avide Abldl Calendar 5w Desk Lamp User Manual
- May 15, 2024
- Avide
Table of Contents
avide Abldl Calendar 5w Desk Lamp User Manual
For technical or warranty support, please contact the authorised representative:
Bramcke GmbH
52353 Düren
An Gut Nazareth 18A
Germany
www.bramcke.de
1. Head of the lamp
2. LCD display
3. Touch button
4. Control buttons to set the time
5. Button cell holder
6. Connector of power adapter
Before using the product for the first time, please read the instructions and retain them for later reference.
Warnings:
Make sure that the appliance has not damaged during transport!
- Do not disassemble the product at home.
- To avoid damages, please do not overtighten the adjustable parts of the lamp.
- Please do not use the lamp at high temperatures or in high humidity environments. The lamp can only be used in dry, indoor conditions!
- Do not stare into the light of the LED.
In the following cases, please unplug the power cord immediately and do not use the lamp: The power cord or the connector has been damaged. If the power cable becomes damaged, it should be replaced with cables, obtained directly from the manufacturer or its service facility.
- The lamp base is humid or wet.
- In case of any damage of any part of the lamp.
- The lamp smokes or sparks.
- Flashing or failure of the LED light source.
The product contains built-in battery. Do not expose the product to extreme temperatures or disassemble the product. The battery can only be replaced by a specialist. When replacing the battery, please place the old battery in the designated collection.
- Please charge the battery using the supplied charger before using it for the first time.
- Use the touch switch to turn the LEDs on and off.
- The brightness of the lamp can be set steplessly by pressing the power button.
- When the battery dives, the brightness decreases continuously.
- Use the included USB cable and 5V USB adapter or USB port on your computer to recharge the battery.
- During charging, the indicator on the back lits continuously.
- When the battery is charged, the indicator light turns off.
- Continuous charging of the lamp while operating it, significantly reduces battery life.
The product has a built-in display which powered by a button cell. The button cell is replaceable on the back side when the display fades away.The display shows the time, date and temperature. Besides that it has alarm and snooze function also, for which several tones are available.
Set clock / date:
Press the “S” button on the back to start setting. The clock flashes to
indicate that it has entered the setting mode. You can then use the up and
down arrows to set the clock. Pressing the “S” button again will set the
minute, year, month and day.
If you have successfully set up, press the “S” button again to exit the setup
mode.
Set alarm clock:
Press the “M” button on the back to switch to the “alarm” function. This is
indicated by the “bell icon” in the top bar of the display. By pressing the
“set” button, you can set the clock by pressing again, the minute and then
snoozing function can be set between 1 and 60 minutes. As a last step, you can
select the tone of the alarm. Once you have selected the correct one, press
the “S” button again. You can return to the exact time by pressing the “M”
button. The alarm lasts for 1 minute and then the snooze (1-60 minutes)
function at the set intervals. If you press any of the clock buttons during an
alarm, the alarm will be set only for the next day.
Temperature (°C / °F)
Switch between Celsius and Fahrenheit by pressing the “down” arrow.
Time form(12h/24h)
Switch between 12h and 24h form by pressing the “up” arrow.
Cleaning / Maintenance
The unit may require cleaning at least once a month, depending on the manner
of use.
1. Power off the luminaire before cleaning! 2.Use a slightly moistened cloth
to clean the outer surface of the luminaire. Do not use any aggressive
cleaners. Avoid getting water inside the product and on the electric
components!
Pay attention to the polarity when replacing battery! • Do not use different
kinds of batteries and/or used and new batteries together! •
Do not open, burn and short circuit the batteries! • It is forbidden to charge
the batteries which are not rechargeable! Risk of explosion!
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>