nordlux Avenue 3 Spot Plate Light User Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux Avenue 3 Spot Plate Light
Product Information
- Product Name: Lamp
- Model: Unknown
- IP Rating: IP20
- Class: I
- Usage: Indoor use only
- Installation: Wall mounting
Product Usage Instructions
- Before installing the lamp, ensure that the area is suitable for indoor use and does not come in direct contact with water.
- The lamp is designed for installation on walls. Make sure to have the necessary tools and screws for mounting.
- Connect the lamp to the electrical supply. The lamp is equipped with an earth terminal, which must be connected to the yellow/green earth wire.
- Ensure that the lamp is securely mounted on the wall, following the provided instructions or guidelines.
- The lamp does not come with a bulb included. Purchase a suitable bulb separately and install it according to the bulb manufacturer’s instructions.
- If you need to dispose of the lamp, do not throw it away with your regular household waste.
Electrical and electronic equipment should be recycled correctly to avoid harm to human health and the environment. Please hand over the lamp to a designated collection point for recycling.
Note: The above instructions are based on the assumption that the lamp’s
model is not specified in the given text.
For more specific instructions, please refer to the complete user manual or
contact the manufacturer.
INSTRUCTION
OFF BUTTON
WARING
SYMBOLS
IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
Do not exceed the maximum wattage.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
The minimum distance between lamp and lit area.
Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
General maintenance
Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water
(<50°C) with a mild detergent to remove grease stains or similar. Never use
detergents containing abrasive or solvent. Only switch on the lamp once all
the water has evaporated.
Specifically for mouth-blown glass: Mouth-blown glass is formed manually.
Because of this unique process, air bubbles may occur in the glass, just as
the thickness of the glass may vary. This is to be seen as a natural
consequence of the manual process, and is what gives Mouth-blown glass its
character and organic look.
Always clean mouth-blown glass cold.
We recommend the use of a 90° C temperature resistant cable.
www.nordlux.com
Nordlux A/S • Ostre Havnegade 34 • DK- 9000 Aalborg
Mounting instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>