MOTOROLA SOLUTIONS MOTOTRBO R7 Series Portable Digital Two Way Radios User Manual

**MOTOROLA SOLUTIONS MOTOTRBO R7 Series Portable Digital Two Way

Radios**

Introduction

Operational Cautions for Intrinsic Safe Equipment

Radio units must be ordered with the intrinsic safety option and shipped from the Motorola Solutions manufacturing facility with the hazardous location certification label. Radio will not be upgraded to this capability or labeled once they have been shipped.

Operational Cautions

W A R N I N G

|

• DO NOT substitute components. Substitution in component could void the intrinsic safety rating and result in unsafe condition of hazardous areas.
• DO NOT change batteries or accessories in hazard areas, to reduce the risk of ignition of a flammable atmosphere, battery pack must only be changed in nonflammable areas.
• Unauthorized modification, or incorrect repair or service to the intrinsically safe product could adversely affect the certification rating and result in unsafe condition in hazardous areas.
• DO NOT operate equipment in a hazardous atmosphere unless it is a type especially qualified (for example, UL Approved) for such use. An explosion or fire may result.
• DO NOT operate a UL Approved Product in a hazardous atmosphere if it has been physically damaged (for example, cracked housing). An explosion or fire may result.
• DO NOT replace or change accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire.
• DO NOT disassemble a UL Approved Product unit in any way that exposes the internal electrical circuits of the unit.
• To reduce the risk of ignition of a flammable atmosphere, batteries must only be charged in an area known to be nonflammable.

---|---

Operational Warnings

W A R N I N G

|

• To avoid risk of fire, explosion, and burns to the Li-Ion Battery listed in MTR TIA Group 6 Batteries table, DO NOT disassemble, crush, or heat above 100 °C (212 °F) or incinerate.
• Failure to use a Motorola Solutions intrinsically safe battery or accessory specifically certified for that  radio unit will negate the certification rating and could result in unsafe condition in hazardous areas.
• DO NOT disassemble an intrinsically safe product in any way that exposes the internal circuits of the unit. This could result in unsafe condition in hazardous areas.
• Unauthorized modification, or incorrect repair or service to the intrinsically safe product could adversely affect the certification rating and result in unsafe condition in hazardous areas.
• Use of non-Motorola Solutions parts or substitution of parts will void the intrinsic safety approval rating of the Motorola Solutions unit and could result in unsafe condition in hazardous areas.

---|---

The following Radio models, batteries, and audio accessories can be used with the Radio model series.

MOTOTRBO R7 Series and Super Tanapas

MTR TIA Group 6 Batteries

Accessories

(IP68)
PMLN8295A| 2-Wire Swivel Loud Audio Earpiece with Eartip
PMLN8341A| 1-Wire Surveillance Kit with Loud Audio Translucent Tube
PMLN8342A| 2-Wire Surveillance Kit with Loud Audio Translucent Tube
PMLN8343A| 3-Wire Surveillance Kit with Loud Audio Translucent Tube
PMMN4131A| RM730 IMPRES Windporting Remote Speaker Microphone, Small (IP68)

Accessories (Continued)

Antenna

Use only Motorola Solutions authorized antenna for specific radio model. For more information, see www.motorolasolutions.com.

The MOTOTRBO R7 Series LMR Device for HAZ LOC are listed by UL to standards ANSI/
TIA 4950-B and CAN/CSA C22.2 No.157-92. Classification Rating Class I, Division 1,
Groups C, D; Class II Group E, F, G; Class III, Hazardous (Classified) Locations.
UL 121201-2019 and CAN/CSA C22.2 No. 213-19Class I, Division 2, Groups A, B, C, D; T3C. Tamb = -20 °C to +60 °C.
Intrinsically Safe Sécurité Intrinsèque when used with Motorola Solutions MTR TIA Group 6 Batteries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>