Roland DU3-64 64 Inch Eco Solvent Inkjet Printer Cutter Instruction Manual

Roland DU3-64 64 Inch Eco Solvent Inkjet Printer Cutter Instruction Manual

To Ensure Safe Use

Meaning of WARNING and CAUTION

WARNING| Used for instructions intended to alert the user to the risk of death or severe in- jury should the unit be used improperly.
---|---
CAUTION| Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.*Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings as well as to domestic animals or pets.

About the Symbols

| The symbol alerts the user to important instructions or ** warnings. The specific meaning of the symbol is determined by the design contained within the  symbol. The symbol at left means “danger of electrical shock.”
---|---

| The  symbol alerts the user to items that must never be carried out (are forbidden). The specific meaning of the symbol is determined by the design contained within the  symbol.The symbol at left means the unit must never be disassembled.
**| The symbol alerts the user to things that must be carried out. The specific meaning of the symbol is determined by the design contained within the symbol. The symbol at left means the power-cord plug must be unplugged from the outlet.

Incorrect operation may cause injury

WARNING

| Be sure to follow the operation procedures described in this ma‐ chine’s user’s manual. Never allow anyone unfamiliar with the usage or handling of the machine to touch it.Incorrect usage or handling may lead to an accident.
---|---
| Keep children away from the machine.The machine includes areas and components that pose a hazard to children and may result in injury, blindness, choking, or other serious accident.
| Never operate the machine while tired or after ingesting alcohol or any medication. Operation requires unimpaired judgment. Operating with impaired judgment may result in an accident.
| Always unplug the power cord when attaching or removing parts and optional parts and when performing cleaning or maintenance that does not require the machine to be connected to a power source. Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.
| Never attempt to disassemble, repair, or modify the machine. Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service technician.

CAUTION

****

| Conduct operations in a clean, brightly lit location. Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the result of an inadvertent stumble.
---|---
| Never climb or lean on the machine. The machine is not made to support a person. Climbing or leaning on the machine may dislodge components and cause a slip or fall, resulting in injury.
| Keep the fingers and face away from the blower fan. Fingers or hair may become entangled, resulting in injury.

Danger of electrical short, electrical shock, or fire

WARNING

****

| Connect to an electrical outlet that complies with this machine’s rat‐ ings (for voltage, frequency, and current).Incorrect voltage or insufficient current may cause fire or electrical shock.
---|---
| Never use outside or in any location where exposure to water or high humidity may occur. Do not touch the power cord, plug, or electrical outlet with wet hands. Doing so may result in fire or electrical shock.
| Never allow any foreign object to get inside. Never expose the ma‐ chine to liquid spills. Inserting objects such as coins or matches or allowing beverages to be spilled into the ventilation ports may result in fire or electrical shock. If anything gets inside, immediately disconnect the power cord and contact your authorized Roland DG Corporation dealer.
| Never place any flammable object nearby. Never use a combustible aerosol spray nearby. Never use in any location where gases can ac‐ cumulate. Combustion or explosion could occur.
| Handle the power cord, plug, and electrical outlet correctly and with care. Never use any article that is damaged. Using a damaged article may result in fire or electrical shock.
| When using an extension cord or power strip, use one that adequate‐ ly satisfies the machine’s ratings (for voltage, frequency, and cur‐ rent).Use of multiple electrical loads on a single electrical outlet or of a lengthy exten‐ sion cord may cause fire.
| Connect to ground. This can prevent fire or electrical shock due to current leakage in the event of malfunction.
| Position the machine so that the power plug is within immediate reach at all times. This is to enable quick disconnection of the power plug in the event of an emer‐ gency. Install the machine next to an electrical outlet. Also, provide enough emp‐ ty space to allow immediate access to the electrical outlet.
****| If sparks, smoke, burning odors, unusual sounds, or abnormal opera‐ tion occur, immediately unplug the power cord. Never use if any component is damaged. Continuing to use the machine may result in fire, electrical shock, or injury. Con‐ tact your authorized Roland DG Corporation dealer.

To Ensure Safe Use

use the machine in an excessive manner that exceeds its capacity. Doing so may result in injury or fire.
****| If the machine will not be used for a long period, disconnect the pow‐ er cord. This prevents an accident caused by unexpected electric leakage or unintentional start of the machine.

Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to damage.

Never allow to get wet.

Never bend or twist with exces‐ sive force.

Never make hot.

Never pull with excessive force.

Dust may cause fire.

Never bundle, bind, or roll up.

Danger of fire, burns, or toxic gas emissions

CAUTION

High Temperature
Areas such as the dryer become hot. Exercise caution to avoid burns.

Warning Labels

Warning labels are affixed to the machine to make areas of danger immediately clear. The meaning of this label is indicated below. Be sure to heed this warning. Also, never remove the labels or allow them to become dirty.

Caution: High Temperature
The dryer becomes hot. Exercise caution to avoid burns.

Other important notes

Disclaimers and Standard Information

Company names and product names are trademarks or registered trademarks of their respective holders.

Thank you very much for purchasing this product.

• To ensure correct and safe usage with a full understanding of this product’s performance, please be sure to read through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• This manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please inform Roland DG Corporation.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made using this product.

NOTICE
Grounding Instruction

• In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.
• Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug.
• Repair or replace damaged or worn cord immediately

For the USA
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT

Responsible Party: Roland DGA Corporation

• Address: 15363 Barranca Parkway Irvine, CA 92618, U.S.A.
• Telephone 949-727-2100
• Type of Equipment: Printer Accessory
• Model Name: DU3-64, DU3-54

NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Use only I/O cables that have been designed and manufactured specifically for this device.

For Canada
CAN ICES-3 (A)/NMB-3(A)

For EU Countries

Manufacturer:

ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
The importer in the EU:

Roland DG EMEA N.V.
Bell Telephonelaan 2G, 2440 Geel, Belgium

For UK

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The importer in the UK:

Roland DG (U.K.) Ltd.
Griffin House, Windmill Road, Clevedon Business Park, Clevedon, North Somerset, BS21 6UJ, United Kingdom

For EU Countries

WARNING Operation of this equipment in a residential environment could cause radio interference.

For EU Countries

This product must be disposed of separately at your local waste recycling center. Do not dispose of in household waste bin.

For California

WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>