nordlux 2113210132 Avenue 6 Spot Bar Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux 2113210132 Avenue 6 Spot Bar Light Instruction Manual
Symbols
**** The lamp should only be installed in areas where direct contact with water cannot occur.
Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city purchased this product.
The lamp is only suitable for
connecting directly to the mains.
The mounting instruction must not be discarded.
Do not exceed the maximum wattage.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
The minimum distance between lamp and lit area.
Z-connection: the wire cannot
be replaced if damaged, and the lamp must be discarded.
General maintenance: Use a
soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C)
with a mild detergent to remove grease stains or similar. Never use detergents
containing abrasive or solvent. Only switch on the lamp once all the water has
evaporated
Specifically for mouth-blown glass: Mouth-blown glass is formed manually.
Because of this unique process, air bubbles may occur in the glass, just as
the thickness of the glass may vary. This is to be seen as a natural
consequence of the manual process, and is what gives Mouth-blown glass its
character and organic look.
Always clean mouth-blown glass cold.
We recommend the use of a 90° C temperature resistant cable.
Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>