistants that enable voice controls. Depending on your region, you may enable this feature by linking your TIDAL account with your selected smart device. This option can normally be found in the
Settings section of your respective Smart Devices app.
Spotify Connect
Use your phone, tablet or computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
Qualcomm® aptXTM Audio
aptXTM is a codec that can provide CD quality music over Bluetooth
connections. The RS150 will automatically utilize aptX when connected to a
source that supports aptX. Simply connect with Bluetooth as described in
“Quick Start (Bluetooth)” on page 4.
The RS150 also supports the higher resolution aptX HD (24-bit/48kHz). If your
device utilizes aptX HD then that resolution will be utilized automatically.
The RS150 also features aptX LL (Low Latency) which automatically ensures
Bluetooth can deliver sound in sync with visual media. It reduces delay and
improves end-to-end speed of the audio transmission, resulting in a high
quality, synchronized user experience with any transmitting device that
supports aptX LL.
6
Front View Labeled
Tweeter
Woofer
Input Indicators: Bluetooth Net
Left Knob
Network/Wi-Fi Indicator LED Red/Green LED provides network status information.
See “Network/Wi-Fi Indicator LED” on page 8.
NET
BT
PUSH BT PAIR
-30 -20 -10
-40
0
dB OUTPUT LEVEL
VOLUME
PUSH POWER / MUTE
RS150
Meter
Figure 4 Front View
Installing the Grille
The RS150’s Grille can be installed by lining up the eight plastic pegs on the
back of the Grille with the eight holes framing the speakers of the RS150.
Gently push with even pressure to install and pull straight away from the
front to remove the Grille. See Figure 5 below.
Note that the Grille has a top and bottom. The bottom has a lip that extends
further from the pegs than the top does.
Maximum Volume LED
Right Knob
Figure 5 Installing the Grille
Minimum Volume/ Mute LED Sleep Mode LED
7
The Knobs and LEDs on the Front
The Right Knob
The Right Knob is primarily the Volume and Power Knob.
Command Raise Volume Lower Volume Mute/ Pause Unmute/Play
Adjust Bass Level
Enter Sleep State (power down) Wake from Sleep State (power up)
Right Knob Action
Rotate clockwise
Rotate counter clockwise
Short press (less than half a second)
Short press (less than half a second) or rotate in either direction
Press and Hold while turning clockwise to increase the Bass Level and counter
clockwise to decrease. The Meter will graphically show the level as adjusted.
The midpoint on the meter is considered neutral
Press and Hold for two seconds
Short Press
The Left Knob
The Left Knob can be used to adjust lighting levels and to place the RS150 in Discovery Mode.
Command
Left Knob Action
Adjust Lighting
Press and Hold while turning clockwise to increase the
lighting level and counter clockwise to decrease. The Meter will graphically
show the level as adjusted
Enter Bluetooth Press and Hold for two Discovery Mode seconds
Sleep Mode Lighting
Within two seconds of
entering Sleep State (see “The Right Knob” above), turn the Left Knob to
toggle the Meter Lighting on/off
Network/Wi-Fi Indicator LED
When connected to a network, the Network/WiFi indicator LED will be glow a
solid green. For network states, see the table below:
LED
Green- slow pulse
Green- solid Red- solid Red- slow pulsing
Status
RS150 is in process of joining the network
Connected to the network a network error has occurred
there is a critical firmware issue. Please upgrade firmware
Automatic Input Select
There is no Input Select Knob. Input selection is automatic. There is a
hierarchy of input types. A Wi-Fi connection will take precedence over a
Bluetooth connection. If there is no Wi-Fi connection present, Bluetooth
connection is automatic.
If a Bluetooth connection is interrupted then it must be re-established from
the mobile device.
Sleep Mode LED
The LED will glow red when the RS150 is connected to a live AC outlet and the
unit is in Sleep Mode. When the RS150 receives a power on command, the Sleep
Mode LED will turn off.
Input Indicators
When a network streaming session is active, the NET light will be lit.
When a Bluetooth connection is established, the BT LED will be solidly lit.
The BT flashing indicates that the RS150 is in Bluetooth discovery mode.
8
Rear View Labeled
Serial Number Ethernet Port
LOUDSPEAKER SYSTEM
USB Service Port
Figure 6 Rear View
Acoustic Port For best sound, do not place the RS150 directly against a wall.
