aidapt VM900 Handy Reacher Instructions
- June 13, 2024
- Aidapt
Table of Contents
aidapt VM900 Handy Reacher Instructions
INTRODUCTION
Thank you for deciding to purchase this Handy Reacher from Aidapt. Our Handy Reachers are manufactured from the finest materials and components available. When used correctly they are designed to give many years of reliable trouble- free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp
instruments as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a
fault, do not use your product, but contact your supplier for support.
INTENDED USE
The reacher is designed to assist in reaching and lifting items from the floor, table or shelf. It can also be used in some situations as a dressing aid; although we would stress caution is necessary when using the reacher with tights or stockings due to the fine nature of the material of these garments.
INSTRUCTIONS FOR USE
Using the reacher is simple, place the grip over the object you wish to lift and squeeze the trigger. Ensure the moving finger of the grip and the main frame of the reacher are properly secured round the object and lift.
Place the object you have lifted safely onto a flat and level surface and release the trigger.
Always assess the suitability of an item before picking it up; do not attempt
to carry heavy or fragile items with your reacher.
Do not under any circumstances attempt to use the reacher to lift or move hot
objects, this could lead to serious injury.
CLEANING
Clean your Handy Reacher using a non-abrasive cleaner or mild detergent with a
soft cloth.
Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may seriously
damage the product beyond repair and should not be used. Always ensure that
you wipe dry the equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check
all components for their safety.
This includes:
- Tightness of all nuts/ bolts/castors
- Other screw in/ bolt in/ push in components.
If in any doubt, please do not issue or use, but immediately contact your supplier for service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
- Specifically, check the tension of the cable string, which attaches to the trigger and gripper (finger) section of the reacher.
- If for any reason the cable string has become slack, carefully undo the string, readjust the tension and re-tie the string.
- Squeeze the trigger to ensure that the gripping arm fits tightly, safely and square to the mian frame. If not, repeat the steps above.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming
part of or establishing any contractual or other commitment by Aidapt
Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no
warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the
product.
Please do not hesitate to contact the person who issued this product to you or
the manufacturer (detailed below) if you have any queries concerning the
assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web:
www.aidapt.co.uk
Email: accounts@aidapt.co.uk •
adaptations@aidapt.co.uk •
sales@aidapt.co.uk
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>