avide SMART SERIES Smart RGB+W LED with WIFI User Manual
- June 13, 2024
- Avide
Table of Contents
SMART SERIES Smart RGB+W LED with WIFI
User Manual
General information
- Operating Temperature: -5 – 40°C
- This lamp is not suitable for use in dimmable circuits.
- Indoor use only.
- Use only in dry locations.
- Keep away from fire.
Use your phone to scan the OR code and install the „Smart Life” application.
Make sure your phone is connected to a WIFI net work. Open the Smart Life
application.
P1, Register an account in the APP (use your email address).
P2, Tap to „Add device”. Insert your Smart LED into a socket. To enter
pairing mode, switch the Smart LED On and Off 3 times in 10 seconds and then
the Smart LED will start blinking rapidly.
P3, Touch the „lighting” tab on the left and then the „lighting (WI-FI)”
icon.
P4, Touch „Confirm light blinks rapidly” button.
P5, Enter the Password of your WIFI network.
P6, Once you select Confirm after entering your password, the APP will
start to pair the Smart LED to your device. If it is succesfully done, you
will see „window 6″. Here you can change the name of your LED. Tap „Done”.
P7, Choose the LED bulb from the list and the control panel appears. You
can control. the white color from 2700-6500K and the RGB color mode
separately. Also, you can choose scenes on the top.
For technical or warranty support, please contact the authorised representative:
Bramcke GmbH
52353 Düren
An Gut Nazareth 18A
Germany
www.bramcke.de
Documents / Resources
|
avide SMART SERIES Smart RGB+W LED with
WIFI
[pdf] User Manual
SMART SERIES Smart RGB W LED with WIFI, SMART SERIES, Smart RGB W LED with
WIFI, RGB W LED with WIFI, LED with WIFI, WIFI
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>