Fluance HF50BB 5.0 Channel Speaker System User Manual

Fluance HF50BB 5.0 Channel Speaker System

Introduction

When you’re looking to invest in a new speaker system, you want one that delivers not just on performance, but also on aesthetics, durability, and added value. Enter the Fluance HF50BB 5.0 Channel Speaker System, a product that promises to elevate your auditory experience whether you’re watching movies, listening to music, or being engrossed in the latest TV show. Here’s a comprehensive look at what makes this system stand out.

Product Specifications

Signature HiFi 3-Way Floorstanding Tower Speakers Specifications

• Speaker Configuration: 3 Way – 4 Driver Floorstanding Main Speakers
• Tweeter: 1 Inch Neodymium Balanced Silk Dome Ferrofluid Cooled
• Midrange: 5 Inch Woven Glass Fiber Butyl Rubber Surrounds Separate Enclosure
• Power Handling: 90 – 200 Watts
• Woofer: Dual 8 Inch Polypropylene Butyl Rubber Surrounds Separate Enclosures
• Frequency Response: 35hz – 20khz
• Sensitivity: 89 Db @ 2.83v / 1m
• Crossover Frequency: 530/2600 Hz – Pcb Mounted Circuitry
• Impedance: 8 Ohm Compatible
• Enclosure: Tuned Rear Port Bass Reflex Tower Design Dampened
• Dimensions: 47.24 x 10.9 x 15.4 Inch
• Speaker Weight: 62.4 Pounds/Speaker

Signature HiFi 2-Way Center Channel Speaker Specifications

• Speaker Configuration: 2 Way – 3 Driver Center Speaker (Wall Mountable)
• Tweeter: 1 Inch Neodymium Balanced Silk Dome Ferrofluid Cooled
• Woofer: Dual 5 Inch Glass Fiber Treated Butyl Rubber Surrounds
• Power Handling: 40 – 120 Watts RMS
• Frequency Response: 60Hz – 20KHz
• Sensitivity: 92dB @ 2.83V / 1m
• Crossover Frequency: 2300 Hz Phase Coherent
• Impedance: 8 Ohm Compatible
• Enclosure: Dual Tuned Rear Port Bass Reflex Design
• Dimensions: 7.3 x 18.9 x 10.6 inches / 18.5 x 48 x 26.9 cm (HxWxD)
• Speaker Weight: 16.3 pounds/speaker

Signature HiFi 2-Way Bipolar Surround Speakers Specifications

• Speaker Configuration: 2 Way – 3 Driver Passive Bipolar Surround Sound Speakers
• Tweeter: Dual 1 Inch Neodymium Balanced Silk Dome Ferrofluid Cooled
• Woofer: 5 Inch Woven Glass Fiber Butyl Rubber Surround
• Power Handling: 30 – 120 Watts RMS
• Frequency Response: 40Hz – 20KHz
• Sensitivity: 89 dB
• Crossover Frequency: 3900 Hz Phase Coherent – PCB Mounted Circuitry
• Impedance: 8 Ohm Compatible
• Enclosure: Tuned Rear Port Bass Reflex Tower Design Dampened
• Dimensions: 8.9 x 16.9 x 7.1 inches / 22.6 x 42.9 x 18.0 cm (HxWxD)
• Speaker Weight: 10.69 pounds/speaker

General Product Details

• Product Dimensions: 33.09 x 18.9 x 47.24 inches
• Item Weight: 89.4 pounds

What’s in the Box?

The Fluance HF50BB 5.0 Speaker System comes with:

• 2x Signature Series Floorstanding Loudspeakers
• 2x Signature Series Bipolar Speakers
• Signature Series Center Channel Speaker
• 4x Outrigger Speaker Stabilizers for the floor-standing loudspeakers
• 8x Isolation Floor Spikes, also for the floor-standing loudspeakers
• A promise of lifetime customer support

Feature Spotlight

• Focus on Sound Excellence:
  Fluance’s Signature Series is the result of meticulous engineering, with every detail perfected after rigorous testing. Whether it’s the powerful 8″ woofers that reproduce cinema-inspired bass, the woven-glass midrange drivers that accentuate dialogue, or the high-end Neodymium tweeters that heighten every minute detail, the focus remains on delivering unmatched sound quality.

• Detailed Center Channel:
  The dedicated center channel perfects the vocals and dialogue of your movies and music, ensuring you’re right in the middle of the action.

• Wide Dispersion Bipolar Speakers:
  This unique feature creates a three-dimensional soundstage through its dual bi-directional speaker configuration. This ensures optimum surround imaging, making every audio experience more immersive.

• Precision Crafted Cabinets:
  Crafted with engineered MDF wood, the acoustically inert cabinets ensure a warm, distortion-free sound. Special attention is given to sound isolation, with the tower speaker’s cabinet comprising separate internal enclosures.