Leave a minimum of two inches from the wall to enable the Acoustic Port to
function properly.
AC Connector
Rear Connections Ethernet Port
The Ethernet Port connects your RS150 to your network’s router using a
standard CAT5, CAT5E or CAT6 cable with an RJ45 connector. Using a wired
connection is one way to access the RS150’s setup via a browser. For more
information, see “The Browser Interface” on page 10.
AC Connector
Use the supplied AC Power Cord to connect the RS150 to a live AC outlet.
USB Service Port
The USB port is only for performing service functions by a qualified service
technician. It is not intended for USB device support or playback.
9
The Browser Interface
To view the RS150’s browser interface, you will need its IP address.
There are several ways to find a device’s IP address. For instance, you can
use IP scanner software. Here is one way with out additional software. To find
the RS150’s IP address:
With the RS150 connected to your network with a wired or wireless connection:
· Type the IP address of your router into the address bar of a browser (often
192.168.1.1)
· Enter the router’s Username and password. (The default can be found in the
router’s documentation, but changing it is a good security rule)
· Look for the RS150 in the list of wired or wireless clients for your router
· Note the IP address
With the RS150’s IP address:
· Type the address of the RS150 into the address bar of your router
The RS150 Browser interface has three submenus: · OVERVIEW · SETTINGS · UPDATE
Click on the desired heading to enter that menu.
Figure 7 OVERVIEW submenu
OVERVIEW Menu
SETTINGS Menu
The Overview menu provides the following
information about the RS150: · Serial Number · MAC Address · Network IP
Address · Firmware versions
You can provide a Custom Name for the RS150. This is the name that will
display for available AirPlay devices. If you wish to change the default name,
type the new name in the box and press Enter.
The Overview Menu provides an indicator for the status of your Wi-Fi (WIFI
enabled). When enabled the indicator will show ON and be green. An ethernet
connection takes precedence and will automatically disable Wi-Fi. Wi-Fi, if
set up, will
re-engage when the ethernet cable is disconnected.
The Power Sleep Timer has two settings:
· ON (default)
· OFF
When the Power Sleep Timer is set to ON, the RS150 will power off into a sleep
state after approximately 30 minutes of no sound or user input. After 60
minutes of uninterrupted sleep, the RS150 will enter a Standby Mode. In this
Standby Mode, the Wi-Fi radio is powered off and the unit can not be woken via
the network. Standby Mode power consumption is less than 0.5 watts.
10
Figure 8 SETTINGS submenu
If the Power Sleep Timer is set to OFF, the RS150 will power off into a sleep
state after 30 minutes of non-activity. The RS150 can be woken from sleep by
input from the network (or physically pushing the Power Button). In a sleep
state, the RS150 will continue to work with devices configured to control it
in your Google Home collection.
The RS150 can be made to immediately enter a sleep state by pressing and
holding the Right Knob for two seconds. If Power Sleep Timer is set to ON, the
RS150 will enter Standby Mode after 60 minutes of uninterrupted sleep.
The Startup Volume Limit has two settings: · ON · OFF (default)
When the Startup Volume Limit is ON, upon power loss or return to play from
Sleep or Standby, the first playback of the product will start at a low volume
level. When switched to OFF, the product will resume playback at the last
volume level. The Settings Menu allows you to change settings for Wired and
Wireless network connections.
Select Network Type to see/change settings: · Automatic · Wired · Wireless
If Network Type is set to Automatic, the RS150 will
automatically connect to Wi-Fi when the ethernet cable is unplugged provided
the Wireless connection has previously been setup. Selecting Wired for Network
Type will limit the RS150 network connection to the ethernet port connection.
Select Wireless to setup a Wi-Fi network or to restrict the network connection
to Wi-Fi. If you selected the Network Type of Wireless, the following submenus
appear:
· Scan Networks · Display SSID · Network Password To set up a wireless
connection for the RS150: · Select Start Scan · In the Display SSID submenu,
select a
wireless network using the up/down arrows · Enter the Network Password for
that Network · Select Connect DHCP can be set to ON (Default) or OFF. If you
change this setting to OFF, you will need to provide the following information
manually: · IP · Netmask · Gateway · DNS (1st and 2nd) With DHCP ON, this
information is automatically acquired and the submenus to enter the
information are not visible.
