SAFETAGPLUG Tracking Device User Manual
- June 13, 2024
- SAFETAG
Table of Contents
SAFETAGPLUG Tracking Device
How do I work
-
The tracker is always on. Whilst the tracker is in motion, it will report it’s location every 30 seconds.
-
The tracker draws an extremely low amount of power from your car battery. It would take over 2 years of your car being off for the unit to deplete your battery.
-
The unique tracker IMEI can be found here.
-
D The signal strength and battery level of the tracker reported on the app and website is refreshed every 3 minutes.
You must not open the tracker casing under any circumstances. -
The tracker uses a special kind of SIM that connects to the strongest network available in any location. The SIM is locked to the tracker and will not work with any other device.
Installation
-
First locate the OBD-2 port on your vehicle. The location of your car model’s OBD port can be found easily using Google.
-
Assuming that the tracker has been activated, the tracker will be ready to go, just plug it in. It will take around 15 minutes to come online and after this period require a short 5 minute drive to calibrate. Please see the activation guide for more details.
Need Help
If you’re having any problems with our system, you can reach out to our 8AM-
8PM help desk, directly at
[email protected]
All queries have been answered within 12 hours.