APC AP8886 Power Distribution Unit (PDU) Specifications And Datasheet

APC AP8886 Power Distribution Unit (PDU)

Introduction

The APC AP8886 Power Distribution Unit (PDU) is a beacon of control and dependability in the field of effective power management and distribution. This PDU offers cutting-edge capabilities to guarantee seamless power distribution, monitoring, and protection. It was developed to fulfill the demands of contemporary data centers and sensitive electrical situations. We’ll take a thorough voyage through the APC AP8886 PDU’s capabilities in this article.

We will explore how this PDU equips organizations with the necessary resources to optimize their electrical infrastructure, from its technical specs to its cutting-edge features, usage instructions, maintenance recommendations, and troubleshooting insights. Join us as we explore the APC AP8886 Power Distribution Unit and the realm of superior power distribution.

Overview

• Presentation : APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. The output and input connections are (30) C13 & (12) C19, and the cable length is 1.83m. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower the total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra-low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
• Lead time : Usually in Stock

Main

• Main Input Voltage : 400 V 3 phases
• PDU type : Metered
• Main Output Voltage : 230 V
• Input Connection Type : IEC 60309 32 A 3P + N + E
• Number of rack unit : 0U
• Cable length : 1.83 m
• Provided equipment : Installation guide, Rack mounting brackets, Serial configuration cable, Safety guide

Physical

• Colour : Black
• Height : 182.9 cm
• Width : 5.6 cm
• Depth : 5.1 cm
• Net weight : 8.72 kg
• Mounting location : Side
• Mounting preference : No preference
• Mounting mode : Rack-mounted
• Mounting position : Vertical

Input

• Max line current : 32 A
• Input current limits : 32 A
• Load capacity : 22000 VA
• Network frequency : 50/60 Hz

Output

• Number of power socket outlets : 30 IEC 60320 C13, 12 IEC 60320 C19

Conformance

• Product certifications : VCCI class A, VDE
• Standards : EN 55022 class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC part 15 class A, ICES-003

Environmental

• Ambient air temperature for operation : -5…60 °C
• Relative humidity : 5…95 %
• Operating altitude : 0…10000 ft
• Ambient air temperature for storage : -25…65 °C
• Storage Relative Humidity : 5…95 %
• Storage altitude : 0.00…15240.00 m

Packing Units

• Unit Type of Package : 1 PCE
• Number of Units in Package 1 : 1
• Package 1 Height : 205 cm
• Package 1 Width : 11.2 cm
• Package 1 Length : 17 cm
• Package 1 Weight : 11.55 kg

Offer Sustainability

• Sustainable offer status : Green Premium product
• REACh Regulation : REACh Declaration
• EU RoHS Directive : Compliant
• EU RoHS Declaration
• Lead-free : Yes
• Mercury-free : Yes
• RoHS exemption information : Yes
• Environmental Disclosure : Product Environmental Profile
• Circularity Profile : End of Life Information
• WEEE : The product must be disposed of on European Union markets following specific waste collection and never end up in rubbish bins
• Optimized Energy Efficiency : Energy-efficient product
• Take-back : Take-back program available
• Contractual warranty:
• Warranty : 2 years repair or replace
  Recommended replacement(s)

FAQ’s

What is the APC AP8886 Power Distribution Unit (PDU)?

The APC AP8886 is a Power Distribution Unit (PDU) designed to distribute electrical power to connected devices in a data center or rack-mounted equipment setup.

What are the key features of the APC AP8886 PDU?

The APC AP8886 PDU typically features multiple outlets, remote power monitoring and control, surge protection, and a variety of input and output options.

How many outlets or receptacles does the APC AP8886 PDU have?

The number of outlets or receptacles on the APC AP8886 PDU can vary depending on the specific model and configuration, with options for multiple outlets to accommodate different equipment.

Is this PDU designed for single-phase or three-phase power distribution?

The APC AP8886 PDU can be available in both single-phase and three-phase configurations, allowing you to choose the one that suits your power distribution needs.

What is the input voltage range and compatibility of this PDU?

The input voltage range and compatibility can vary, but this PDU is often designed to work with a wide range of input voltages, including standard voltages found in data centers.

Does the APC AP8886 PDU support remote power monitoring and control?

Yes, this PDU often supports remote power monitoring and control through network connectivity, allowing you to monitor and manage connected devices remotely.

Is surge protection integrated into the APC AP8886 PDU?

Surge protection is a common feature of this PDU, helping to safeguard connected equipment from power surges and fluctuations.

Can this PDU be mounted in a standard 19-inch equipment rack?

Yes, the APC AP8886 PDU is often designed for rack-mount installation and is compatible with standard 19-inch racks commonly used in data centers.

What types of output connections or receptacles are available on this PDU?

The types of output connections or receptacles can vary based on the PDU model, with options for different plug types and configurations to match your equipment.

Does the APC AP8886 PDU support load balancing and monitoring?

Yes, load balancing and monitoring are often supported features, allowing you to distribute the power load evenly across connected devices and monitor power consumption.

Is there a warranty provided with the APC AP8886 PDU?

The warranty terms for this PDU may vary, so it's advisable to check the warranty information provided by the manufacturer or retailer.

Can the APC AP8886 PDU be used in various data center and IT environments?

Yes, this PDU is often suitable for use in a wide range of data center and IT environments, offering power distribution and protection.

Are there any specific maintenance requirements for the APC AP8886 PDU?

Regular inspections, cleaning, and ensuring proper ventilation around the PDU are recommended maintenance practices to keep it functioning optimally.

References:APC AP8886 Power Distribution Unit (PDU) – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>