genie WNVR832P5AI PoE 32 Channel H.265 8MP NVR with 8HDD Bays Facial Recognition and LPR User Guide

: June 13, 2024
: GENIE

Table of Contents

WNVR832P5AI PoE 32 Channel H.265 8MP NVR with 8HDD Bays Facial
Introduction
HDD Installation
Rear Panel Instruction
Start Up and Shut Down
Login
Configurations and Connections
UPnP
Manual Recording and Playback
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WNVR832P5AI PoE 32 Channel H.265 8MP NVR
with 8HDD Bays Facial Recognition and LPR
User Guide

WNVR832P5AI PoE 32 Channel H.265 8MP NVR with 8HDD Bays Facial

Recognition and LPR

genie WNVR832P5AI PoE 32 Channel H 265 8MP NVR with 8HDD Bays Facial
Recognition and LPR

PoE 32 Channel H.265 8MP
NVR with 8HDD Bays, Facial
Recognition and LPR
WNVR832P5AI

Quick Start Guide

Please read these instructions carefully before operating the unit and keep for further reference.

Intro Section
Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only.
The contents of this manual are subject to change without notice.
CAUTION:

Please check the device and the accessories after getting the device. If there are any damages, shortages or defects, please contact your dealer immediately.

Introduction

The Genie WNVR832P5AI is a 32 channel high definition 8MP network video recorder with 8HDD bays. The WNVR832P5AI also supports face recognition and ANPR when used in conjunction with any “Expert” range of face recognition and LPR IP cameras. The WNVR832P5AI features up to 16 channel simultaneous playback as well as 16 PoE network ports which supports direct connection from the IP camera to the NVR. The NVR can support the latest H.265 and H.264 encoding streams. The WNVR832P5AI NVR has a dedicated iPhone and Android app (Super Live Plus) and are supplied with free Windows / MAC CMS software.

1.1 Product Features

Supports 32 CH 12MP / 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280×1024 / 960p /720p / 960H / D1 /CIF IP video input
H.265S/H.265+/H.265/H.264 coding
Intuitive and user-friendly Graphic User Interface ( GUI ), Windows style operation by
mouse
Multi-mode recording: manual / timed / motion / sensor / POS / AI recording
Playback : 16 CH simultaneous playback
Search : time slice, time, event, tag search and smart search
Supports face detection and comparison
Supports POS information overlay on live view and playback
Supports multiple VCA (Video Content Analytics) events, such as object abandoned/missing, region intrusion, tripwire, video exception, etc.
Express and flexible backup via USB, network and so on
Pentaplex : preview, record, playback, backup and remote access
DHCP, DDNS, Pepo network protocol
Remote control via Web Client or CMS : preview, playback, backup, PTZ and configuration
16 PoE network ports; PoE power supply supported
Multi-user online simultaneously
Dual stream technology for local storage with high definition, remote network transmission and remote surveillance with mobile device
Authorization management, log view and device status view
4K output, true high resolution display
Supports PTZ preset and auto cruise, up to 255 presets and 8 cruises
Supports NAT function and QR Code scanning by mobile phones
Powerful mobile surveillance by smart phones with iOS and Android OS
HTML5 compatible browser support with firmware virion 1.4.5 and above

1.2 Product Dimensions

genie WNVR832P5AI PoE 32 Channel H 265 8MP NVR with 8HDD Bays Facial
Recognition and LPR - Dimensions

1.3 Specification

Model	WNVR832P5AI

System

| OS| Embedded Linux
Mobile OS| iOS, Android

Video

| IP Video Input| 32 channel IPC input
Incoming Bandwidth| 256Mbps
Outgoing Bandwidth| 256Mbps
IP Video Input Resolution| 12MP / 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280 × 1024 / 960p / 720p / 960H / D1 / CIF
Output| HDMI × 1 : 3840×2160 @ 60fps / 3840×2160 @ 30fps / 1920×1080 / 1280×1024 / 1024×768, VGA × 1 : 1920×1080 / 1280×1024 / 1024×768
Compression| H.265S/H.265+/H.265/H.264

