QTL TECHNOLOGIES Pro G4 Gaming Headphones User Guide
- June 13, 2024
- QTL TECHNOLOGIES
Table of Contents
QTL TECHNOLOGIES Pro G4 Gaming Headphones
Any questions?
info@otltechnologies.com
For detailed set up instructions visit
www.otltechnologies.com/product/gaming
headphones
SAFETY INSTRUCTIONS:
- Read all the instructions carefully before using the product and keep them for future reference.
- Do not immerse in water.
- Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
- We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
- Set volume to low before turning on sound.
- Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.
PACKAGING CONTENTS
IN-LINE CONTROLLER
- Mic Mute Switch
- Volume control
GENERAL INSTRUCTION
- Please make sure to wear the headphones in the correct way for a proper fit and the best sound quality.
- Ear cup with detachable microphone and 3.5mm AUX cable should be the left channel (Marked “L” )
- The other side is the right channel (marked “R”)
- To be satisfied with the sound quality, please make sure that the plugs are fully inserted into both jacks. If the plugs are not fully inserted or a loose fit, you may hear sound from one side or no sound from both ear cups.
PRODUCT SPECIFICATION
- Driver: Ф50mm
- Sensitivity: 97dB ± 3dB
- Impedance: 32 Ω
- Frequency: 20-20000 Hz
- Plug capability: 3.5 mm jack
- Cable length: Approx. 150 cm
- Microphone: 43+/-3dB, omni-directional
PC / MOBILE & TABLET AND NINTENDO SWITCHTM SETUP
- Most new PC’s have a single 3.5mm jack connection. Simply plug the 3.5mm jack from the headphones into the port on your PC*. The same applies when connecting to a mobile, tablet and Nintendo SwitchTM
- Console. The headphones should work upon connection.
- If your PC uses separate Green/Pink connectors for audio, you will need a PC splitter cable (not provided).
- Chat available for games that support in-game chat capability.
PS4™ SETUP
- Go to Settings > Devices > Audio Devices
- Select Headset Connected to Controller for Input & Output Device
- Set Output to Headphones to All audio
- Set volume Control (headphones) level to maximum
- The volume level of the headphones and microphone can be adjusted within the PS4™ system menu as below
- Headphone volume: Settings > Devices > Audio Devices > Volume control (headphones)
- Microphone level: Settings > Devices > Audio Devices > Adjust microphone level (adjust the microphone level until the indicator shows “good”)
XBOX ONE™ SETUP
Note: OTL Gaming headphones requires the NEW Xbox One™ Controller (with 3.5mm jack). If you are using an original Xbox One™ controller, you will require the *Xbox One™ stereo headset adapter (not included)
XBOX ONE™ VOLUME SETUP
HEADSET CHAT MIXER
- Press the Xbox button on your controller
- Go to System tab
- Select Audio
- Ensure the headset Mic is turned on
- Set the headset volume to maximum
- Set the headset Chat Mixer to the middle
- Set the Mic Monitoring to your desired level
XBOX ONE™ VOLUME SETUP SURROUND SOUND
- Press the Xbox button on your controller
- Go to System tab
- Select Settings > Display & Sound > Audio Output
- Select headset to Windows Sonic for Headphones
WARNING
- This product is not a toy.
- Do not disassemble, repair or modify the headphones.
- Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
- Avoid dropping the headphones as it may cause damage to the product.
- Do not insert jack plug into electric sockets.
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC
EQUIPMENT (PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general house hold
waste. For proper treatment, recovery and recycling, please take these
products to designated collection points, where they will be accepted on a
free-of-charge basis. Alternatively, in some countries you may be able to
return your products to your local retailer upon the purchase of an equivalent
new product. Disposing of this product correctly will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
designated collection point. Penalties may be applicable for incorrect
disposal of this waste, in accordance with national legislation..
www.otltechnologies.com
info@otltechnologies.com
Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>