SoundPEATS B1WqAV2kksL RunFree Open Ear Wireless Earbuds User Guide
- June 13, 2024
- SoundPEATS
Table of Contents
B1WqAV2kksL RunFree Open Ear Wireless Earbuds
User Guide
Pairing
- Press and hold the power button for 3 seconds to turn on the RunFree headset. The headset will enter pairing mode once the solid white light begins flashing red and white.
- Activate Bluetooth on your device, and choose “SOUNDPEATS RunFree” from the Bluetooth List to pair.
Reset
- Plug in the headset so that it is in charging status.
- Press and hold the power button for 3 seconds. The light will flash red and white twice, indicating that the headset has been restored to factory settings.
- Unplug the charging cable and turn on the headset. The reset is complete.
Wearing
- Identify the left and right and wear accordingly
- Rotate the headset to find the most comfortable fit
Product Diagram
Button Controls
| Power On | Manually: Press and hold the power button for 3s |
|---|---|
| Power Off | Auto: Automatically turns off after 3 minutes of disconnection |
Manually: Press and hold the power button for 3s
Play / Pause| Press the power button
Volume-| Press the volume- button
Volume+| Press the volume+ button
Previous Track| Press and hold the volume- button
Next Track| Press and hold the volume+ button
Enter / Exit Game Mode| Triple tap the power button
Answer / Hang Up Phone Call| Press the power button
Reject Phone Call| Press and hold the power button for 1.5s
Switch Between Two Calls| Double press the power button
Activate Voice Assistant| Double press the power button
Q&A
Q1: How to charge the headset?
Use a Type-C adaptor to charge the headset current not over 1 A. Note - Please charge the headset at least once every three months when not in use for a long time.
Q2: How to disconnect the headset from the phone?
1 .Press and hold both volume buttons simultaneously for 3s. This will not work while playing music or during a phone call 2.Turn off Bluetooth on the phone.
Q3: How to connect with two devices at the same time?
1 .Turn on the headset and connect it to Device A. 2.Disconnect from Device A and enter pairing mode. 3.Connect the headset to Device B. 4.Reconnect the headset to Device A.
The RunFree headset will now automatically connect with both devices simultaneously.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>