ekomia Lumy Solid Wood Babybed Instructions
- June 13, 2024
- ekomia
Table of Contents
ekomia Lumy Solid Wood Babybed
IMPORTANT
IMPORTANT – KEEP FOR FUTURE REFERENCE – READ CAREFULLY
Warning notice:
- Warning: Make sure the cot is not positioned close to open fire and sources of intense heat, e.g. electric heaters, gas heaters;
- Warning: Do not use the cot if any part is broken, torn or missing, and use only spare parts recommended by ekomia;
- Warning: Do not leave any objects in the cot, or place the cot close to any objects, which could serve as a foothold or present a choking hazard or danger of strangulation, e.g. strings, curtain cords, etc.;
- Warning: Do not use more than one mattress in the cot.
- The lowest position of the cot base is the safest. Once your child is old enough to sit up, the cot should always be used with the cot base in its lowest position.
- The thickness of the mattress must be chosen so that the internal height (from the surface of the mattress to the upper edge of the cot frame) is at least 500 mm with the base of the cot at its lowest setting and at least 200 mm with the base of the cot at its highest setting.
- For this cot please use a mattress with a size of 140cm x 70cm. There must be no gap of more than 30 mm between any part of the mattress and the side and end parts of the cot.
- Always fasten all fittings properly when assembling and regularly check whether they need to be tightened, and tighten any loose parts;
- To prevent falls, the cot should be no longer used for any child which is able to climb out of the cot;
- Do not use any mattress thicker than 13 cm on the cot.
This Lumy cot (BE0061C / BE0061W) was designed and manufactured by ekomia GmbH
in accordance with DIN standard
EN 716-1:2015 (cots and folding cots for domestic use).
AGE SIZE
PARTS
INSTALLATION
+49 (0) 30 41 76 19 72
ekomia.de
[email protected]
[email protected]
Read User Manual Online (PDF format)
Loading......