Blackview AirBuds 10 Open-ear Sport TWS Earbuds User Guide

AirBuds 10
Open-ear Sport TWS Earbuds
USER GUIDE

■ Product Introduction

■ Equipment operation

1. Power on: Open the charging case, and the headphones will automatically power on.
2. Shut down: Put the headphones into the charging case and close the charging case to shut down.
3. Restore factory settings:
   Double touch + long press 5S; when the white light flashes for 3 times, the headphones will enter the factory reset mode, put the headphones into the charging case, the headphones status will be restored to the factory settings. You can open the cover to re-pair.

■ Bluetooth pairing

Method 1: When connecting for the first time, open the charging case, the two headphones are in the charging case, the indicator light of the charging case is red; the headphones enter the pairing state and flash red and white lights; turn on the Bluetooth of the device, and select “AirBuds 10” for connection.
Method 2: When the device is connected to the headphones, put the headphones into the charging case. Press for 3s, the headphones will enter the pairing state and flash red and white lights. Turn on Bluetooth for your new device and select “AirBuds 10” for connection.
Note: For some smartphones, after you select “AirBuds 10” for Bluetooth pairing, you may be asked to reconfirm the pairing in a pop-up window.
Turn off the Bluetooth switch of the phone to disconnect the headphones.

■ Operation control

Music mode

| ● Single touch, L volume -, R volume +
---|---
| ●● Double touch, L play/pause, R voice assistant
| ●●● Three touch, L previous, R next

Monaural mode

| ● Single touch, L/R volume +
---|---
| ●● Double touch, L/R voice assistant
| ●●● Three touch, L/R next

■ Talk mode

●● Incoming call double touch to answer
Calling/outgoing call—-Double touch, hang up/cancel outgoing call
During a call, the second call comes in Double touch, answer the second call, put the first call on hold
Incoming call —— long press 2S, reject the call Three-party call ——— long press 2S, switch between two calls freely

■ Light indication

■ Charging

1. When the battery of the headphones is low, the red light will flash. You can put the headphones into the charging case and close the charging case.
2. When the power of the charging case is low, the red light will flash when the charging case is opened, prompting to charge the charging case;

Note: Before charging, please dry the USB charging port completely, and use the attached or certified USB-C charging cable to connect the charging case to the power supply for charging; the white light of the charging case flashes during charging, and the white light is always on when fully charged.

■ Wearing

Put the headphones on and adjust them to a comfortable position.

■ Specifications

Model: AirBuds 10
Bluetooth version : 5.3
Call encoding format: SBC/AAC
Noise Cancellation: ENC
Microphone: X1
Headphone status indicator LED: white, red
Battery capacity: 45mAh
Speaker: 10mW
Music battery life: ≥5.5H
Call life: 4H
Charging voltage: 5V±0.2V| Bluetooth frequency: 2.401-2.480
Bluetooth effective distance: >10M
Dynamic frequency response: 20-20KHz
Standby time: 550H
Charging time: <1.5H
Charging case
Battery capacity: 550mAh
Charging time: 1.5H
Charging interface: Type-C
Operating temperature: 0-45°C
---|---

■ Answers for Common Questions

1. The bluetooth headset cannot be switched on.

Reason: The battery in the charging compartment is low or the power of the bluetooth headset is low. Solution: Put the headset into the charging box, close the cover, and charge the charging box for more than 1 hour before use.

2. The phone cannot search for bluetooth headset.

Reason: 1. The Bluetooth headset is not in the pairing state; Solution: Put both headphones into the charging case, press and hold UR for 3 seconds to enter the pairing state, and the red and white lights will flash. Reason:2. There are mobile phone bluetooth program errors; Solution: After the bluetooth of the mobile phone is restarted, clear all pairing data stored in the the mobile phone; Search for bluetooth again.

3. There is no sound from the headset speaker

Reason: 1. Turn the volume of the mobile phone and headset to the maximum and confirm whether it is caused by volume adjustment. Solution: When the headset is connected, adjust the volume of the mobile phone; Reason: 2. The Bluetooth headset is not properly connected with the mobile phone. Solution: Reconnect bluetooth and mobile phone through pairing. Reason: 3. The Bluetooth headset is not within the valid working range. Solution: Keep the headset within 10 meters of the mobile phone, and there are no large objects, walls and other obstacles between the headset and the device.

4. The headset doesn't send messages or the voice is low.

Reason: 1. The Bluetooth headset is too far from the mouth; Solution: The bluetooth headset should be worn on the ear for normal use; Reason: 2. The microphone hole of Bluetooth is blocked or water has entered; Solution: Remove the blockage of the microphone hole or prevent water from entering the microphone hole.

5. The headphone get stuck or disconnected when talking or listening to music.

Reason: 1. The Bluetooth headset is too far away from the mobile phone or there are obstacles. Solution: 1. Keep the headset within 10 meters of the mobile phone, and there are no large objects and walls between the headset and the device. Be careful not to cover the bluetooth headset with your hand. In order to maintain the continuous stability of the signal, please try to keep the bluetooth and the mobile phone in the same direction. Reason: 2. There is a problem with the bluetooth signal of the mobile phone or there is strong signal interference nearby. Solution: It is best not to make the mobile phone close to metal objects. You can also change another mobile phone or try another place. Reason: 3. The power of bluetooth headset is insufficient. Please charge the headset as soon as possible. Solution: Please charge the headset as soon as possible.

6. There is no sound in the headset during voice call, and the sound comes out of the mobile phone.

Reason: The headset is operated during a voice call or call. Double click the headset. Solution: Turn off the bluetooth of the mobile phone and then tum it on, or put the headset into the box, close the cover, tum off the headset and then open the cover; The headset does not support the connection or hanging up of voice calls. If there is a voice call, please connect or hang up on the mobile phone. Note: at present, the headset only supports incoming calls from GSM cards, not app network calls.

7. After the headset is put into the box and the cover is closed, the headset is not disconnected.

Reason: 1. The charging box is completely dead; Solution: Charge the charging box; Reason: 2. The headset is not put into the box properly, and the communication between the headset and the base is abnormal. Solution: Open the charging case again, take the earphones out of the case, and put them back into the case. The red light on the charging case will flash once when the headphones are in the case. Close the cover. Reason: 3. The charging box is damaged. Solution: Replace the charging box.

■ Attention

• Please do not disassemble this product by yourself.
• Please use standard charging cable and adapter to avoid damage and accidents.
• Please aviod using corrosive cleaning detergent to clean this product.
• Please avoid product usage in the rain and keep away from heating or fire.

■ Maintenance

Please follow the following suggestions to prolong product working life.

• Keep product dry and don’t put in damp places in case of affecting internal circuit.
• Aviod product usage during intense sporting or on sweating occasions in case sweat infiltrate into product and cause damages.
• Keep off sunlight or high temperature in case of shortening working life of electric parts battery damage, plastic parts deformation.
• Keep off intense vibration and impact from hard material in case of internal circuit damages.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Shenzhen DOKE Electronic Co.,Ltd
Address: 13/F, Wei Dong Long Business Building B, Mei Long Ave, Long Hua New District Shenzhen.

https://www.blackview.hk/
Follow Blackview communtiy, a place where you
can share and discuss with Blackview user
keep posted with most up-to-day news

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>