Audio

Record

| Record Stream| Dual stream recording
Resolution| 12MP @ 20fps, 8MP/ 6MP / 5MP / 4MP / 3MP / 1080p / 1280×1024 / 960p / 720p / 960H / D1 /CIF @ 30fps (NTSC) / 25fps (PAL)
Frame Rate| NTSC: 30fps, PAL: 25fps
Mode| Manual / Timed / Motion / Sensor /POS / AI recording
ANR| Automatic network replenishment (Yes)

Face Recognition

| Channel| 32 CH
Face Picture Database| 32 libraries, 5000 face pictures
Computing Capability| 180 pictures / minute
Face Picture Search| Search by picture is supported
Database Management| Add, modify, delete and search face pictures
Face Picture Adding| Add face pictures through App, Web and external import
External Face Picture Enrolment| Resolution: 128×128~920×1080 Size: ≤ 70KB Format: jpg & jpeg
Face Picture Comparison| Supports allow list and block list alarm
Face Track| Yes
Map of Face Track| Resolution: 2560×1920 Size: ≤ 512KB
Format: jpg & jpeg
Statistic Graph of Face Information| Bar graph
Statistic Mode of Face Information| Statistics by day, week, month, quarter as well as customized time period

Playback

| Simultaneous Playback| Max 16 CH
Search| Time slice / Time / Event / Tag / Smart search
Smart Search| Highlighted colour to display the camera record in a certain period of time, different colours refers to different record events.
Function| Play, pause, FF, FB, digital zoom, etc.
Decoding Capability| Live View / Playback: 1CH 12MP/4CH 5MP/9CH 720p/16CH D1

Alarm

| Mode| Manual, Sensor, Motion, Exception, Smart events
Input| 16 CH local alarm input, supports IPC alarm input
Output| 4 CH
Triggering| Record, Snap, Preset, E-mail, etc.
Model| WNVR832P5AI
---|---

Network

Remote Monitoring

| Immix| Compatible with Immix via RTSP only (2-way audio not supported)
Sentinel| Yes, Firmware 1.2.0 or later
Remote Access| Internet Explorer (ActiveX), HTML5 compatible browser support with firmware version 1.4.5 and above

Backup & Storage

| Local Backup| USB stick, USB mobile HDD
Network Backup| Yes
Storage| HDD: SATA x 4, Max. 10TB per HDD

Port

Others

HDD Installation

This series of the product supports 8 SATA hard drives. Please make sure that the device is powered off before the installation. The pictures of the installation are for reference only.

Remove the cover and loosen the screws to take out two mounting bars.
Get ready the HDDs installed and fix the HDDs on the mounting bar (For installing the HDDs well, please fix the round screw holes first).
Install the two mounting bars with HDDs back to the device (It is recommended to install the copper-pillar provided in case the HDDs are damaged by external forces).
Connect the power and data cables.
Install back the cover and secure it with the screws.
Note: Please check the inside structure of the device and make sure that the cables are connected well before installing the cover back. Please format the HDD before using.

Rear Panel Instruction

The interfaces of the rear panel are for reference only.

genie WNVR832P5AI PoE 32 Channel H 265 8MP NVR with 8HDD Bays Facial
Recognition and LPR - Rear Panel

Name	Description
PoE Ports	PoE network ports, connect to PoE IP camera
LAN	Network port
e-SAT	Connect t e-SATA o HDD with e-SATA interface
VGA	Connect to monitor
HDMI	Connect to high definition display device
USB	Connect to USB storage device or USB mouse
AUDIO OUT	Audio output
AUDIO IN	Audio input
P/Z	P/Z; Connector for PTZ
K/B	K/B; Connector for keyboard
ALARM IN	Alarm input, connectors for sensors
ALARM OUT	Alarm output
GND	Ground

Start Up and Shut Down

Startup

Connect the monitor and the power.
The device will boot and the power indicator will display blue.
A wizard window will pop up.

Shutdown
Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking “OK” button. Then disconnect the power.

The default username is admin and the default password is 123456. You must configure the wizard if you start the NVR for the first time and you may change the password when you configure the wizard for the first time. You can skip the settings wizard next time. Click “Start” and select “Login”. This will take you to see a login box. Enter the default username and password you set. Then you will see the live image.