• Sublime Specifications:
  From the 3-Way 4 Driver Floorstanding Main Speakers to the 2-Way 3 Driver Center Speaker and the 2-Way 3 Driver Passive Bipolar Surround Sound Speakers, every component boasts impressive specifications. Notably, the floor-standing speakers feature dual 8-inch polypropylene butyl rubber surrounds, while the center channel and bipolar surround speakers come with 1-inch neodymium- balanced silk dome ferrofluid-cooled tweeters.

• Design and Dimensions: The Fluance HF50BB is not just about performance. The design is sleek, with dimensions of 33.09 x 18.9 x 47.24 inches. The entire system weighs 89.4 pounds, making it a substantial addition to any room.

Product Usage Instructions

1. Positioning : For optimal sound, place the floor-standing speakers at an equidistant triangle from the listening position. Center channel speakers should be placed directly below or above the viewing screen.
2. Connectivity : Use high-grade speaker cables for the best sound quality. Ensure the positive and negative connections are consistent across all speakers.
3. Volume Levels : Initially, keep the volume levels moderate for about 20-30 hours to effectively break in the new speakers.
4. Receiver Settings : Ensure that your receiver is configured to channel audio appropriately to all parts of the 5.0 system for an immersive experience.

Care and Maintenance

1. Cleaning : Dust the speakers lightly using a soft, lint-free cloth. If needed, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents.
2. Inspection : Periodically inspect all wiring and connections to ensure they are secure and free of damage.
3. Storage : If storing the speakers for an extended period, use the original packaging to prevent any potential damage.
4. Humidity and Temperature : Keep the speakers in a climate-controlled environment. Excessive moisture and heat can damage the components.

Safety Instructions

1. Volume : Avoid prolonged exposure to high volume levels as it can cause hearing loss and potentially damage the speakers.
2. Electrical Safety : Make sure the speaker system is properly grounded to prevent electrical shocks. Always unplug the system during electrical storms.
3. Placement : Ensure the floor-standing speakers are securely positioned, especially if you have children or pets. Use the provided outrigger stabilizers and isolation floor spikes for added security.
4. Ventilation : Make sure there is sufficient ventilation around the speakers to prevent overheating of any components.
5. Cable Management : Keep all cables neatly organized and out of walkways to prevent tripping hazards.

Additional Tips

1. Firmware Updates : Occasionally check for firmware updates if your system supports it. Updates can offer new features or improve existing functionalities.
2. Calibration : For the most accurate sound, consider calibrating your system with a sound meter.
3. Energy Saving : Turn off the speakers when not in use to save energy and extend the lifespan of the product.

By following these guidelines, you can ensure that your Fluance HF50BB 5.0 Channel Speaker System not only delivers optimum performance but also has a long and productive life.

FAQs

What are the dimensions of the Fluance HF50BB 5.0 Channel Speaker System?

The dimensions of the speaker system are 33.09 x 18.9 x 47.24 inches.

What is included in the box when purchasing the Fluance HF50BB 5.0 Speaker System?

The speaker system comes with 2x Signature Series Floorstanding Loudspeakers, 2x Signature Series Bipolar Speakers, Signature Series Center Channel Speaker, 4x Outrigger Speaker Stabilizers for the floor-standing loudspeakers, 8x Isolation Floor Spikes for the floor-standing loudspeakers, and a promise of lifetime customer support.

How should I position the speakers for optimal sound?

For optimal sound, place the floor-standing speakers at an equidistant triangle from the listening position. Center channel speakers should be placed directly below or above the viewing screen.

What type of cables should I use to connect the speakers?

Use high-grade speaker cables for the best sound quality. Ensure the positive and negative connections are consistent across all speakers.

How should I clean the speakers?

Dust the speakers lightly using a soft, lint-free cloth. If needed, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents.

How should I store the speakers if I'm not using them for an extended period?

If storing the speakers for an extended period, use the original packaging to prevent any potential damage.

Are there any safety instructions I should be aware of?

Yes, avoid prolonged exposure to high volume levels as it can cause hearing loss and potentially damage the speakers. Make sure the speaker system is properly grounded to prevent electrical shocks. Always unplug the system during electrical storms. Ensure the floor-standing speakers are securely positioned, especially if you have children or pets. Use the provided outrigger stabilizers and isolation floor spikes for added security. Make sure there is sufficient ventilation around the speakers to prevent overheating of any components. Keep all cables neatly organized and out of walkways to prevent tripping hazards.

How can I extend the lifespan of the speaker system?

Turn off the speakers when not in use to save energy and extend the lifespan of the product.

Should I check for firmware updates for my speaker system?

Occasionally check for firmware updates if your system supports it. Updates can offer new features or improve existing functionalities.

Is calibration necessary for the speaker system?

For the most accurate sound, consider calibrating your system with a sound meter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>