EMEET HS80 Wireless Headset User Manual

EMEET HS80 Wireless Headset

WHAT IS IN THE BOX

Overview

Operation Instructions

Power on/off
Press and hold the power/Bluetooth button for 2 seconds to turn on the device. Press and hold the button for another 2 seconds to turn off the device.

Connection and Pairing 2.1 Connect to a PC

• Insert the EMEET Adapter attached to the device into your PC’s USB port to operate.
• Connect the headset with a USB cable, and insert the other end of the USB cable into your PC’s USB port. The headset serves as a wired one.

Pair with a smartphone

• Press the power/Bluetooth button twice until the indicator flashes blue and a prompt sound is heard from the headset.
• Select “EMEET GeniusCall HS80” from the list of Bluetooth devices to connect with it.

Wearing

• You can wear the headset with the boom on either side (left-right). Pull the boom to the bottom to switch between the left and right channels.
• You can mute or unmute the MIC during a call by moving the boom. (Note: The indicator remains unchanged when the MIC is muted or unmuted)

Charging

• To charge the headset, connect the charging base to a power source through a USB cable, then place the headset on the charging base.
• Connect the headset to a power source through a USB cable. The power indicator blinks green during charging and turns off when the headset is fully charged.
• When the battery’s remaining power is insufficient to support a 10-minute operation, the indicator on the headset blinks red rapidly and turns off 5 seconds later.

Button Operation Instructions

Power/Bluetooth button

| Press and hold for2 seconds| Power on/off
Press twice| Bluetooth pairing starts (with the device on)
Press| Check battery level {with the device on)
Press and hold for 10 seconds| Force restart
Mute/unmute MIC| Press| Mute/unmute MIC (during a call}

Volume+

| Press

Press and hold

| Volume+

Next

Volume•

| Press

Press and hold

| Volume-

Previous

Multifunction Button

| ****

Press

| Answer/switch a call

Play/pause

Press and hold

| Reject a call (when a call comes in)

End a call (during a call}

Rapidly press twice| Call back
Simultaneously press and hold the Volume+ and Volume• buttons for 10 seconds| Reset

LED Indicator

Charging A

| Charging

Fully charged

| Flashes green

Off

Status indicator A| Calling| Steady red

Battery indicator 8

| Low battery| Red for 5 seconds and off
Medium battery| Yellow for 5 seconds and off
High battery| Green for 5 seconds and off
Bluetooth status indicator| Bluetooth pairing| Flash blue
Bluetooth connected| Blue for 5 seconds and flashes

Dongle status C

| Pairing

Connected

| Flash blue

Steady blue

Download Application
Please visit www.emeet.com/EMEETLINK to download the EMEETLINK PC desktop app for software updates and other user- defined operations.
Note: The device can operate normally even if EMEETLINK is not downloaded.

EMEETTwo (2) Year Limited Warranty Limited two (2) Year Warranty with EMEET proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse. To protect your rights, please keep the proof of purchase. For service, please contact us :1 888 959 5320 (EST 9:0oam-5:00pm) support@emeet.com www.emeet.com

Safety Guide
Caution
To avoid electrical shock. do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully_
2. please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product use a dry cloth only
6. Choking hazard – This  It is not suitable for children under the age of 3 ?)Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat
7. Do not use this product if you must remain alert to your surroundings, for example, while driving a car or riding a bike.
8. Do not submerge this product in water or expose it to a damp environment for a long peri<Xl of time. Do not use this product when engaging in water sports, such as swimming or surfing
9. Please protect the power cable and audio cable. Do not step on or apply pressure on them. Do not pull on the product’s plug, socket, or cable outlet
10. It is recommended that users use the accessories that have been specified by the vendor
11. Do not expose the battery to environments with excessive heat such as direct sunlight or sources of fire
12. Connect a power supply within the specified voltage range
13. If a power cable that is connected to the product is not currently being used to charge the product please disconnect the power cable from the port and shut off the power supply.
14. To repair the product please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example. if the power cable or plug is damaged, liquid has flowed into the product an object has fallen into the pr<Xluct the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen

Regulatory Compliance Information

EU/UKCA Compliance
Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. The corporation declares that the radio equipment is in compliance with <Directive 2014/53/EU / RER 2017 (SI 2017/1206)>. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.al/Certifi­cate.html

1. The device has been evaluated to meet general RF exposure requirements The device can be used in portable exposure conditions without restriction.
2. if you use a third-party charger, the recommended output voltage/current of the adaptor is de/1 A., and the adapter shall be CE/UKCA approval type.
3. it is recommended to charge the product In an environment with a temperature that ranges from 5 to 25 t.
4. Caution risk of explosion if the battery is replaced by an Incorrect type. Dispose of used batteries according to the Instructions.
5. Frequency: 2.4GHz (Bluetooth)
6. Maximum Power:: < 1 OOmW
7. The suitable temperature for the product and accessories Is 0-40 t:.
8. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
9. Excessive sound pressure from earphones and headphones can cause hearing loss.

ISED Canada compliance

1. The Class B digital apparatus complies with Canadian ICES-003.
2. This device complies with Industry Canada license-exempt ASS standard(s).
3. 0peration is subject to the following two conditions:
4. this device may not cause interference, and
5. this device must accept any Interference, Including Interference that may cause undesired operation of the device.
   son fonctlonnement est soumls aux deux conditions sulvantes: 4.This equipment is portable device. The output power of this device Is less than 20mW. The SAA test Is not required.

IMDA Compliance
Complies with IMDA Standards DA107974

FCC compliance

This device has been evaluated to meet general AF exposure requirements. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful Interference, and the device must accept any interference received, Including interference that may cause undesired operation.
NOTE: The manufacturer Is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radiate radio frequency energy and, If not Installed and used In accordance with the instructions. may cause harmful interference to radio communication lions.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radionic technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>