SafeTag Tracking Rechargeable Magnetic GPS Tracker User Guide
- August 22, 2024
- SafeTag Tracking
Table of Contents
SafeTag Tracking Rechargeable Magnetic GPS Tracker User Guide
Installation
Locate the OBD-2 port on your vehicle. The location of your car model’s OBD-2 port can be found easily using a Google search.
Once you have located the OBD-2 port, insert the tracker. Make sure that the vehicle trim is not preventing the tracker from being fully inserted.
How Do I Work?
Whilst the tracker is in motion, it will report it’s location every 40 seconds.
When your tracker stops moving the tracker goes to sleep (standby mode).
Your tracker also reports an update to signal strength and battery level every 3 minutes
The SIM is locked to the tracker and won’t work with any other device, do not remove it under any circumstances.
-
Register an account at www.safetagtracking.com
-
Log in, navigate to the Manage section at the top and select Add Trackers.
-
Activate your tracker by purchasing a subscription and your tracker will now take up to 30 minutes to come online.
You will only be charged after the end of your 7-day free trial. -
Insert the tracker into your vehicles OBD-2 port.
-
At any point after the 30 minutes, take the device for a 15 minute calibration drive.
-
Track your tracker at www.safetagtracking.com/track or on our mobile app: Safe Tag Tracking
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>