HOLLYLAND V9802G Mars 4K Wireless Video Transmission System User Guide

: June 4, 2024
: HOLLYLAND

HOLLYLAND V9802G Mars 4K Wireless Vide Transmission System

KEY FEATURES

4K 30fps HDMI input and output
Color LCD
Smart channel selection upon power on 66ms transmission latency 450ft (150m) wireless transmission distance LOS range for the receiver.
260ft (80m) wireless transmission distance LOS range for the app
SDI input and HDMI input for the transmitter.
SDI output and HDMI output for the receiver.
DC NP-F battery, and USB-C power supply.

PACKING LIST

SKU	1TXto1RX	1TX	1 RX
CD Transmitter	1	1	0
Receiver	1	0	1
Antenna	5	2	2
Cold Shoe	1	0	0
CID Type-C OTG Converter	1	0	0
Self-locking DC Adapter	1	1	1
User Guide	1	1	1
Warranty Card	1	1	1
Expansion Accessory	1	1	0

Note
The quantity depends on the contguration and is subject to the actual list of equipment purchased.

PRODUCT CONNECTION

TYPICAL SETUP

DUAL MONITOR SETUP

PRODUCT INTERFACE

Transmitter

Antenna Interface
HDMI Input
SDI Input
DC Power Input
Expansion Accessory Mounting Hole
Color LCD
Menu Button
Power Button
USB-C Interface
1/4 Threaded Hole
Outet

Receiver

Antenna Interface
HDMI Output
DI Output
DC Power Input
Expansion Accessory
Mounting Hole
Color LCD Menu Button
Power Button
USB-C
Interface d
1/4 Threaded Hole
Outlet

INSTALLATION

INSTALLATION OF TRANSMITTER

Install the antenna shown in the picture.
Install the transmitter on the camera with the cold shoe
Connect the transmitter to the corresponding interface of the camera with an HDMI cable or SDI cable.
Install the battery compatible with NP-F970, or other batteries of the same series.
Push the power buton up to tum on the device.

INSTALLATION OF RECEIVER

Install the antenna shown in the picture Install t.
he receiver on the stand through the 1/4 threaded hole on the bottom of the device.
Install the battery compatible with NP-F970, or other batteries of the same series
Push the power button up to turn on the device.

OLED DISPLAY

A Transmitter

Receiver Number
Signal Strength
Indicator of Power Supply
USB PIugged In
Video Format
Channel Display
Device Wi-Fi ID
Application Mode

B Receiver

Signal Strength
Indicator of Power Supply
USB Plugged In
Video Format
Channel
Display Device
Wi-Fi ID Application Mode

CHANNEL SELECTION

Push the rocker-styled button up or down on the transmitter or receiver and press the button to select a channels of the receiver and transmitter are synchronized automatically.

After a channel is selected, press and hold the button for 3s to enter the menu options. You can push the button upor down to change the menu options.

APP INSTALLATION AND CONNECTION

Download the HollyView app

Connect the device to a mobile phone

Find the WIFI named HLD+DEVICE ID on the mobile phone and enter the WIFI password the default password is 12345678 to connect the device to the mobile phone. After the connection is Successful, you can use the app on the mobile phone for monitoring.

PARAMETERS

| Tran s mitter| Receiver
---|---|---

Interface

| Antenna RP-SMA male

HDMI 1.4 b input Type-A female 3G-SDI input

DC input 2.0mm core socket

USB Type-C USB 2.D OTG

| Antenna RP-SMA male

HDMI 1.4 b output Type-A female 3G-SDI output

DC input 2.0mm core socket

USB Type-C USB 2.D OTG

Power supply

| DC input: 6V-16V USB Type-C 5V/2.5A

not supporting the QC and PD

protocols

NP-F battery: 6.BV-8.4V

| DC input: 6V-16V

USS Type-C: 5V/2.5A

(not supporting the QC PD protocols)

NP-F battery: 6.8V-8.4V

Power consumption| <8.5W {typral}| <SW (typical}
Weight| 223g(Hbz)

antennas

| 223g (Hbz)

antennas

Dimension

| L x W xH 115x65x32mm {4.5″x2.5’x1.3′)| L x W x H 115x65x32mm (4.5″x2.5″x1.3″)
Operati11g frequency| 5.1GHz-5.BGHz| 5.1GHz-5.BGHz
Modulation| 802.11n| 802.11n
TX power| 21dBm| 21dB
RX sensitivity| NIA|
Bit rate| 8Mtps-20Mbps
Latency|
|
Bandwidth| 20MHz
Audio format|
Operating temperature| -10°Cto60°C
Storage temperature| -40 c to 60
ESD protection| Couto discharge: ±6kV: air discharge test data

HDMI Input Format	HDMI Output Format	SDI Output Format
720p50/59.94/60	720p50/60	720p50/60
100050/59.94/60	108 50/60	100050/60
1080p23.98/24/25/29.97/30	1060p24/25/30	1080p24/25/30
1080p50/59.94/60	1060p50/60	1060p50/60
3840″2160 24/25/30	3840 2160 24/25/30	1060P24/25/30

SDI Input Format	HDMI Output Format	SDIOutput Format
1080p50/59.94/60 Level A

1080p50/59.94/6

|

1080p50/59.94/60 Level A

1080p50/59.94/60 Level B
1080i50/59.94/60| 1080i50/59.94/60| 1080i50/59.94/60
1080p23.98/24/25/29.97/30| 1080p23.98/24/25/29.97/30| 1080p23.98/24/25/29.97/30
1080psf23.98/24| 1080p23.98/24| 1080p23.98/24
1080psf25/29.97/30| 100050/59.94/60| 1080i50/59.94/60
720p50/59.94/60| 720p50/59.94/60| 720p50/59.94/60

SUPPORT
If you have any problems in using the product or need any help, please visit the following to get more technical support. Support@holyand- tech.com www.holyland-tech.com

Note
The frequency range and wireless TX power of the device vary based on the regulations of different countries and regions.

Safety Precautions
Do not place the product near or inside heating devices including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers water heaters, and gas stoves to prevent the battery from overheating and exploding. Do not use non-original charging cases, cables, and batteries with the product. The use of non-original spare parts may cause electric shock, fire, explosion, or other dangers.

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance Could void the user’s authority to operate the equipment, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions

This device may not cause harmful interference.
This device must accept any interference including interference that may cause undesired operation.

Note
Device, pursuant to Part 18 of the FG limits are designed to provide reasonable protection against harmful interference in a residential installation. his equipment generates, Uses, and can radiate radio energy, and it it is not installed and used in accordance with ten instructions, it may cause interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, you are encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is Connected
Consult the dealer or an experienced radio/ iv technician tor help.