11
Figure 9 UPDATE submenu
UPDATE Menu
The UPDATE menu allows you to reset settings to the factory defaults as well
as update your RS150.
To restore Factory settings, select the “Start Factory Reset” button. Done.
Note that you will lose your Wi-Fi settings.
An alternative method for Factory Reset, is to Press and Hold the Left and
Right Knobs for 10 seconds.
Update Method allows you to set how the RS150 updates its firmware. When set
to the default of OTA Auto, the RS150 will periodically check for updates and
install them automatically. When set to OTA Manual, the RS150 will check for
available updates when you select the Start Search button to the right of
Check for Update. If an update is available, you
can install it by selecting Start Update. (OTA stands for “over-the-air”.)
The Service option for updating is for service purposes by a McIntosh
qualified technician only.
While the RS150 is in the process of updating the firmware, the power status
LED will blink twice in quick succession, pause for 2 seconds, and then repeat
during the entire process.
12
Re-packing the RS150
When shipping the RS150, it is highly recommended that the unit be packed as
it was originally shipped to avoid damage. Failure to properly pack the unit
will likely result in damage. If you need any of the packing material, you can
contact McIntosh Customer Service.
Item QTY Description 1 1 Inner Carton 2 4 Paper Protector 1 3 2 Paper Protector 2 4 1 Accessory Box 5 2 Outer Carton 6 1 Left Foam 7 1 Right Foam
Part # 310761SP 310762SP 310763SP 310764SP 310765SP 310766SP 310767SP
Figure 10 Packing Material 13
Dimensions
7.68″ 19.5cm
14.37″ 36.5cm
NET
BT
PUSH BT PAIR
-30 -20 -10
-40
0
dB OUTPUT LEVEL
VOLUME PUSH
POWER / MUTE
RS150
8.62″ 21.9cm
Figure 11 Dimensions 14
8.9″ 22.6cm
Technical Specifications
Power Output 120W: 30W Tweeter, 90W Woofer
Speakers One 20mm Titanium Dome Fluid-filled Tweeter One 5-1/4 inch Long Throw
Woofer
Crossover Frequencies 2,000Hz
Overall Frequency Range 48Hz to 20,000Hz
Streaming Support Apple AirPlay 2, Google Chromecast, Spotify Connect, Tidal
Connect, Roon
Supported Audio Formats (Must also be supported by chosen source app and
device) MP3, AAC, FLAC, ALAC, WMA, Ogg Vorbis, WAV, M4A, OGG, AIFF
Connectivity Wi-Fi CERTIFIEDTM a, b, g, n, ac WPATM, WPA2TM, WMM® 2.4/5 GHz,
ethernet
Bluetooth 5.0 AVRCP, A2DP, aptX, aptX HD, aptX LL
Power Requirements 100-120V/220-240V ~ 50/60 Hz 150 Watts
Dimensions Width 7 11/16 inches (19.5cm) Height 14 3/8 inches (36.8cm) Depth 8
5/8 inches (21.9cm)
Shipping Carton Dimensions: Width 12 3/4 inches (32.4cm) Height 20 inches
(50.8cm) Depth 14 3/8 inches (36.5cm)
Weight 18.5 pounds (8.4kg) net 24.0 pounds (10.9kg) in shipping carton
15
The continuous improvement of its products is the policy of McIntosh
Laboratory Incorporated who reserve the right to improve design without
notice. The RS150 is designed to employ non-McIntosh-provided services some of
which require separate customer subscriptions and some of which do not, as
part of the Product’s functionality. Because McIntosh cannot control the
providers of such services or the services themselves, the owner of the
Product therefore assumes all risks related to the use of services provided by
anyone other than McIntosh itself. McIntosh cannot and does not warrant
against, and shall have no liability of any kind for any of the following that
are attributable to non-McIntosh providers or services: (i) interruption,
discontinuance, or other unsatisfactory performance of service; (ii) reduced
Product functionality that is so attributable; or (iii) any other loss or
damage of any kind that is so attributable.
McIntosh Part No. 24112001
References
- McIntosh: Home Audio Systems for Music & Home Theater
- Spotify - Connect
- McIntosh: Home Audio Systems for Music & Home Theater