Configurations and Connections

6.1 Network Configuration & Adding IP Camera
After you finish adding IP cameras, you can see the live images through the monitor of the NVR. The following will mainly introduce how to add the IP cameras via LAN/WAN.
LAN

Set the network of the NVR. Go to Start → Settings → Network → TCP/IP. Enter IP address, subnet mask, gateway, etc. If using DHCP, please enable DHCP in both the NVR and the router.
Go to Start → Settings → Network → Port. Enter HTTP port (the default value is 80), server port (the default port is 6036).
The internal ethernet port is the port which connects all the PoE ports with the NVR system. The PoE ports are available if the internal ethernet port is online. If it is offline, all the PoE ports will be unavailable. The IP address and subnet mask of the internal ethernet port can be changed to make the port in the same network segment with the IP cameras which directly connect to the PoE ports of the NVR.
Go to Start → Settings → Camera → Add Camera. The NVR will automatically refresh the cameras searched. The IPC which supports the Novib protocol may be added manually. If the IPC searched is not in the same local network as the NVR, you should select the device and click to modify the IP address.
Checkmark the device you want to add and then click “Add” button. The NVR will automatically refresh the cameras and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see the live image. You may select the added device and click button to modify channel, IP address, etc.

WAN

Set the network of the NVR. Go to Start → Settings → Network → Pepo. Enter static IP address or enable Pepo and then enter the user name and password received from your ISP.
Go to Start → Settings → Camera. Click “Add Camera” or behind the column of the search camera and select “Manually Add” to add the IP cameras. Enter IP address, server port, username and password of the IP camera. The IP camera must be connected over WAN. And here the IP address of the IP camera must be a WAN IP address.

UPnP

You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping.

Go to Start → Settings → Network → UPnP, and enable UPnP and then click “Apply” button to save.
Enable the UPnP function in the router.
Click “Refresh” button to refresh the UPnP status. If the UPnP status were still “Invalid UPnP” after refreshing it for several times, the port would be wrong. Please change the mapping type to “Manual” and then click to modify the port until the UPnP status turns to “valid UPnP”.

NAT

NAT Settings

The NVR shall be powered on and connected to the network.
Go to Start → Settings → Network → TCP/IP. You can obtain the IP address, subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. Please make sure the network segment is the same as that of the network which is used.
Set the preferred or alternative DNS Server. Click “Apply” to save the parameters.
Go to Start → Settings → Network → NAT tab. Enable NAT and select the NAT Server Address (The default NAT Server Address is nat.autonat.com). Click “Apply” to save the parameters.

NAT Access
After finishing the NAT settings, you can enter www.autonat.com in the address bar of your browser and then press enter to go to the following interface. If you are the first time to access the NAT, you shall download and install the plug- in according to the tips. After installing the plug-in successfully, it will pop up the login box.

Device Serial Number:
Click on the menu bar at the bottom of the live interface to check the serial number or go to Start → Settings → Network → Network Status to check the serial number of the NVR).
Username:
The username of the NVR. The default username is admin.
Password:
The password of the NVR. The password is set by yourself when you configure the wizard for the first time.

Manual Recording and Playback

9.1 Manual Recording
Before recording, please install and format a HDD. In the live interface you can see the menu toolbar. Click button to start recording. Click it again to stop recording. You can also click to check the status of the recording. genie WNVR832P5AI PoE 32 Channel H 265 8MP NVR with 8HDD Bays
Facial Recognition and LPR - NAT Access1

9.2 Playback
Instant Playback
Click “Instant Playback” in the right-click menu of the camera’s preview window to select or drag the playback progress bar to change the playback time to play back the record.

General Playback
Click on the tool bar at the bottom of the live preview interface or click Start → Playback to go to the playback interface as shown below. You can also add the playback cameras manually. Click in the playback window to pop up the “Add Camera” window. Check the cameras in the window and then click “Add” to add playback camera. The record files of the added playback camera will be played in the playback interface. genie WNVR832P5AI PoE 32 Channel H 265 8MP
NVR with 8HDD Bays Facial Recognition and LPR - NAT
Access2